16V

16V
Antenna 16 V passive, VHF, with cable 4.5 m
Antenna 16 V passive, VHF, with cable 4.5 m
16 V antenna with 40 cm radiator length.
The antenna has an antenna cable of 20 cm length and DIN plug. An extension cable with DIN plug and DIN socket of 4.5 m length is included.
With adapter 8495 in combination with 41107 or 41108, the antenna can also be used with VW for DAB reception.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: 15033

15033
24,99 EUR
incl. 19% tax excl. Shipping costs
Antenna 16V active, VHF, RAKU 2 socket (HC97)
Antenna 16V active, VHF, RAKU 2 socket (HC97)
The 16V roof antenna can be used for new installations or as a replacement antenna e.g. for VW, SKODA, SEAT and similar antenna types.
The antenna has an amplifier which is directly controlled via the antenna line for the above-mentioned brands.
Please note:
Some aftermarket radios have the option of activating "phantom power" in the settings menu.
On all other vehicles without phantom power, the antenna cannot be used.

Technical data:
12 VDC
50 Ohm
Power consumption: 33mA
Gain: FM 18 - AM 10 dB
Cable length 40 cm with RAKU connection socket


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: 15043

15043
37,98 EUR
incl. 19% tax excl. Shipping costs
Antenna 16 V active, VHF, with cable 4.5 m
Antenna 16 V active, VHF, with cable 4.5 m
16 V antenna with 40 cm radiator length.
The antenna has an antenna cable of 20 cm length and DIN plug. An extension cable with DIN plug and DIN socket of 4.5 m length is included. The antenna line also has a parallel control line for the power supply of the amplifier.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: 15032

15032
38,98 EUR
incl. 19% tax excl. Shipping costs
16V Roof antenna passive - FM/DAB+ with optional splitter
16V Roof antenna passive - FM/DAB+ with optional splitter
Roof antenna with the following features:
- Low installation height due to the use of a short rod
- Low installation depth (~15 mm)
- Low installation effort

Can be used with 4723_01 (amplifier) and 4724_02 (radio splitter for splitting FM/ DAB+ frequencies) or 4721_01 (amplifier AM/ FM/ DAB, DAB+)

Additional information:
- Mounting: Roof mounting
- Additional info: Flex antenna, passive
- Category/special feature: passive single-cable solution for FM and DAB+

Dimensions:
- Width: 56 mm
- Height: 270 mm
- Length: 45 mm
- Weight: 0.12 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2116_01

ATTB_2116_01
42,99 EUR
incl. 19% tax excl. Shipping costs
Calearo/MTA 16V VHF roof antenna active 60°, cable 5,6m, ISO connector
Calearo/MTA 16V VHF roof antenna active 60°, cable 5,6m, ISO connector
Calearo 16V roof antenna 60° 12V - ISO connector
Connections on the antenna:
Fakra plug for VHF
Flat connector for control cable
Connections on the cable:
Fakra socket to ISO plug
flat plug to open end

Frequency:AM/FM0,15-1,71 / 87,5-108 MHz
Plug: ISO
Power supply:12V
Cable:L=5,6m Z= 75O C= 67pF/m
Antenna rod:L= 40 cm Inclination= 60 °
Dimensions: L= 6cm W= 4,3 cm
Mounting type: rear roof antenna
Mounting hole: 15x15mm or ø19
Radiator length: 40,5 cm

*************************************************************************************************
Product safety information:
Brand: Calearo
Manufacturer: MTA S.p.A., V.le dell'Industria, 12 - 26845 Codogno (LO) – ITALY, info@mta.it
*************************************************************************************************

Art.Nr: 7677901

7677901
59,00 EUR
incl. 19% tax excl. Shipping costs
16V antenna active - FM, 23 cm, with Raku 2 connection
16V antenna active - FM, 23 cm, with Raku 2 connection
Roof antenna with the following functions and features:
- Active radio reception for LMK/UKW
- 12 V power supply for the amplifier optionally via inner conductor of the radio connection or DIN plug-in sleeve
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort
- Cable type: RG 174
- Services: AM/FM
- Connectors: RAKU2

Spare radiator: 4626_11

Additional information:
- Mounting: Roof mounting
- Additional info: Flex antenna, active
- Category/Special feature: Retrofit solution with RAKU connection (VW Golf old)

Dimensions:
- Width: 56 mm
- Height: 270 mm
- Length: 45 mm
- Weight: 0.125 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2117_02

ATTB_2117_02
59,99 EUR
incl. 19% tax excl. Shipping costs
12V antenna active 70 degrees for FM/DAB+ in 16V design
12V antenna active 70 degrees for FM/DAB+ in 16V design
Excellent roof antenna with the following features:
-flat angle of only 70 degrees, also ideal for front mounting if roof is not exactly horizontal.
- Antenna with short rod, length approx. 23 cm, in 16 V design.
- DAB+ reception 174-237 MHz & 1452-1492 MHz
- VHF/FM reception 87-108 MHz
- 12 V external power supply (no phantom powering possible)
- Low installation depth approx. 16 mm
- Gain: FM: 7 dB
- Gain: DAB+: 12dB
- Power supply: 12 volts, 100 mA
- Temperature range (-40 degrees to + 85 degrees Celsius)
- Impedance: 50 Ohm (DAB+); 75-150 Ohm (FM)
- Cable to antenna:
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey , code G

Note: This antenna is delivered without cable!

Recommended LOWLOSS extension cable:

9552: 5 metre lowloss cable for VHF/FM (with Fakra socket and DIN plug) and 5 metre lowloss cable for DAB+ (with Fakra socket and SMB socket.
9572: 7.5 metre lowloss cable for VHF/FM (with Fakra socket and DIN plug) and 7.5 metre lowloss cable for DAB+ (with Fakra socket and SMB socket).

or UNI LOWLOSS sets with different connectors for FM. With this cable set, 99% of the car radios on the market can be connected with our antennas. The sets consist of 2 LowLoss antenna cables with Fakra colour coding for VHF and DAB+.

- Lowloss cable Fakra socket - Fakra socket, beige
- Lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey
Adapter for VHF:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

Variants:
UNI-2L500: Set with 5 m cable length
UNI-2L750: Set with 7,5 m cable length
UNI-2L1000: Set with 10,0 m cable length

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punching and bending technology by Rosenberger (Fakra-SF).

Technical data of the low loss cable:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional
tinned copper braiding
Outer diameter: 3.6 mm

This antenna is also available with high quality LowLoss antenna extensions, (radio side DIN plug for FM and SMB socket for DAB+):

DZ_2113_52 with 2 extension cables 5.0 m (DIN plug/SMB socket).
DZ_2113_72 with 2 extension cables 7.5 m (DIN plug/SMB socket)
DZ_2113_L500 with 2 extension cables 5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L750 with 2 extension cables 7.5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L1000 with 2 extension cables 10 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: DZ_2113_01

DZ_2113_01
59,99 EUR
incl. 19% tax excl. Shipping costs
Calearo/MTA 16V short antenna active FM/DAB+ with Fakra connectors only
Calearo/MTA 16V short antenna active FM/DAB+ with Fakra connectors only
16V COMBI UKW/DAB+
Connections to antenna:
White fakra connector for FM+

Black Fakra plug for DAB+
Power supply: 12 Volt

Frequency

AM=0,52-1,71 MHz
FM=76-108 MHz
III Band=174-240 MHz
Lband=1452-1492MHz

Gain:III Band=14dBi
Mounting hole: 15x15mm or ø19
Radiator length: 20 cm

Note: Delivery without cable. We recommend the cable sets 9552 or 9572.

*************************************************************************************************
Product safety information:
Brand: Calearo
Manufacturer: MTA S.p.A., V.le dell'Industria, 12 - 26845 Codogno (LO) – ITALY, info@mta.it
*************************************************************************************************

Art.Nr: 7677855

7677855
69,00 EUR
incl. 19% tax excl. Shipping costs
12V Antenne aktiv 70 Grad für UKW/DAB+ im 16V Design
12V Antenne aktiv 70 Grad für UKW/DAB+ im 16V Design
Same as antenna DZ_2113_01 but with longer radiator for better reception.

Excellent roof antenna with the following features:
-flat angle of only 70 degrees, also ideal for front mounting if roof is not exactly horizontal.
- Antenna with short rod, length approx. 41 cm, in 16 V design
- DAB+ reception 174-237 MHz & 1452-1492 MHz
- VHF/FM reception 87-108 MHz
- 12 V external power supply (no phantom powering possible)
- Low installation depth approx. 16 mm
- Gain: FM: 7 dB
- Gain: DAB+: 12dB
- Power supply: 12 volts, 100 mA
- Temperature range (-40 degrees to + 85 degrees Celsius)
- Impedance: 50 Ohm (DAB+); 75-150 Ohm (FM)
- Cable to antenna:
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey , code G

Note: This antenna is delivered without cable!

Recommended LOWLOSS extension cable:

9552: 5 metre lowloss cable for VHF/FM (with Fakra socket and DIN plug) and 5 metre lowloss cable for DAB+ (with Fakra socket and SMB socket.
9572: 7.5 metre lowloss cable for VHF/FM (with Fakra socket and DIN plug) and 7.5 metre lowloss cable for DAB+ (with Fakra socket and SMB socket).

or UNI LOWLOSS sets with different connectors for FM. With this cable set, 99% of the car radios on the market can be connected with our antennas. The sets consist of 2 LowLoss antenna cables with Fakra colour coding for VHF and DAB+.

- Lowloss cable Fakra socket - Fakra socket, beige
- Lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey
Adapter for VHF:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

Variants:
UNI-2L500: Set with 5 m cable length
UNI-2L750: Set with 7,5 m cable length
UNI-2L1000: Set with 10,0 m cable length

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punching and bending technology by Rosenberger (Fakra-SF).

Technical data of the low loss cable:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional
tinned copper braiding
Outer diameter: 3.6 mm

This antenna is also available with high quality LowLoss antenna extensions, (radio side DIN plug for FM and SMB socket for DAB+):

DZ_2113_52 with 2 extension cables 5.0 m (DIN plug/SMB socket).
DZ_2113_72 with 2 extension cables 7.5 m (DIN plug/SMB socket)
DZ_2113_L500 with 2 extension cables 5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L750 with 2 extension cables 7.5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L1000 with 2 extension cables 10 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: DZ_2113_02

DZ_2113_02
69,00 EUR
incl. 19% tax excl. Shipping costs
16V antenna active 76 degree tilt angle - FM/DAB+ with fakra connections
16V antenna active 76 degree tilt angle - FM/DAB+ with fakra connections
Roof antenna with the following functions and features:
- DAB reception, active and low-noise in band III, L-band passive.
- Radio reception, active and low-noise for LMK/UKW
- 12 V power supply for the amplifier optionally via inner conductor of the cable connections or DIN plug-in sleeve
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort only one mounting hole for 2 functions
- Cable type: RG 174
- Services: AM/FM, DAB+
- Connectors: FAKRA(m) G, FAKRA(m) B

Spare rod: 4626_11

Additional information:
- Mounting: Roof mounting
- Additional info: Kombiflex roof antenna
- Category/special feature: Active antenna with separate signal routing

Dimensions:
- Width: 56 mm
- Height: 270 mm
- Length: 45 mm
- Weight: 0.12 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2118_01

ATTB_2118_01
74,99 EUR
incl. 19% tax excl. Shipping costs
12V antenna active FM/DAB+ with 2 cables 5m (DIN plug/SMB socket)
12V antenna active FM/DAB+ with 2 cables 5m (DIN plug/SMB socket)
Excellent roof antenna with the following features:
-flat angle of only 70 degrees, also ideal for front mounting if roof is not exactly horizontal.
- Antenna with short rod, length approx. 23 cm, in 16 V design.
- DAB+ reception 174-237 MHz & 1452-1492 MHz
- VHF/FM reception 87-108 MHz
- 12 V external power supply
- Low installation depth approx. 16 mm
- Amplification: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 100 mA
- Temperature range (-40 degrees to + 85 degrees Celsius)
- Impedance: 50 Ohm (DAB+); 75-150 Ohm (FM)
- Cable to antenna:
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey , code G

Note: This antenna is delivered with the cable set 9552.

9552: 5 metre lowloss cable for VHF/FM (with Fakra socket and DIN plug) and 5 metre lowloss cable for DAB+ (with Fakra socket and SMB socket).

Further versions:

DZ_2113_72 with 2 extension cables 7.5 m (DIN plug/SMB socket).
DZ_2113_L500 with 2 extension cables 5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L750 with 2 extension cables 7.5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)

DZ_2113_L1000 with 2 extension cables 10 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: DZ_2113_52

DZ_2113_52
79,00 EUR
incl. 19% tax excl. Shipping costs
Flex antenna, DAB+, DVB-T, BIII, B IV/V, 0.16m RG 58, FME (m)
Flex antenna, DAB+, DVB-T, BIII, B IV/V, 0.16m RG 58, FME (m)
Highest quality and reliability "Made in Germany".

The ATTB 2101.01 roof antenna is an antenna developed and manufactured by Antennentechnik Bad Blankenburg for retrofitting vehicles. ATTB specialises in radio-based networking solutions for various industries and applications. With its own research, development and production, ATTB has stood for the highest quality and reliability "Made in Germany" since 1919.

We drive connectivity: networking without compromise

The ATTB Flex Roof Antenna 2101.01 establishes reliable, high-performance radio connections in the field of broadcasting and is suitable for mobile outdoor use. It undergoes the most stringent testing processes, is manufactured in Germany from high-quality components and offers first-class transmission or reception performance - even under the most difficult conditions.

Frequency bands and communication services

The ATTB 2101.01 Flex roof antenna covers two DVB-T frequency bands for the reception of digital television.

- DVB-T BIII (174 - 230 Mhz)
- DVB-T BIV/V (470 - 862 Mhz)

Special features and characteristics

- Passive flexible antenna
- Low-noise antenna rod
- Low installation depth (15 mm)
- Cable length: 0.16m

Dimensions:
- Width: 56 mm
- Height: 271 mm
- Length: 45 mm
- Weight: 0.115 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2101_01

ATTB_2101_01
79,99 EUR
incl. 19% tax excl. Shipping costs
16V antenna active - FM/DAB+/GSM with fakra connections
16V antenna active - FM/DAB+/GSM with fakra connections
Roof antenna with the following functions and features:
- DAB reception, active and low-noise in the B III range, L-band passive.
- Radio reception, active and low-noise for AM/FM
- Mobile radio reception in the range GSM900/1800, UMTS
- 12 V power supply for the amplifiers either via inner conductor of the cable connections (only one connection recommended) or DIN plug-in sleeve
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort - only one mounting hole for 3 functions
- Interchangeable with conventional flex antennas
- Cable type: RG 174
- Services: UMTS, AM/FM, 2G, GSM, DAB+, 3G
- Connectors: FAKRA(m) D, FAKRA(m) G, FAKRA(m) B

Especially suitable for:
- Analogue and digital broadcasting
- mobile radio

Spare radiator: 4626.11

Additional information:
- Mounting: Roof mounting
- Additional info: Kombiflex roof antenna
- Category/special feature: active antenna with separate signal routing

Dimensions:
- Width: 56 mm
- Height: 270 mm
- Length: 45 mm
- Weight: 0.125 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2121_01

ATTB_2121_01
82,49 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, FM/DAB+ 41 cm ; 5m cable, FAKRA/DIN/SMB connectors
Antenna set A10, FM/DAB+ 41 cm ; 5m cable, FAKRA/DIN/SMB connectors
The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 7,5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7,5 m, Fakra female - SMB female, for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T0L750UNI



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10T0L500UNI

A10T0L500UNI
86,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, FM/DAB+ 41cm; 3,5m cable, FAKRA/DIN/SMB connectors
Antenna set A10, FM/DAB+ 41cm; 3,5m cable, FAKRA/DIN/SMB connectors
According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height is not important, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 3,5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 5 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10LT0L350UNI

A10LT0L350UNI
89,90 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, FM/DAB+ 41cm; 5m cable, FAKRA/DIN/SMB connectors
Antenna set A10, FM/DAB+ 41cm; 5m cable, FAKRA/DIN/SMB connectors
According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height is not important, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 5 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10LT0L500UNI

A10LT0L500UNI
98,00 EUR
incl. 19% tax excl. Shipping costs
16V antenna - FM/DAB+ with 7,5m extension cable (DIN plug/SMB jack)
16V antenna - FM/DAB+ with 7,5m extension cable (DIN plug/SMB jack)
Excellent roof antenna with the following features:
-flat angle of only 70 degrees, also ideal for front mounting if roof is not exactly horizontal.
- Antenna with short rod, length approx. 23 cm, in 16 V design.
- DAB+ reception 174-237 MHz & 1452-1492 MHz
- VHF/FM reception 87-108 MHz
- 12 V external power supply
- Low installation depth approx. 16 mm
- Amplification: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 100 mA
- Temperature range (-40 degrees to + 85 degrees Celsius)
- Impedance: 50 Ohm (DAB+); 75-150 Ohm (FM)
- Cable to antenna:
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Note: This antenna is supplied with cable set 9572.

9572: 7.5 metre lowloss cable for VHF/FM (with Fakra socket and DIN plug) and 7.5 metre lowloss cable for DAB+ (with Fakra socket and SMB socket.

Further versions:

DZ_2113_52 with 2 extension cables 5.0 m (DIN plug/SMB socket).
DZ_2113_L500 with 2 extension cables 5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L750 with 2 extension cables 7.5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L1000 with 2 extension cables 10 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: DZ_2113_72

DZ_2113_72
99,00 EUR
incl. 19% tax excl. Shipping costs
Calearo/MTA 16V Triplex roof antenna active 60°, Fakra (m) 0,3m
Calearo/MTA 16V Triplex roof antenna active 60°, Fakra (m) 0,3m
MAIN FEATURES

DAB digital radio and AM/FM analogue radio reception
GNSS module: support GPS, Galileo and GLONASS systems for satellite localization and navigation
Traditional rod: guarantee an optimal quality of reception in all conditions

MAIN TECHNICAL INFORMATION

AM/FM radio connector: FAKRA male WHITE
DAB radio connector: FAKRA male BLACK
GNSS connector: FAKRA male BLUE
AM/FM and DAB power supply: 12 Volt with Dedicated cable
GNSS power supply: 3-5 Volt in Phantom mode
Rod lengh: 41 cm
Consumption: 75 mA max
Coachwork drilling: support square hole 15x15 mm and round hole with19 mm diameter

*************************************************************************************************
Product safety information:
Brand: Calearo
Manufacturer: MTA S.p.A., V.le dell'Industria, 12 - 26845 Codogno (LO) – ITALY, info@mta.it
*************************************************************************************************

Art.Nr: 7677840

7677840
99,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, FM/DAB+ 41 cm ; 7,5m cable, FAKRA/DIN/SMB connectors
Antenna set A10, FM/DAB+ 41 cm ; 7,5m cable, FAKRA/DIN/SMB connectors
The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 7,5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7,5 m, Fakra female - SMB female, for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T0L750UNI



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10T0L750UNI

A10T0L750UNI
108,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A1, FM/DAB+; 5m cable, FAKRA/DIN/SMB connectors
Antenna set A1, FM/DAB+; 5m cable, FAKRA/DIN/SMB connectors
The antenna A1 is according to our tests, the best antenna at the moment for optimal radio reception in camper van. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled!

Delivery contents:

Antenna A1
Lowloss cable 5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 5 m, Fakra female - SMB female , for DAB+

Roof antenna with the following features:
- 16V antenna with short rod, length about 23 cm.
- DAB reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- low installation depth (approx. 15 mm)
- gain: FM: 14dB
- Gain: DAB+: 10dB
- gain: AM: 6dB
- power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 145 mm, Fakra plug, white
- Cable: RG 174, DAB+ 185 mm, Fakra plug, grey

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductivity values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T0L500DIN
A1T0L500DYN

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A1T0L500UNI

A1T0L500UNI
129,00 EUR
incl. 19% tax excl. Shipping costs
16V antenna active - FM/DAB+ set with 5m cable DIN/SMB
16V antenna active - FM/DAB+ set with 5m cable DIN/SMB
Roof antenna with the following functions and features:
- DAB reception, active and low-noise in band III, L-band passive.
- Radio reception, active and low-noise for LMK/UKW
- 12 V power supply for the amplifier optionally via inner conductor of the cable connections or DIN plug-in sleeve
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort only one mounting hole for 2 functions
- Cable type: RG 174
- Services: AM/FM, DAB+
- Connectors: FAKRA(m) G, FAKRA(m) B

Spare rod: 4626.11

Additional information:
- Mounting: Roof mounting
- Additional info: Kombiflex roof antenna
- Category/Special feature: Active antenna with separate signal routing

Dimensions:
- Width: 56 mm
- Height: 270 mm
- Length: 45 mm
- Weight: 0.12 kg
Extension cable:
- 1 piece 5 metre cable for FM/VHF (with Fakra socket and DIN plug)
- 1 piece 5 metre cable for DAB+ (with Fakra socket and SMB socket)

If the radio has an ISO input, the Dietz adapter, 8302, is also required.

Note:
In many vehicles with an active 16 V antenna, only a filtered FM signal is transmitted, i.e. the DAB+ signal is outside the transmitted frequency range.

Solution:
Remove the active roof antenna and replace it with an active roof antenna such as the one mentioned here.

This antenna is also available under the number, ATTB_2118_01 without the 2 extension cables.

Matching replacement antenna: ATTB_4626_11

Original article number: 2118.04

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2118_52

ATTB_2118_52
129,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna active - FM/DAB+ or DVB-T2 -facra connection
Combi-flex antenna active - FM/DAB+ or DVB-T2 -facra connection
Roof antenna with the following functions and features:
- DAB+ and DVB-T2 reception, active and low-noise in the B III, B IV/V ranges.
- Radio reception, active and low-noise for LMK/UKW
- Power supply for amplifier either as phantom power or via DIN plug-in sleeve
- Low-noise antenna rod
- Low installation effort - only one mounting hole
- Cable type: RG 174
- Services: AM/FM, DVB-T, DAB+
- Connectors: FAKRA(m) H, FAKRA(m) B

Accessories:
- Crossover 4738_01 for simultaneous use of DAB+ and DVB-T2
- Spare radiator: 4652_11

Highest quality and reliability "Made in Germany".

The ATTB 3792.01 roof antenna is an antenna developed and manufactured by Antennentechnik Bad Blankenburg for retrofitting vehicles. ATTB specialises in radio-based networking solutions for various industries and applications. With its own research, development and production, ATTB has stood for the highest quality and reliability "Made in Germany" since 1919.

We drive connectivity: networking without compromise

The ATTB Kombiflex roof antenna 3792.01 establishes reliable, high-performance radio connections in the field of broadcasting and is suitable for mobile outdoor use. It undergoes the most stringent testing processes, is manufactured in Germany from high-quality components and offers first-class transmission or reception performance - even under the most difficult conditions.

Frequency bands and communication services

The ATTB 3792.01 multifunction antenna covers several frequency bands and thus communication services. These include AM, FM, DAB+ and DVB-T.

In the broadcasting range, AM (0.15 -16 MHz), FM (87.5 - 108 MHz) and DAB+ (BIII, 174 - 240 MHz; L-band, 1452 - 1492 MHz) can be received.
The ATTB 3792.01 Flex roof antenna is also designed for reception of digital television DVB-T (DVB-T IV: 474 - 602 MHz; DVB-T V: 610 - 786 MHz)

Special features and characteristics

Active and low-noise DAB+ reception in band III
Active and low-noise DVT-T2 for digital television
Active antenna for AM/FM
Active and low-noise radio reception for LMK/UKW
Power supply for amplifier either as phantom power or via DIN plug-in sleeve
Low-noise antenna rod
Low installation depth (15 mm)
Low installation effort (only one mounting hole for 3 functions)
For simultaneous use of DAB+ and DVB-T2, the crossover 4738.01 is recommended

Dimensions:
- Width: 55 mm
- Height: 270 mm
- Length: 103 mm
- Weight: 0.154 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3792_01

ATTB_3792_01
129,00 EUR
incl. 19% tax excl. Shipping costs
16V antenna active - FM/DAB+ set with 5m cable DIN/SMB
16V antenna active - FM/DAB+ set with 5m cable DIN/SMB
Highest quality and reliability "Made in Germany".

The ATTB 2118.04 roof antenna is an antenna developed and manufactured by Antennentechnik Bad Blankenburg for retrofitting vehicles. ATTB specialises in radio-based networking solutions for various industries and applications. With its own research, development and production, ATTB has stood for the highest quality and reliability "Made in Germany" since 1919.

We drive connectivity: networking without compromise

The ATTB Kombiflex roof antenna 2118.04 establishes reliable, high-performance radio connections in the field of broadcasting and is suitable for mobile outdoor use. It undergoes the most stringent testing processes, is manufactured in Germany from high-quality components and offers first-class transmission or reception performance - even under the most difficult conditions.

Frequency bands and communication services

The ATTB 2118.04 multifunction antenna covers several frequency bands and thus communication services. In the broadcasting range, AM (0.15 - 1.71 MHz), FM (87.5 - 108 MHz) and DAB+ (DAB+ BIII, 174 - 230 MHz; DAB+ L-Band, 1452 - 1492 MHz) can be received.

Special features and characteristics

- Active and low-noise DAB reception in band III
- Passive DAB reception in the L-band range
- Active broadcast reception for LMK/UKW
- Active antenna with separate signal routing
- 12V power supply for the amplifier either via DIN plug-in sleeve or via inner conductor of the cable connections (only one connection recommended)
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort (only one mounting hole for 2 functions)
- Cable type: RG 174
- Services: AM/FM, DAB+
- Connectors: FAKRA(m) G, FAKRA(m) B

Dimensions:
- Width: 56 mm
- Height: 270 mm
- Length: 45 mm
- Weight: 0.241 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2118_04

ATTB_2118_04
129,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, VHF/DAB+ 23cm; 10m cable, FAKRA/DIN/SMB connectors
Antenna set A10, VHF/DAB+ 23cm; 10m cable, FAKRA/DIN/SMB connectors
The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 10 m, Fakra female - SMB female , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T0L1000UNI



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10T0L1000UNI

A10T0L1000UNI
130,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, FM/DAB+ 41cm; 7.5m cable, FAKRA/DIN/SMB connectors
Antenna set A10, FM/DAB+ 41cm; 7.5m cable, FAKRA/DIN/SMB connectors
According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height is not important, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 7.5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7.5 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T0L750UNI



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10LT0L750UNI

A10LT0L750UNI
130,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna - FM/DAB+/GPS GLONASS
Combi-flex antenna - FM/DAB+/GPS GLONASS
Roof antenna with the following functions and features:
- DAB+ reception, active and low-noise in the ranges B III, L-band passive.
- Radio reception, active and low-noise for AM/FM
- 12 V power supply for the amplifiers either via inner conductor of the cable connections (only one connection recommended) or DIN plug-in sleeve
- Active GNSS antenna (phantom power)
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort, only one mounting hole for 3 functions
- Interchangeable with conventional flex antennas
- Cable type: RG 174
- Services: GLONASS, AM/FM, GPS, DAB+
- Connectors: FAKRA(m) G, FAKRA(m) B, FAKRA(m) C

Especially suitable for:
- Analogue and digital broadcasting
- Navigation systems
- Fleet management

Additional information:
- Mounting: Roof mounting
- Additional information: Kombiflex roof antenna
- Category/Special feature: active antenna with separate signal routing, GPS diagnostic function (only with 3761_06)

Dimensions:
- Width: 65 mm
- Height: 270 mm
- Length: 104 mm
- Weight: 0.153 kg

Suitable replacement antenna: ATTB_4626_11

Suitable extension cable:

8482: Fakra socket to SMB socket
8483: Fakra socket to DIN plug
8489: Fakra socket to Raku 2 socket
8481: Fakra socket to Fakra socket plus adapter for GPS, e.g. 8641
(Fakra plug to GT 16 socket for Pioneer) or 8610 (Fakra plug to devices with GT5, such as Kenwood, Clarion or Alpine)

Original article number: 3761.06

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3761_06

ATTB_3761_06
135,01 EUR
incl. 19% tax excl. Shipping costs
Antennenset A1, UKW/DAB; 7,5m Kabel, FAKRA/DIN/SMB Anschlüsse
Antennenset A1, UKW/DAB; 7,5m Kabel, FAKRA/DIN/SMB Anschlüsse
According to our tests, the A1 antenna is currently the best antenna for optimum radio reception in motor homes.The electronics , the antenna radiator and the antenna supports are perfectly matched to each other. You will be excited Scope of delivery:

Antenna A1
Lowloss cable 7.5 m, Fakra socket - Fakra socket, for FM
Adapter 1: Fakra plug - DIN plug
Lowloss cable 7.5 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with short rod, length about 23 cm
- DAB reception, active and low noise in the BAND 3
- FM/FM/AM reception, active and low noise
- 12 volt power supply optionally via inner conductor of the cable connections (phantom power) or via DIN plug sleeve (see picture)
- low installation depth (approx. 15 mm)
- Gain: FM: 14dB
- Gain: DAB+: 10dB
- Gain: AM: 6dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 145 mm, Fakra plug, white
- Cable: RG 174, DAB+ 185 mm, Fakra plug, gray

Low-loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our Lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminum foil between the PE dielectric and the shield.Only high quality Fakra plugs and sockets from Rosenberger are used.They have excellent workmanship and fit due to a special punching-bending technology of the company Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Erweiterte POLYTHEN Isolation 2.00 mm
Aluminum foil shield and additional Tinned copper braid
Outer diameter: 3.6 mm


Note: This set replaces the previous sets:

A1T0L750DIN
A1T0L750DYN

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A1T0L750UNI

A1T0L750UNI
139,00 EUR
incl. 19% tax excl. Shipping costs
16V antenna active - FM/DAB+ with 7.5 m cable set
16V antenna active - FM/DAB+ with 7.5 m cable set
Roof antenna with the following functions and features:
- DAB reception, active and low-noise in band III, L-band passive.
- Radio reception, active and low-noise for LMK/UKW
- 12 V power supply for the amplifier optionally via inner conductor of the cable connections or DIN plug-in sleeve
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort only one mounting hole for 2 functions
- Cable type: RG 174
- Services: AM/FM, DAB+
- Connectors: FAKRA(m) G, FAKRA(m) B

Spare rod: 4626.11

Additional information:
- Mounting: Roof mounting
- Additional info: Kombiflex roof antenna
- Category/Special feature: Active antenna with separate signal routing

Dimensions:
- Width: 56 mm
- Height: 270 mm
- Length: 45 mm
- Weight: 0.12 kg
LowLoss cable set no. 2, consisting of 2 LowLoss antenna cables with Fakra colour coding for ATTB antennas with FM and DAB+.

Contents:
- 7.5 metre lowloss cable Fakra socket - DIN plug, Fakra B, beige
- 7.5 metre low loss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey

Low loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent workmanship and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Length: 7.5 metres
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Original article number of the antenna: 2118.01

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2118_72

ATTB_2118_72
139,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna active - FM/DAB+/GPS GLONASS - only 2 cables
Combi-flex antenna active - FM/DAB+/GPS GLONASS - only 2 cables
Roof antenna with the following functions and features:
- DAB+ reception, active and low-noise in the ranges B III, L-band passive.
- Radio reception, active and low-noise for LMK/UKW
- 12 V power supply for the amplifiers either via inner conductor of the cable connections (only one connection recommended) or DIN plug-in sleeve
- Active GNSS antenna (phantom power)
- Low-noise antenna rod
- Low installation depth (15 mm)
- Can be used with 4724_XX (crossover, passive)
- Cable type: RG 174
- Services: AM/FM, GNSS, GPS, DAB+
- Connectors: FAKRA(m) B, FAKRA(m) C

Especially suitable for:
- Analogue and digital radio
- navigation systems

Spare radiator: 4626.11

Additional information:
- Mounting: Roof mounting
- Additional info: Kombiflex roof antenna
- Category/special feature: active single-cable solution for FM and DAB+, 23 cm short rod

Dimensions:
- Width: 55 mm
- Height: 270 mm
- Length: 103 mm
- Weight: 0.166 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3731_01

ATTB_3731_01
139,99 EUR
incl. 19% tax excl. Shipping costs
Dachantenne (TETRA, GPS/GLONASS)
Dachantenne (TETRA, GPS/GLONASS)
Kurzinfo:

- Dachantenne für den Einsatz im Mobilfunk im BOS-TETRA-Band
- Aktive GNSS-Antenne (Phantom Stromversorgung)
- geringe Einbautiefe, geringer Montageaufwand - nur eine Montagebohrung für 2 Funktionen
- Kabeltyp: RG 174
- Dienste: GLONASS, GNSS, GPS, TETRA
- Konnektoren: FME(f), FME(m)

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3801_01

ATTB_3801_01
146,99 EUR
incl. 19% tax excl. Shipping costs
Antennenset A1, UKW/DAB; 10m Kabel, FAKRA/DIN/SMB Anschlüsse
Antennenset A1, UKW/DAB; 10m Kabel, FAKRA/DIN/SMB Anschlüsse
The antenna A1 is according to our tests, the best antenna at the moment for optimal radio reception in camper van. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled!

Delivery contents:

Antenna A1
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 10 m, Fakra female - SMB female , for DAB+

Roof antenna with the following features:
- 16V antenna with short rod, length about 23 cm.
- DAB reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- low installation depth (approx. 15 mm)
- gain: FM: 14dB
- Gain: DAB+: 10dB
- gain: AM: 6dB
- power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 145 mm, Fakra plug, white
- Cable: RG 174, DAB+ 185 mm, Fakra plug, grey

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductivity values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T0L1000DIN
A1T0L1000DYN

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A1T0L1000UNI

A1T0L1000UNI
149,00 EUR
incl. 19% tax excl. Shipping costs
16V antenna active - FM/DAB+ with 10 m cable set
16V antenna active - FM/DAB+ with 10 m cable set
FM: White plug - DAB+ Grey plug

Roof antenna with the following features:
- 16 V antenna with short rod, length approx. 23 cm.
- DAB reception, active and low-noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- Low installation depth (approx. 15 mm)
- Gain: FM: 14dB
- Gain: DAB+: 10dB
- Gain: AM: 6dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 145 mm, Fakra plug, white
- Cable: RG 174, DAB+ 185 mm, Fakra plug, grey

LowLoss cable set, consisting of 2 LowLoss antenna cables with Fakra colour coding for ATTB antennas with FM and DAB+.

Contents:
- 10 metre lowloss cable fakra socket - DIN plug, fakra B, beige
- 10 metre low loss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey

Low loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent workmanship and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Length: 10 metres
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Original part number of the antenna: 2118.01

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2118_92

ATTB_2118_92
149,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna active - FM/DAB+/GPS/GSM with fakra connections
Combi-flex antenna active - FM/DAB+/GPS/GSM with fakra connections
Highest quality and reliability "Made in Germany".

The ATTB 3766.01 roof antenna is an antenna developed and manufactured by Antennentechnik Bad Blankenburg for retrofitting vehicles. ATTB specialises in radio-based networking solutions for various industries and applications. With its own research, development and production, ATTB has stood for the highest quality and reliability "Made in Germany" since 1919.

We drive connectivity: networking without compromise

The ATTB Kombiflex roof antenna 3766.01 establishes reliable, high-performance radio connections in the fields of broadcasting, mobile radio and navigation and is suitable for mobile outdoor use. It undergoes the most stringent testing processes, is manufactured in Germany from high-quality components and offers first-class transmission or reception performance - even under the most difficult conditions.

Frequency bands and communication services

The ATTB 3766.01 multifunction antenna covers several frequency bands and thus communication services. These include AM, FM, DAB+, GSM (2G), UMTS (3G), and GNSS(GPS).

- In the broadcasting range, AM (0.15 -16 MHz), FM (87.5 - 108 MHz) and DAB+ (174 - 237 MHz) can be received.
- In the mobile radio range, the services 2G/GSM (890 - 960 MHz), 3G/UMTS (1710 - 1880 MHz, 1900 - 2170 MHz) are available.
- The ATTB 3766.01 roof antenna is also designed to receive GPS navigation signals (1575.42 MHz).

Special features and characteristics
- Active and low-noise radio reception (AM, FM)
- Active and low-noise DAB reception in the B III ranges
- Mobile radio reception in the GSM (900/1800) and UMTS frequency ranges
- Active GNSS antenna (phantom power supply)
- Active antenna with separate signal routing
- 12V power supply for the amplifier either via inner conductor of the cable connections (only one connection recommended) or DIN plug-in sleeve
- Low-noise and short antenna rod
- Low installation depth (15 mm)
- Low installation effort (only one mounting hole for 4 functions)
- Cable type: RG 174
- Services: UMTS, AM/FM, 2G, GSM, GNSS, GPS, DAB+, 3G
- Connectors: FAKRA(m) D, FAKRA(m) G, FAKRA(m) B, FAKRA(m)

Additional information and notes
- Spare rod: 4626_11

Dimensions:
- Width: 55 mm
- Height: 270 mm
- Length: 103 mm
- Weight: 0.176 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3766_01

ATTB_3766_01
149,00 EUR
incl. 19% tax excl. Shipping costs
Combiflex antenna, Tetra/GPS/FM
Combiflex antenna, Tetra/GPS/FM
- Roof antenna for use in public authorities and security radio
- Low-noise antenna rod
- Active GPS antenna (power supply of the amplifier only via inner conductor of the GPS connector)
- Cable type: RG 174
- Services: AM/FM, TETRA, GPS
- Connectors: FME(f), FAKRA(m) A, FME(m)

Dimensions:
- Width: 55 mm
- Height: 484 mm
- Length: 103 mm
- Weight: 0.188 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3707_02

ATTB_3707_02
149,99 EUR
incl. 19% tax excl. Shipping costs
Combiflex antenna, Tetra 3dB, GPS
Combiflex antenna, Tetra 3dB, GPS
Roof antenna with the following functions and features:
- Mobile radio in the TETRA band (380-410 MHz)
- Active GPS antenna (phantom power supply)
- Low installation depth (15 mm)
- Low installation effort only one mounting hole for 2 functions
- Cable type: RG 174
- Services: TETRA, GPS
- Connectors: FME(f), FME(m)

Additional information:
- Mounting: Roof mounting
- Additional info: Rod 600 mm
- Category/Special feature: TETRA 3 dB* gain, diagnostic function with GPS

Dimensions:
- Width: 55 mm
- Height: 640 mm
- Length: 103 mm
- Weight: 0.192 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3712_01

ATTB_3712_01
149,99 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, FM/DAB+ 41cm; 10m cable, FAKRA/DIN/SMB connectors
Antenna set A10, FM/DAB+ 41cm; 10m cable, FAKRA/DIN/SMB connectors
According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height is not important, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 10 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T0L1000UNI



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10LT0L1000UNI

A10LT0L1000UNI
152,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, VHF/DAB+ 23cm; 7,5m cable, FAKRA/DIN/SMB connectors
Antenna set A10, VHF/DAB+ 23cm; 7,5m cable, FAKRA/DIN/SMB connectors
The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 3, stainless steel 400*400*1 mm, white powder coated RAL 9003
central hole d= 20 mm
Lowloss cable 7,5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7,5 m, Fakra female - SMB female, for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23 cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T3L750UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10T3L750UNI

A10T3L750UNI
157,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna active - FM/DAB+ or DVB-T2/GPS -facra connection
Combi-flex antenna active - FM/DAB+ or DVB-T2/GPS -facra connection
Roof antenna with the following functions and features:
- DAB+ and DVB-T2 reception, active and low-noise in the B III, B IV/V ranges.
- Radio reception, active and low-noise for LMK/UKW
- Power supply for amplifier either as phantom power or via DIN plug-in sleeve
- Active GPS antenna (phantom power)
- Low-noise antenna rod
- Low installation effort - only one mounting hole
- Cable type: RG 174
- Services: AM/FM, GPS, DVB-T, DAB+
- Connectors: FAKRA(m) B, FAKRA(m) C

Accessories:
- Crossover 4738_01 for simultaneous use of DAB+ and DVB-T2
- Spare radiator: 4652_11

Additional information:
- Mounting: Roof mounting
- Additional info: Kombiflex roof antenna
- Category/special feature: active antenna for AM/FM, DAB+/DVB-T2 and GPS
- The digital output of the antenna can be used by plugging on the enclosed FAKRA housings as follows:
1. FAKRA G only DAB reception
2. FAKRA E for DVB-T reception only
3. FAKRA H for simultaneous reception of DAB and DVB-T with the crossover 4738_01.

Dimensions:
- Width: 55 mm
- Height: 270 mm
- Length: 103 mm
- Weight: 0.172 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3793_01

ATTB_3793_01
159,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, FM/DAB+ 41cm; 5m cable, FAKRA/DIN/SMB connectors
Antenna set A10, FM/DAB+ 41cm; 5m cable, FAKRA/DIN/SMB connectors
According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where height is not an issue, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 3, stainless steel 400*400*1 mm, white powder coated RAL 9003
Central hole d= 20 mm
Lowloss cable 7.5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7,5 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41 cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T3L750UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10LT3L500UNI

A10LT3L500UNI
159,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna - FM/DAB+/GPS/Glonass/ - Fakra - 41 cm Strahler
Combi-flex antenna - FM/DAB+/GPS/Glonass/ - Fakra - 41 cm Strahler
Neue Kombiflex-Schrägdachantenne 30°: Optimale Konnektivität für moderne Kastenwagenfahrzeuge

Kurzinfo:

- DAB+ Empfang, aktiv und rauscharm in den Bereichen B III, L-Band passiv • DAB+ Empfang, aktiv und rauscharm in den Bereichen B III, L-Band passiv • 12 V-Stromversorgung der Verstärker wahlweise über Innenleiter der Kabelanschlüsse oder DIN-Steckhülse • aktive GNSS-Antenne (Phantomspeisung)
- geräuscharmer Antennenstab (43 cm)
- geringe Einbautiefe (15 mm)
- Dienste: AM/FM, DAB, DAB+, GNSS, GPS
- Konnektoren: FAKRA

Wir freuen uns, unsere neueste Produktinnovation vorzustellen: Die Schrägdach-Antenne FM/DAB+/GNSS. Diese hochmoderne Antenne wurde speziell für Fahrzeuge mit 30° Schrägdächern entwickelt und bietet eine optimale Lösung für Modelle wie den MERCEDES-Benz Sprinter, VW Crafter, FIAT Ducato, CITROEN Jumper, PEUGEOT Boxer u.a..

Produktmerkmale:

- Unterstützung für AM, FM, DAB+ und GNSS in einem kompakten Design
- Verbesserte Empfangsqualität für verschiedene Kommunikationsdienste
- Elegante Integration in die Fahrzeugsilhouette
- Aktiver, rauscharmer DAB+ Empfang in den Bereichen Band III und L-Band
- Integrierte aktive GNSS-Antenne für präzise Navigationsdienste
- Flexibles Stromversorgungskonzept: 12V über Innenleiter oder DIN-Steckhülse
- Geringe Einbautiefe von nur 15 mm für einfache Installation
- Geräuscharmer Antennenstab (43 cm) mit optionalem 53 cm Ersatzstrahler

Unsere neue Kombiflex-Schrägdachantenne 30° vereint modernste Technologie mit praktischer Funktionalität. Sie gewährleistet nicht nur einen hervorragenden Empfang für AM/FM-Radio und digitales DAB+, sondern bietet auch präzise GNSS-Unterstützung für zuverlässige Navigationsdienste.

Mit dieser innovativen Antennenlösung setzen wir neue Maßstäbe in der Fahrzeugkommunikation und unterstreichen unser Engagement für fortschrittliche, kundenorientierte Produktentwicklung. Entdecken Sie die Zukunft der mobilen Konnektivität mit unserer Schrägdach-Antenne FM/DAB+/GNSS - die perfekte Wahl für moderne Fahrzeuge und anspruchsvolle Anwendungen.

Zudem arbeiten wir bereits an weiteren Kombinationsmöglichkeiten, um noch mehr Flexibilität für verschiedene Einsatzzwecke zu bieten.



*************************************************************************************************
Angaben zur Produktsicherheit:
Marke: ATTB
Hersteller: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2201_02

ATTB_2201_02
159,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna - FM/DAB+/GPS/Glonass/ LTE/5G - Fakra - 23 cm
Combi-flex antenna - FM/DAB+/GPS/Glonass/ LTE/5G - Fakra - 23 cm
Highest Quality and Reliability “Made in Germany”
The ATTB 3799.02 roof antenna is a retrofit antenna developed and manufactured by Antennentechnik Bad Blankenburg. ATTB specializes in wireless networking solutions for various industries and applications. With its own research, development, and production, ATTB has stood for the highest quality and reliability “Made in Germany” since 1919.

We drive connectivity: Networking without compromise
The ATTB 3799.02 Kombiflex roof antenna establishes reliable, high-performance wireless connections in the areas of broadcasting, mobile communications, and navigation, and is suitable for mobile outdoor use. It undergoes the strictest testing processes, is manufactured in Germany using high-quality components, and offers first-class transmission and reception performance – even under the most challenging conditions.

Frequency bands and communication services
The ATTB 3799.02 multi-function antenna covers multiple frequency bands and thus supports a wide range of communication services. These include AM, FM, DAB, GSM, UMTS, LTE, 5G, and GNSS.
• In the broadcast range, AM (0.1–16 MHz), FM (87.5–108 MHz), and DAB (174–237 MHz) can be received.
• In the mobile communications range, this antenna can be used for receiving 5G (698–960 MHz and 1450–3800 MHz).
• The ATTB 3799.02 roof antenna is also designed for receiving GNSS navigation signals (1575.42 MHz; 1602–1610 MHz).

Special Features and Characteristics
• Active and low-noise broadcast reception (AM, FM)
• Active and low-noise DAB reception in the Band III and L-Band bands
• Mobile communications reception in the GSM, UMTS, and LTE frequency bands
• Active GNSS Antenna (Phantom Power Supply)
• Diagnostics possible using a 10 kO resistor at all connections
• Low-noise antenna rod
• Shallow installation depth (15 mm)
• Easy installation (only one mounting hole for 4 functions)

Additional Information and Notes
• The ATTB 3799.02 roof antenna is also available as a set for installation in GRP motorhomes (3799.30)
• A replacement rod is available for the ATTB 3799.02 roof antenna (4626.11; for USA/Canada 4660.11)
• If the AM/FM radio does not provide phantom power, an external power supply using a voltage adapter is necessary
• Optionally, rod 4660.11 can be used to receive the WX weather band. This means that DAB reception is no longer possible.

Dimensions:
- Width: 55 mm
- Height: 301 mm
- Length: 103 mm
- Weight: 0.197 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3799_02

ATTB_3799_02
164,99 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna, 2m/70cm, GSM900/1800, UMTS, GPS 2 dBi
Combi-flex antenna, 2m/70cm, GSM900/1800, UMTS, GPS 2 dBi
- Mobile radio in the 2m/ 70cm band
- Mobile radio in the GSM/ UMTS band
- Active GPS antenna (phantom power)
- low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort
- Only one mounting hole for 3 functions
- Rod adjustable by shortening
- Services: UMTS, 70cm, 2G, GSM, GPS, 2m, 3G
- Connectors: FAKRA(m) I, FAKRA(m) D, FAKRA(m) C

Spare rod 4667.11

Additional information:
- Mounting: Roof mounting
- Additional info: Spotlight 480 mm, can be shortened
- Category/special feature: 10 MHz bandwidth in the 2m band or 20 MHz bandwidth in the 70cm band, diagnostic function for GPS and GSM

Dimensions:
- Width: 55 mm
- Height: 520 mm
- Length: 103 mm
- Weight: 0.184 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3748_01

ATTB_3748_01
174,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, FM/DAB+ 41cm; 7.5m cable, FAKRA/DIN/SMB connectors
Antenna set A10, FM/DAB+ 41cm; 7.5m cable, FAKRA/DIN/SMB connectors
According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where height is not an issue, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 3, stainless steel 400*400*1 mm, white powder coated RAL 9003
Central hole d= 20 mm
Lowloss cable 7.5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7,5 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41 cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T3L750UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10LT3L750UNI

A10LT3L750UNI
179,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, VHF/DAB+ 23cm; 10m cable, FAKRA/DIN/SMB connectors
Antenna set A10, VHF/DAB+ 23cm; 10m cable, FAKRA/DIN/SMB connectors
The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 3, stainless steel 400*400*1 mm, white powder coated RAL 9003
central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 10 m, Fakra female - SMB female , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T3L1000UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10T3L1000UNI

A10T3L1000UNI
179,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A1 white, FM/DAB+; 7.5m cable, FAKRA/DIN/SMB connections
Antenna set A1 white, FM/DAB+; 7.5m cable, FAKRA/DIN/SMB connections
According to our tests, the A1 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled!

Delivery contents:

Antenna A1
Antenna support 3, stainless steel 400*400*1 mm, white powder-coated RAL 9003
Central hole d= 20 mm
Lowloss cable 7.5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7.5 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with short rod, length approx. 23 cm
- DAB reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- Low installation depth (approx. 15 mm)
- Gain: FM: 14dB
- Gain: DAB+: 10dB
- Gain: AM: 6dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 145 mm, Fakra plug, white
- Cable: RG 174, DAB+ 185 mm, Fakra plug, grey

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:
A1T3L750DIN
A1T3L750DYN

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A1T3L750UNI-W

A1T3L750UNI-W
189,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, FM/DAB+ 41cm; 10m cable, FAKRA/DIN/SMB connectors
Antenna set A10, FM/DAB+ 41cm; 10m cable, FAKRA/DIN/SMB connectors
According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where height is not an issue, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 3, stainless steel 400*400*1 mm, white powder coated RAL 9003
Central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 10 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41 cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T3L1000UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10LT3L1000UNI

A10LT3L1000UNI
199,00 EUR
incl. 19% tax excl. Shipping costs
16V antenna active 76 degree tilt angle - FM/DAB+ with fakra connections
16V antenna active 76 degree tilt angle - FM/DAB+ with fakra connections
Roof antenna with the following functions and features:
- DAB reception, active and low-noise in band III, L-band passive.
- Radio reception, active and low-noise for LMK/UKW
- 12 V power supply for the amplifier optionally via inner conductor of the cable connections or DIN plug-in sleeve
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort only one mounting hole for 2 functions
- Cable type: RG 174
- Services: AM/FM, DAB+
- Connectors: FAKRA(m) G, FAKRA(m) B

Spare rod: 4626_11

Additional information:
- Mounting: Roof mounting
- Additional info: Kombiflex roof antenna
- Category/special feature: Active antenna with separate signal routing

Dimensions:
- Width: 56 mm
- Height: 270 mm
- Length: 45 mm
- Weight: 0.12 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2124_01

ATTB_2124_01
199,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna - FM/DAB+/GPS GLONASS with 5 m cable set
Combi-flex antenna - FM/DAB+/GPS GLONASS with 5 m cable set
Roof antenna with the following functions and features:
- DAB+ reception, active and low-noise in the ranges B III, L-band passive.
- Radio reception, active and low-noise for AM/FM
- 12 V power supply for the amplifiers either via inner conductor of the cable connections (only one connection recommended) or DIN plug-in sleeve
- Active GNSS antenna (phantom power)
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort, only one mounting hole for 3 functions
- Interchangeable with conventional flex antennas
- Cable type: RG 174
- Services: GLONASS, AM/FM, GPS, DAB+
- Connectors: FAKRA(m) G, FAKRA(m) B, FAKRA(m) C

Especially suitable for:
- Analogue and digital broadcasting
- Navigation systems
- Fleet management

Additional information:
- Mounting: Roof mounting
- Additional information: Kombiflex roof antenna
- Category/Special feature: active antenna with separate signal routing, GPS diagnostic function (only with 3761_06)

Dimensions:
- Width: 65 mm
- Height: 270 mm
- Length: 104 mm
- Weight: 0.153 kg

Suitable replacement antenna: ATTB_4626_11

The antenna is delivered with the following cable set:

LowLoss cable set no. 3, consisting of LowLoss antenna cable with Fakra colour coding for ATTB antennas with FM and DAB+ and RG174 cable for GPS content:
- 5 metre lowloss cable fakra socket - DIN plug, fakra B, beige
- 5 metre lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey
- 5 metre RG174 cable fakra socket - fakra socket, fakra C, blue
- Adapter Fakra male - GT5 female for GPS connection of e.g. Alpine, Kenwood and Clarion devices.

Low loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Original article number of the antenna: 3761.06

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3761_06_53

ATTB_3761_06_53
209,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A1 white, FM/DAB+; 10m cable, FAKRA/DIN/SMB connections
Antenna set A1 white, FM/DAB+; 10m cable, FAKRA/DIN/SMB connections
According to our tests, the A1 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled!

Delivery contents:

Antenna A1
Antenna support 3, stainless steel 400*400*1 mm, white powder-coated RAL 9003
Central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug
Lowloss cable 10 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with short rod, length approx. 23 cm
- DAB reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- Low installation depth (approx. 15 mm)
- Gain: FM: 14dB
- Gain: DAB+: 10dB
- Gain: AM: 6dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 145 mm, Fakra plug, white
- Cable: RG 174, DAB+ 185 mm, Fakra plug, grey

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:
A1T3L1000DIN
A1T3L1000DYN

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A1T3L1000UNI-W

A1T3L1000UNI-W
209,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna, 2m/70cm, SRD868,GSM 900/1800, UMTS, GPS
Combi-flex antenna, 2m/70cm, SRD868,GSM 900/1800, UMTS, GPS
- Mobile radio in the 2m/ 70cm band
- Mobile radio in the GSM/ UMTS band
- Radio in the SRD 868 range
- Active GPS antenna (phantom power)
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort
- Only one mounting hole for 4 functions
- Rod adjustable by shortening
- Also suitable for large hole patterns (Mercedes Benz - optionally available, VW / Audi - included in delivery)
- Cable type: RG 174
- Services: UMTS, 70cm, SRD868, 868MHz, 2G, GSM, GPS, 2m, 3G
- Connectors: FAKRA(m) I, FAKRA(m) D, FAKRA(m) E, FAKRA(m) C

Additional information:
- Mounting: Roof mounting
- Additional info: Spotlight 480 mm, can be shortened
- Category/special feature: 10 MHz bandwidth in 2m band or 20 MHz bandwidth in 70cm band, SRD 868 MHz, diagnostic function for GPS and GSM, for VW/Audi, Mercedes Benz

Dimensions:
- Width: 65 mm
- Height: 520 mm
- Length: 104 mm
- Weight: 0.242 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3751_01

ATTB_3751_01
216,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna - FM/DAB+/GPS GLONASS with 7.5 m cable set
Combi-flex antenna - FM/DAB+/GPS GLONASS with 7.5 m cable set
Roof antenna with the following functions and features:
- DAB+ reception, active and low-noise in the ranges B III, L-band passive.
- Radio reception, active and low-noise for AM/FM
- 12 V power supply for the amplifiers either via inner conductor of the cable connections (only one connection recommended) or DIN plug-in sleeve
- Active GNSS antenna (phantom power)
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort, only one mounting hole for 3 functions
- Interchangeable with conventional flex antennas
- Cable type: RG 174
- Services: GLONASS, AM/FM, GPS, DAB+
- Connectors: FAKRA(m) G, FAKRA(m) B, FAKRA(m) C

Especially suitable for:
- Analogue and digital broadcasting
- Navigation systems
- Fleet management

Additional information:
- Mounting: Roof mounting
- Additional information: Kombiflex roof antenna
- Category/Special feature: active antenna with separate signal routing, GPS diagnostic function (only with 3761_06)

Dimensions:
- Width: 65 mm
- Height: 270 mm
- Length: 104 mm
- Weight: 0.153 kg

Suitable replacement antenna: ATTB_4626_11

The antenna is delivered with the following cable set:

LowLoss cable set no. 4, consisting of LowLoss antenna cable with Fakra colour coding for ATTB antennas with FM and DAB+ and RG174 cable for GPS content:
- 7.5 metre lowloss cable fakra socket - DIN plug, fakra B, beige
- 7.5 metre lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey
- 7.5 metre RG174 cable fakra socket - fakra socket, fakra C, blue
- Adapter Fakra male - GT5 female for GPS connection of e.g. Alpine, Kenwood and Clarion devices.

Low loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Original article number of the antenna: 3761.06

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3761_06_73

ATTB_3761_06_73
219,00 EUR
incl. 19% tax excl. Shipping costs
Antenna support for 2 motorhome antennas 570*360*1.5 mm, white
Antenna support for 2 motorhome antennas 570*360*1.5 mm, white
Aluminum plate powder-coated white (RAL9003) for mounting antennas on motorhomes or special vehicles without a metal roof. The plate forms the counter pole necessary for lamda/quarter radiators so that 16 V antennas or Kombiflex antennas function optimally. The plate already has a 20 mm and a 22 mm hole in the centre for mounting all common antennas.
The second hole is for the second antenna, which is especially needed for 5G/LTE/WLAN routers, such as Campernet or Teltronika or other routers with Mimo technology.

The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery includes two stainless steel brackets, which are already pre-drilled for 3 screws each.

Furthermore, two junction boxes 15934 are already glued to the underside of the antenna support. This protects the antenna's cable connections from moisture.

For the bonding work we recommend the optional DEKALIN bonding set DN-SetMS5.

For cable entry we recommend a combination of the optional junction box 15934 with the roof bushings 15921/15922 or 15923. Please note the Youtube video linked to the articles 15921/15922 and 15923 and here:
https://www.youtube.com/watch?v=_07czJ_uubs

The stainless steel plate is delivered without antennas. We will be happy to advise you on all questions regarding antenna technology!

Scope of delivery:
- Antenna support stainless steel 570*360*1,5 mm with two holes 20/22 mm, height 70 mm, white powder coated (RAL9003)
- 2 stainless steel brackets 360*50*35 mm, powder-coated white (RAL9003)
- 6 stainless steel screws with nuts, M5
- 20 stainless steel screws cross recess for junction box
- Junction box 15934 pre-drilled, d=35 mm
- Junction box 15934 pre-drilled, d=35 mm

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: 15905w

15905w
229,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna active - FM/DAB+/DVB-T2 - 5 m cable set
Combi-flex antenna active - FM/DAB+/DVB-T2 - 5 m cable set
Roof antenna with the following functions and features:
- DAB+ and DVB-T2 reception, active and low-noise in the B III, B IV/V ranges.
- Radio reception, active and low-noise for LMK/UKW
- Power supply for amplifier either as phantom power or via DIN plug-in sleeve
- Low-noise antenna rod
- Low installation effort - only one mounting hole
- Cable type: RG 174
- Services: AM/FM, DVB-T, DAB+
- Connectors: FAKRA(m) H, FAKRA(m) B

Accessories:
- Crossover 4738_01 for simultaneous use of DAB+ and DVB-T2
- Spare radiator: 4652_11

Additional information:
- Mounting: Roof mounting
- Additional info: Kombiflex roof antenna
- Category/special feature: active antenna for AM/FM, DAB+/DVB-T2 and GPS
- The digital output of the antenna can be used by plugging on the enclosed FAKRA housings as follows:
1. FAKRA G only DAB reception
2, FAKRA E for DVB-T reception only
3, FAKRA H for simultaneous reception of DAB and DVB-T with the crossover 4738_01.

Dimensions:
- Width: 55 mm
- Height: 270 mm
- Length: 103 mm
- Weight: 0.154 kg

Set contents:

- Antenna ATTB_3792_01

- Passive splitter for simultaneous DAB+ and DVB-T2
- Adapter Fakra connector to coax connector (for TV)
- RG 174 Cable Fakra socket- Fakra socket, 3 m (for TV)
- LowLoss cable set no. 1, consisting of LowLoss antenna cable with Fakra color coding for ATTB antennas with FM and DAB+
Content:
- 5 meter lowloss cable Fakra socket - DIN plug, Fakra B, beige
- 5 meter lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey

Low-loss cables (...little loss cables) are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has best conductance values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bending technology from Rosenberger(Fakra-SF).

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3792_55

ATTB_3792_55
239,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna - FM/DAB+/GPS/Glonass/ - Fakra - 43 cm Rod, 3,5m cable kit
Combi-flex antenna - FM/DAB+/GPS/Glonass/ - Fakra - 43 cm Rod, 3,5m cable kit
Neue Kombiflex-Schrägdachantenne 30°: Optimale Konnektivität für moderne Kastenwagenfahrzeuge

Kurzinfo:

- DAB+ Empfang, aktiv und rauscharm in den Bereichen B III, L-Band passiv • DAB+ Empfang, aktiv und rauscharm in den Bereichen B III, L-Band passiv • 12 V-Stromversorgung der Verstärker wahlweise über Innenleiter der Kabelanschlüsse oder DIN-Steckhülse • aktive GNSS-Antenne (Phantomspeisung)
- geräuscharmer Antennenstab (43 cm)
- geringe Einbautiefe (15 mm)
- Dienste: AM/FM, DAB, DAB+, GNSS, GPS
- Konnektoren: FAKRA

Wir freuen uns, unsere neueste Produktinnovation vorzustellen: Die Schrägdach-Antenne FM/DAB+/GNSS. Diese hochmoderne Antenne wurde speziell für Fahrzeuge mit 30° Schrägdächern entwickelt und bietet eine optimale Lösung für Modelle wie den MERCEDES-Benz Sprinter, VW Crafter, FIAT Ducato, CITROEN Jumper, PEUGEOT Boxer u.a..

Produktmerkmale:

- Unterstützung für AM, FM, DAB+ und GNSS in einem kompakten Design
- Verbesserte Empfangsqualität für verschiedene Kommunikationsdienste
- Elegante Integration in die Fahrzeugsilhouette
- Aktiver, rauscharmer DAB+ Empfang in den Bereichen Band III und L-Band
- Integrierte aktive GNSS-Antenne für präzise Navigationsdienste
- Flexibles Stromversorgungskonzept: 12V über Innenleiter oder DIN-Steckhülse
- Geringe Einbautiefe von nur 15 mm für einfache Installation
- Geräuscharmer Antennenstab (43 cm) mit optionalem 53 cm Ersatzstrahler

Unsere neue Kombiflex-Schrägdachantenne 30° vereint modernste Technologie mit praktischer Funktionalität. Sie gewährleistet nicht nur einen hervorragenden Empfang für AM/FM-Radio und digitales DAB+, sondern bietet auch präzise GNSS-Unterstützung für zuverlässige Navigationsdienste.

Mit dieser innovativen Antennenlösung setzen wir neue Maßstäbe in der Fahrzeugkommunikation und unterstreichen unser Engagement für fortschrittliche, kundenorientierte Produktentwicklung. Entdecken Sie die Zukunft der mobilen Konnektivität mit unserer Schrägdach-Antenne FM/DAB+/GNSS - die perfekte Wahl für moderne Fahrzeuge und anspruchsvolle Anwendungen.

Zudem arbeiten wir bereits an weiteren Kombinationsmöglichkeiten, um noch mehr Flexibilität für verschiedene Einsatzzwecke zu bieten.



*************************************************************************************************
Angaben zur Produktsicherheit:
Marke: ATTB
Hersteller: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2201_02_35

ATTB_2201_02_35
239,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2, FM/DAB+/GPS; 41cm, 7,5m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2, FM/DAB+/GPS; 41cm, 7,5m cable, DIN/ISO/FAKRA/SMB connectors
According to our tests, the A2 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.

Delivery contents:

Antenna A2
Lowloss cable 7.5 m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 7.5 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 7.5 m, Fakra socket - Fakra socket (C coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive).
- VHF/FM/AM reception, active and low noise
- active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN plug-in sleeve (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, grey
- Cable: RG 174, GPS 150 mm, fakra plug, blue

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:
A2T0L750DIN
A2T0L750DYN

Optionally available: articulated joint ATTB_4615_01.

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A2LT0L750UNI

A2LT0L750UNI
240,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2, FM/DAB+/GPS; 23cm, 7,5m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2, FM/DAB+/GPS; 23cm, 7,5m cable, DIN/ISO/FAKRA/SMB connectors
According to our tests, the A2 antenna is currently the best antenna for optimal radio reception in the motorhome. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the European GPS system in advance.

Scope of delivery:

Antenna A2
Lowlosskabel 7.5 m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for FM (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for FM (B-coding, white)
Lowloss cable 7.5 m, Fakra socket - SMB socket , for DAB+ (G-coding, gray)

GPS cable 7.5 m, Fakra socket - Fakra socket (C-coding, blue)
Adapter 3: Fakra plug - GT5 socket (f. eg Alpine,Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in the BAND 3 and L (passive)
- VHF/FM/AM reception, active and low noise
- active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- small installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra connector, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, gray
- Cable: RG 174, GPS 150 mm, Fakra plug, blue

Low loss cables are the cables with the best electrical properties for the lossless transmission of antenna signals. Our lowloss cable series has best conductivity values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of the company Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braid.
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:
A2T0L750DIN
A2T0L750DYN

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A2T0L750UNI

A2T0L750UNI
249,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, VHF/DAB+ 23cm; 7,5m cable, FAKRA/DIN/SMB connectors
Antenna set A10, VHF/DAB+ 23cm; 7,5m cable, FAKRA/DIN/SMB connectors
The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 4, stainless steel 360*360*1,5 mm, painted white central hole d= 20 mm
Lowloss cable 7,5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7,5 m, Fakra female - SMB female, for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T4L750UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10T4L750UNI

A10T4L750UNI
257,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna active - FM/DAB+/DVB-T2 - 7.5 m cable set
Combi-flex antenna active - FM/DAB+/DVB-T2 - 7.5 m cable set
Roof antenna with the following functions and features:
- DAB+ and DVB-T2 reception, active and low-noise in the B III, B IV/V ranges.
- Radio reception, active and low-noise for LMK/UKW
- Power supply for amplifier either as phantom power or via DIN plug-in sleeve
- Low-noise antenna rod
- Low installation effort - only one mounting hole
- Cable type: RG 174
- Services: AM/FM, DVB-T, DAB+
- Connectors: FAKRA(m) H, FAKRA(m) B

Accessories:
- Crossover 4738_01 for simultaneous use of DAB+ and DVB-T2
- Spare radiator: 4652_11

Additional information:
- Mounting: Roof mounting
- Additional info: Kombiflex roof antenna
- Category/special feature: active antenna for AM/FM, DAB+/DVB-T2 and GPS
- The digital output of the antenna can be used by plugging on the enclosed FAKRA housings as follows:
1. FAKRA G only DAB reception
2, FAKRA E for DVB-T reception only
3, FAKRA H for simultaneous reception of DAB and DVB-T with the crossover 4738_01.

Dimensions:
- Width: 55 mm
- Height: 270 mm
- Length: 103 mm
- Weight: 0.154 kg

Set contents:

- Antenna ATTB_3792_01

- Passive splitter for simultaneous DAB+ and DVB-T2
- Adapter Fakra connector to coax connector (for TV)
- RG 174 Cable Fakra socket- Fakra socket, 3 m (for TV)
- LowLoss cable set no. 2, consisting of LowLoss antenna cable with Fakra color coding for ATTB antennas with FM and DAB+
Content:
- 7,5 meter lowloss cable Fakra socket - DIN plug, Fakra B, beige
- 7,5 meter lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey

Low-loss cables (...little loss cables) are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has best conductance values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bending technology from Rosenberger(Fakra-SF).

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3792_75

ATTB_3792_75
259,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2, FM/DAB+/GPS; 23cm, 10m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2, FM/DAB+/GPS; 23cm, 10m cable, DIN/ISO/FAKRA/SMB connectors
According to our tests, the A2 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.

Delivery contents:

Antenna A2
Lowloss cable 10 m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 10 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 10 m, Fakra socket - Fakra socket (C-coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive)
- VHF/FM/AM reception, active and low-noise
- Active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, grey
- Cable: RG 174, GPS 150 mm, Fakra plug, blue

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding.
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:
A2T0L1000DIN
A2T0L1000DYN

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A2T0L1000UNI

A2T0L1000UNI
269,00 EUR
incl. 19% tax excl. Shipping costs
Antennenset A1, UKW/DAB; 7,5m Kabel, FAKRA/DIN/SMB Anschlüsse
Antennenset A1, UKW/DAB; 7,5m Kabel, FAKRA/DIN/SMB Anschlüsse


*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A1T4L750UNI

A1T4L750UNI
279,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2 white, FM/DAB+/GPS; 23cm;7,5m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2 white, FM/DAB+/GPS; 23cm;7,5m cable, DIN/ISO/FAKRA/SMB connectors
According to our tests, the A2 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.

Delivery contents:

Antenna A2
Antenna support 3, stainless steel 400*400*1 mm, white powder-coated (RAL9003)
Central hole d= 20 mm
Lowloss cable 7,5m, Fakra socket - Fakra socket (B-coding, white)

Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 7.5 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)
GPS cable 7.5 m, Fakra socket - Fakra socket (C coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive).
- VHF/FM/AM reception, active and low noise
- active GPS antenna
- 12 volt power supply either via inner conductor of cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, fakra plug, grey
- Cable: RG 174, GPS 150 mm, fakra plug, blue

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A2T3L750DIN
A2T3L750DYN

Art.Nr: A2T3L750UNI-W

A2T3L750UNI-W
279,00 EUR
incl. 19% tax excl. Shipping costs
A1H antenna set, FM/DAB+; 6.5 m cable, DIN/SMB
A1H antenna set, FM/DAB+; 6.5 m cable, DIN/SMB
As already explained in detail, very good reception is only possible if the antenna is mounted on a conductive metal surface. You can glue these roof bonnets directly onto the roof if there is a possibility to lead the cables into the interior of the vehicle under the roof bonnet.

First, the antenna is screwed to the roof bonnet, then a roof grommet is drilled and the 30 cm long cables of the antenna are led into the vehicle interior.

For bonding and sealing the plastic roof bonnet we recommend the bonding set (DN-SetMS5). This item is not included in the delivery and must be ordered separately.

In the basic version with 6.5 m cable, the cables are provided with DIN/SMB connections. For the longer versions, our UNI cable sets with several adapters are used for almost 99% of all radios. Please note that in case of service, the bonding of the roof cover must be loosened in order to replace the antenna!

About the product:

Groundplane for GRP roof superstructures. The plastic roof cover with internal metal plate provides the necessary counterpole for the optimum function of car radio antennas on GRP roofs. The roof bonnet is glued. For the bonding work, we recommend the optional DEKALIN bonding set DN-SetMS5.

Delivery contents:

1 plastic roof bonnet with internal metal plate
1 antenna for FM/UKW
1 Drill hole adapter
1 dust protection seal
1 connection cable 6.5 m with DIN plug
1 connection cable 6.5 m with SMB socket

Roof antenna with the following features:

- 16 V antenna with short rod, length approx. 23 cm
- DAB reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low noise
- 12 V power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- Low installation depth (approx. 15 mm)
- Gain: FM: 14dB
- Gain: DAB+: 10dB
- Gain: AM: 6dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 145 mm, Fakra plug, white, FM
- Cable: RG 174, DAB+ 185 mm, Fakra plug, grey, DAB+

LowLoss cable set, consisting of 2 LowLoss antenna cables with Fakra colour coding for ATTB antennas with FM and DAB+.

Contents:
- 6.5 metre lowloss cable fakra socket - DIN plug, fakra B, beige
- 6.5 metre low loss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey

Low loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent workmanship and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Length: 6.5 metres
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Dimensions: 38.5 * 38.5 * 3.5 cm

Original article number of the antenna: 2118.30

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2118_30

ATTB_2118_30
279,00 EUR
incl. 19% tax excl. Shipping costs
A1H antenna set, VHF/DAB+; 7.5 m cable, FAKRA/DIN/ISO/SMB
A1H antenna set, VHF/DAB+; 7.5 m cable, FAKRA/DIN/ISO/SMB
Now available

As already explained in detail, very good reception is only possible if the antenna is mounted on a conductive metal surface. You can glue these roof bonnets directly onto the roof if there is a possibility to lead the cables into the interior of the vehicle under the roof bonnet.

First, the antenna is screwed to the roof bonnet, then a roof grommet is drilled and the 30 cm long cables of the antenna are led into the vehicle interior.

For bonding and sealing the plastic roof bonnet we recommend the bonding set (DN-SetMS5). This item is not included in the delivery and must be ordered separately.

Please note that in case of service, the bonding of the roof bonnet must be loosened in order to replace the antenna!

About the product:

Groundplane for GRP roof superstructures. The plastic roof cover with internal metal plate provides the necessary counterpole for the optimal function of car radio antennas on GRP roofs.
The roof bonnet is glued. For the bonding work, we recommend the optional DEKALIN bonding set DN-SetMS5.

Delivery contents:

1 plastic roof bonnet with internal metal plate
1 antenna for FM/UKW
1 Drill hole adapter
1 dust protection seal
LowLoss cable set, consisting of 2 LowLoss antenna cables with Fakra colour coding for ATTB antennas with FM and DAB+

Contents:
- 7.5 metre lowloss cable fakra socket - fakra socket, beige
- 7.5 metre lowloss cable fakra socket - SMB socket 90 degrees, fakra G, grey

Adapter for VHF:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

Roof antenna with the following features:

- 16 V antenna with short rod, length approx. 23 cm
- DAB reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- Low installation depth (approx. 15 mm)
- Gain: FM: 14dB
- Gain: DAB+: 10dB
- Gain: AM: 6dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 145 mm, Fakra plug, white, FM
- Cable: RG 174, DAB+ 185 mm, Fakra plug, grey, DAB+

Note on our low-loss cables:

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and thus the lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Length: 7.5 metres
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Dimensions: 38.5 * 38.5 * 3.5 cm

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2118_31

ATTB_2118_31
279,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, FM/DAB+ 41cm; 7.5m cable, FAKRA/DIN/SMB connectors
Antenna set A10, FM/DAB+ 41cm; 7.5m cable, FAKRA/DIN/SMB connectors
According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where height is not an issue, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 4, stainless steel 360*360*1.5 mm, painted white
Central hole d= 20 mm
Lowloss cable 7.5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7,5 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41 cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G
Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T4L750UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10LT4L750UNI

A10LT4L750UNI
279,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, VHF/DAB+ 23cm; 10m cable, FAKRA/DIN/SMB connectors
Antenna set A10, VHF/DAB+ 23cm; 10m cable, FAKRA/DIN/SMB connectors
The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 4, stainless steel 360*360*1,5 mm, painted white central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 10m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T4L1000UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10T4L1000UNI

A10T4L1000UNI
279,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna - FM/DAB+/DVB-T2/GPS -5 m cable set
Combi-flex antenna - FM/DAB+/DVB-T2/GPS -5 m cable set
Roof antenna with the following functions and features:
- DAB+ and DVB-T2 reception, active and low-noise in the B III, B IV/V ranges.
- Radio reception, active and low-noise for LMK/UKW
- Power supply for amplifier either as phantom power or via DIN plug-in sleeve
- Active GPS antenna (phantom power)
- Low-noise antenna rod
- Low installation effort - only one mounting hole
- Cable type: RG 174
- Services: AM/FM, GPS, DVB-T, DAB+
- Connectors: FAKRA(m) B, FAKRA(m) C

Accessories:
- Crossover 4738_01 for simultaneous use of DAB+ and DVB-T2
- Spare radiator: 4652_11

Additional information:
- Mounting: Roof mounting
- Additional info: Kombiflex roof antenna
- Category/special feature: active antenna for AM/FM, DAB+/DVB-T2 and GPS
- The digital output of the antenna can be used by plugging on the enclosed FAKRA housings as follows:
1. FAKRA G only DAB reception
2. FAKRA E for DVB-T reception only
3. FAKRA H for simultaneous reception of DAB and DVB-T with the crossover 4738_01.

Dimensions:
- Width: 55 mm
- Height: 270 mm
- Length: 103 mm
- Weight: 0.172 kg

Set contents:

- Antenna ATTB_3793_01

- Passive splitter for simultaneous DAB+ and DVB-T2
- Adapter Fakra connector to coax connector (for TV)
- RG 174 Cable Fakra socket- Fakra socket, 3 m (for TV)
- LowLoss cable set no. 3, consisting of LowLoss antenna cable with Fakra color coding for ATTB antennas with FM and DAB+ and RG174 cable for GPS
Content:
- 5 meter lowloss cable Fakra socket - DIN plug, Fakra B, beige
- 5 meter lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey
- 5 meter RG174 cable Fakra socket - Fakra socket, Fakra C, blue
- Adapter Fakra plug - GT5 socket for GPS connection of e.g. Alpine, Kenwood and Clarion devices.

Low-loss cables (...little loss cables) are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has best conductance values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bending technology from Rosenberger(Fakra-SF).

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3793_56

ATTB_3793_56
289,00 EUR
incl. 19% tax excl. Shipping costs
Antennenset A1, UKW/DAB; 10m Kabel, FAKRA/DIN/SMB Anschlüsse
Antennenset A1, UKW/DAB; 10m Kabel, FAKRA/DIN/SMB Anschlüsse


*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A1T4L1000UNI

A1T4L1000UNI
289,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2 white, FM/DAB+/GPS; 23cm, 10m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2 white, FM/DAB+/GPS; 23cm, 10m cable, DIN/ISO/FAKRA/SMB connectors
According to our tests, the A2 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.

Delivery contents:

Antenna A2
Antenna support 3, stainless steel 400*400*1 mm, white powder-coated (RAL9003)
Central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)
Lowloss cable 10 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)
GPS cable 10 m, Fakra socket - Fakra socket (C coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive).
- VHF/FM/AM reception, active and low noise
- active GPS antenna
- 12 volt power supply either via inner conductor of cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, fakra plug, grey
- Cable: RG 174, GPS 150 mm, fakra plug, blue

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A2T3L1000DIN
A2T3L1000DYN

Art.Nr: A2T3L1000UNI-W

A2T3L1000UNI-W
295,00 EUR
incl. 19% tax excl. Shipping costs
Combi-flex antenna - FM/DAB+/DVB-T2/GPS -7.5 m cable set
Combi-flex antenna - FM/DAB+/DVB-T2/GPS -7.5 m cable set
Roof antenna with the following functions and features:
- DAB+ and DVB-T2 reception, active and low-noise in the B III, B IV/V ranges.
- Radio reception, active and low-noise for LMK/UKW
- Power supply for amplifier either as phantom power or via DIN plug-in sleeve
- Active GPS antenna (phantom power)
- Low-noise antenna rod
- Low installation effort - only one mounting hole
- Cable type: RG 174
- Services: AM/FM, GPS, DVB-T, DAB+
- Connectors: FAKRA(m) B, FAKRA(m) C

Accessories:
- Crossover 4738_01 for simultaneous use of DAB+ and DVB-T2
- Spare radiator: 4652_11

Additional information:
- Mounting: Roof mounting
- Additional info: Kombiflex roof antenna
- Category/special feature: active antenna for AM/FM, DAB+/DVB-T2 and GPS
- The digital output of the antenna can be used by plugging on the enclosed FAKRA housings as follows:
1. FAKRA G only DAB reception
2. FAKRA E for DVB-T reception only
3. FAKRA H for simultaneous reception of DAB and DVB-T with the crossover 4738_01.

Dimensions:
- Width: 55 mm
- Height: 270 mm
- Length: 103 mm
- Weight: 0.172 kg

Set contents:

- Antenna ATTB_3793_01

- Passive splitter for simultaneous DAB+ and DVB-T2
- Adapter Fakra plug to coax plug, 2 m (for TV)
- RG 174 Cable Fakra socket- Fakra socket, 3 m (for TV)
- LowLoss cable set no. 4, consisting of LowLoss antenna cable with Fakra color coding for ATTB antennas with FM and DAB+ and RG174 cable for GPS
Content:
- 7,5 meter lowloss cable Fakra socket - DIN plug, Fakra B, beige
- 7,5 meter lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey
- 7,5 meter RG174 cable Fakra socket - Fakra socket, Fakra C, blue
- Adapter Fakra plug - GT5 socket for GPS connection of e.g. Alpine, Kenwood and Clarion devices.

Low-loss cables (...little loss cables) are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has best conductance values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bending technology from Rosenberger(Fakra-SF).

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3793_76

ATTB_3793_76
299,00 EUR
incl. 19% tax excl. Shipping costs
A1H antenna set, FM/DAB+; 10m cable, FAKRA/DIN/ISO/SMB
A1H antenna set, FM/DAB+; 10m cable, FAKRA/DIN/ISO/SMB
Now available

As already explained in detail, very good reception is only possible if the antenna is mounted on a conductive metal surface. You can glue these roof bonnets directly onto the roof if there is a possibility to lead the cables into the interior of the vehicle under the roof bonnet.

First, the antenna is screwed to the roof bonnet, then a roof grommet is drilled and the 30 cm long cables of the antenna are led into the interior of the vehicle.

For bonding and sealing the plastic roof bonnet we recommend the bonding set (DN-SetMS5). This item is not included in the delivery and must be ordered separately.

Please note that in case of service, the bonding of the roof bonnet must be loosened in order to replace the antenna!

About the product:

Groundplane for GRP roof superstructures. The plastic roof cover with internal metal plate provides the necessary counterpole for the optimum function of car radio antennas on GRP roofs. The roof bonnet is glued. For the bonding work, we recommend the optional DEKALIN bonding set DN-SetMS5.

Delivery contents:

1 plastic roof bonnet with internal metal plate
1 antenna for FM/UKW
1 Drill hole adapter
1 dust protection seal
LowLoss cable set, consisting of 2 LowLoss antenna cables with Fakra colour coding for ATTB antennas with FM and DAB+

Contents:
- 10 metre lowloss cable fakra socket - fakra socket, beige
- 10 metre lowloss cable fakra socket - SMB socket 90 degrees, fakra G, grey

Adapter for VHF:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

Roof antenna with the following features:

- 16 V antenna with short rod, length approx. 23 cm
- DAB reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- Low installation depth (approx. 15 mm)
- Gain: FM: 14dB
- Gain: DAB+: 10dB
- Gain: AM: 6dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 145 mm, Fakra plug, white, FM
- Cable: RG 174, DAB+ 185 mm, Fakra plug, grey, DAB+

Note on our low-loss cables:

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and thus the lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Length: 10 metres
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Dimensions: 38.5 * 38.5 * 3.5 cm

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2118_32

ATTB_2118_32
299,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A10, FM/DAB+ 41cm; 10m cable, FAKRA/DIN/SMB connectors
Antenna set A10, FM/DAB+ 41cm; 10m cable, FAKRA/DIN/SMB connectors
According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where height is not an issue, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 4, stainless steel 360*360*1.5 mm, painted white
Central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 10m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41 cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T4L1000UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: A10LT4L1000UNI

A10LT4L1000UNI
299,00 EUR
incl. 19% tax excl. Shipping costs
12V antenna active 70 degrees for FM/DAB+ in 16V design
12V antenna active 70 degrees for FM/DAB+ in 16V design
Excellent roof antenna with the following features:
-flat angle of only 70 degrees, also ideal for front mounting if roof is not exactly horizontal.
- Antenna with short rod, length approx. 23 cm, in 16 V design.
- DAB+ reception 174-237 MHz & 1452-1492 MHz
- VHF/FM reception 87-108 MHz
- 12 V external power supply (no phantom powering possible)
- Low installation depth approx. 16 mm
- Gain: FM: 7 dB
- Gain: DAB+: 12dB
- Power supply: 12 volts, 100 mA
- Temperature range (-40 degrees to + 85 degrees Celsius)
- Impedance: 50 Ohm (DAB+); 75-150 Ohm (FM)
- Cable to antenna:
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey , code G

Note: This antenna is delivered without cable!

Recommended LOWLOSS extension cable:

9552: 5 metre lowloss cable for VHF/FM (with Fakra socket and DIN plug) and 5 metre lowloss cable for DAB+ (with Fakra socket and SMB socket.
9572: 7.5 metre lowloss cable for VHF/FM (with Fakra socket and DIN plug) and 7.5 metre lowloss cable for DAB+ (with Fakra socket and SMB socket).

or UNI LOWLOSS sets with different connectors for FM. With this cable set, 99% of the car radios on the market can be connected with our antennas. The sets consist of 2 LowLoss antenna cables with Fakra colour coding for VHF and DAB+.

- Lowloss cable Fakra socket - Fakra socket, beige
- Lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey
Adapter for VHF:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

Variants:
UNI-2L500: Set with 5 m cable length
UNI-2L750: Set with 7,5 m cable length
UNI-2L1000: Set with 10,0 m cable length

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punching and bending technology by Rosenberger (Fakra-SF).

Technical data of the low loss cable:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional
tinned copper braiding
Outer diameter: 3.6 mm

This antenna is also available with high quality LowLoss antenna extensions, (radio side DIN plug for FM and SMB socket for DAB+):

DZ_2113_52 with 2 extension cables 5.0 m (DIN plug/SMB socket).
DZ_2113_72 with 2 extension cables 7.5 m (DIN plug/SMB socket)
DZ_2113_L500 with 2 extension cables 5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L750 with 2 extension cables 7.5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L1000 with 2 extension cables 10 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: DZ_2113_01_05

DZ_2113_01_05
299,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2, FM/DAB+/GPS; 41cm, 10m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2, FM/DAB+/GPS; 41cm, 10m cable, DIN/ISO/FAKRA/SMB connectors
According to our tests, the A2 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.

Delivery contents:

Antenna A2
Lowloss cable 10 m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 10 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 10 m, Fakra socket - Fakra socket (C coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive).
- VHF/FM/AM reception, active and low-noise
- active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN plug-in sleeve (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, grey
- Cable: RG 174, GPS 150 mm, fakra plug, blue

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional
tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:
A2T0L1000DIN
A2T0L1000DYN

Optionally available: articulated joint ATTB_4615_01.

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A2LT0L1000UNI

A2LT0L1000UNI
299,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2 white, FM/DAB+/GPS; 23cm;7,5m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2 white, FM/DAB+/GPS; 23cm;7,5m cable, DIN/ISO/FAKRA/SMB connectors
According to our tests, the A2 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.

Delivery contents:

Antenna A2
Antenna support 3, stainless steel 400*400*1 mm, white powder-coated (RAL9003)
Central hole d= 20 mm
Lowloss cable 7,5m, Fakra socket - Fakra socket (B-coding, white)

Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 7.5 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)
GPS cable 7.5 m, Fakra socket - Fakra socket (C coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive).
- VHF/FM/AM reception, active and low noise
- active GPS antenna
- 12 volt power supply either via inner conductor of cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, fakra plug, grey
- Cable: RG 174, GPS 150 mm, fakra plug, blue

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A2T3L750DIN
A2T3L750DYN

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A2T3L750UNI

A2T3L750UNI
299,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2 white, FM/DAB+/GPS; 23cm, 10m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2 white, FM/DAB+/GPS; 23cm, 10m cable, DIN/ISO/FAKRA/SMB connectors
According to our tests, the A2 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.

Delivery contents:

Antenna A2
Antenna support 3, stainless steel 400*400*1 mm, white powder-coated (RAL9003)
Central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)
Lowloss cable 10 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)
GPS cable 10 m, Fakra socket - Fakra socket (C coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive).
- VHF/FM/AM reception, active and low noise
- active GPS antenna
- 12 volt power supply either via inner conductor of cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, fakra plug, grey
- Cable: RG 174, GPS 150 mm, fakra plug, blue

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A2T3L1000DIN
A2T3L1000DYN

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A2T3L1000UNI

A2T3L1000UNI
309,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2 white, FM/DAB+/GPS; 41cm; 5m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2 white, FM/DAB+/GPS; 41cm; 5m cable, DIN/ISO/FAKRA/SMB connectors
According to our tests, the A2 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.

Delivery contents:

Antenna A2
Antenna support 3, stainless steel 400*400*1 mm, white powder coated (RAL9003)
Central hole d= 20 mm
Lowloss cable 5m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 5 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 5 m, Fakra socket - Fakra socket (C coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive).
- VHF/FM/AM reception, active and low noise
- active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN plug-in sleeve (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, grey
- Cable: RG 174, GPS 150 mm, fakra plug, blue

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Optionally available: articulated joint ATTB_4615_01.

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A2LT3L500UNI

A2LT3L500UNI
319,00 EUR
incl. 19% tax excl. Shipping costs
A1H antenna set, FM/DAB+; 6.5 m cable, DIN/SMB, langer Strahler
A1H antenna set, FM/DAB+; 6.5 m cable, DIN/SMB, langer Strahler
As already explained in detail, very good reception is only possible if the antenna is mounted on a conductive metal surface. You can glue these roof bonnets directly onto the roof if there is a possibility to lead the cables into the interior of the vehicle under the roof bonnet.

First, the antenna is screwed to the roof bonnet, then a roof grommet is drilled and the 30 cm long cables of the antenna are led into the vehicle interior.

For bonding and sealing the plastic roof bonnet we recommend the bonding set (DN-SetMS5). This item is not included in the delivery and must be ordered separately.

In the basic version with 6.5 m cable, the cables are provided with DIN/SMB connections. For the longer versions, our UNI cable sets with several adapters are used for almost 99% of all radios. Please note that in case of service, the bonding of the roof cover must be loosened in order to replace the antenna!

About the product:

Groundplane for GRP roof superstructures. The plastic roof cover with internal metal plate provides the necessary counterpole for the optimum function of car radio antennas on GRP roofs. The roof bonnet is glued. For the bonding work, we recommend the optional DEKALIN bonding set DN-SetMS5.

Delivery contents:

1 plastic roof bonnet with internal metal plate
1 antenna for FM/UKW
1 Drill hole adapter
1 dust protection seal
1 connection cable 6.5 m with DIN plug
1 connection cable 6.5 m with SMB socket

Roof antenna with the following features:

- 16 V antenna with short rod, length approx. 43 cm
- DAB reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low noise
- 12 V power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- Low installation depth (approx. 15 mm)
- Gain: FM: 14dB
- Gain: DAB+: 10dB
- Gain: AM: 6dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 145 mm, Fakra plug, white, FM
- Cable: RG 174, DAB+ 185 mm, Fakra plug, grey, DAB+

LowLoss cable set, consisting of 2 LowLoss antenna cables with Fakra colour coding for ATTB antennas with FM and DAB+.

Contents:
- 6.5 metre lowloss cable fakra socket - DIN plug, fakra B, beige
- 6.5 metre low loss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey

Low loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent workmanship and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Length: 6.5 metres
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Dimensions: 38.5 * 38.5 * 3.5 cm

Original article number of the antenna: 2118.30

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2118L_30

ATTB_2118L_30
329,00 EUR
incl. 19% tax excl. Shipping costs
A1H antenna set, VHF/DAB+; 7.5 m cable, FAKRA/DIN/ISO/SMB
A1H antenna set, VHF/DAB+; 7.5 m cable, FAKRA/DIN/ISO/SMB
Now available

As already explained in detail, very good reception is only possible if the antenna is mounted on a conductive metal surface. You can glue these roof bonnets directly onto the roof if there is a possibility to lead the cables into the interior of the vehicle under the roof bonnet.

First, the antenna is screwed to the roof bonnet, then a roof grommet is drilled and the 30 cm long cables of the antenna are led into the vehicle interior.

For bonding and sealing the plastic roof bonnet we recommend the bonding set (DN-SetMS5). This item is not included in the delivery and must be ordered separately.

Please note that in case of service, the bonding of the roof bonnet must be loosened in order to replace the antenna!

About the product:

Groundplane for GRP roof superstructures. The plastic roof cover with internal metal plate provides the necessary counterpole for the optimal function of car radio antennas on GRP roofs.
The roof bonnet is glued. For the bonding work, we recommend the optional DEKALIN bonding set DN-SetMS5.

Delivery contents:

1 plastic roof bonnet with internal metal plate
1 antenna for FM/UKW
1 Drill hole adapter
1 dust protection seal
LowLoss cable set, consisting of 2 LowLoss antenna cables with Fakra colour coding for ATTB antennas with FM and DAB+

Contents:
- 7.5 metre lowloss cable fakra socket - fakra socket, beige
- 7.5 metre lowloss cable fakra socket - SMB socket 90 degrees, fakra G, grey

Adapter for VHF:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

Roof antenna with the following features:

- 16 V antenna with longer rod, 43 cm
- DAB reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- Low installation depth (approx. 15 mm)
- Gain: FM: 14dB
- Gain: DAB+: 10dB
- Gain: AM: 6dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 145 mm, Fakra plug, white, FM
- Cable: RG 174, DAB+ 185 mm, Fakra plug, grey, DAB+

Note on our low-loss cables:

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and thus the lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Length: 7.5 metres
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Dimensions: 38.5 * 38.5 * 3.5 cm

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2118L_31

ATTB_2118L_31
329,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2 white, FM/DAB+/GPS; 41cm;7,5m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2 white, FM/DAB+/GPS; 41cm;7,5m cable, DIN/ISO/FAKRA/SMB connectors
According to our tests, the A2 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.

Delivery contents:

Antenna A2
Antenna support 3, stainless steel 400*400*1 mm, white powder coated (RAL9003)
Central hole d= 20 mm
Lowloss cable 7,5m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 7.5 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 7.5 m, Fakra socket - Fakra socket (C coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive).
- VHF/FM/AM reception, active and low noise
- active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN plug-in sleeve (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, grey
- Cable: RG 174, GPS 150 mm, fakra plug, blue

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:
A2T3L750DIN
A2T3L750DYN

Optionally available: articulated joint ATTB_4615_01.

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A2LT3L750UNI

A2LT3L750UNI
339,00 EUR
incl. 19% tax excl. Shipping costs
A1H antenna set, FM/DAB+; 10m cable, FAKRA/DIN/ISO/SMB
A1H antenna set, FM/DAB+; 10m cable, FAKRA/DIN/ISO/SMB
Now available

As already explained in detail, very good reception is only possible if the antenna is mounted on a conductive metal surface. You can glue these roof bonnets directly onto the roof if there is a possibility to lead the cables into the interior of the vehicle under the roof bonnet.

First, the antenna is screwed to the roof bonnet, then a roof grommet is drilled and the 30 cm long cables of the antenna are led into the interior of the vehicle.

For bonding and sealing the plastic roof bonnet we recommend the bonding set (DN-SetMS5). This item is not included in the delivery and must be ordered separately.

Please note that in case of service, the bonding of the roof bonnet must be loosened in order to replace the antenna!

About the product:

Groundplane for GRP roof superstructures. The plastic roof cover with internal metal plate provides the necessary counterpole for the optimum function of car radio antennas on GRP roofs. The roof bonnet is glued. For the bonding work, we recommend the optional DEKALIN bonding set DN-SetMS5.

Delivery contents:

1 plastic roof bonnet with internal metal plate
1 antenna for FM/UKW
1 Drill hole adapter
1 dust protection seal
LowLoss cable set, consisting of 2 LowLoss antenna cables with Fakra colour coding for ATTB antennas with FM and DAB+

Contents:
- 10 metre lowloss cable fakra socket - fakra socket, beige
- 10 metre lowloss cable fakra socket - SMB socket 90 degrees, fakra G, grey

Adapter for VHF:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

Roof antenna with the following features:

- 16 V antenna with longer rod approx. 43 cm
- DAB reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- Low installation depth (approx. 15 mm)
- Gain: FM: 14dB
- Gain: DAB+: 10dB
- Gain: AM: 6dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 145 mm, Fakra plug, white, FM
- Cable: RG 174, DAB+ 185 mm, Fakra plug, grey, DAB+

Note on our low-loss cables:

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and thus the lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Length: 10 metres
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Dimensions: 38.5 * 38.5 * 3.5 cm

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2118L_32

ATTB_2118L_32
349,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2 white, FM/DAB+/GPS; 41cm, 10m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2 white, FM/DAB+/GPS; 41cm, 10m cable, DIN/ISO/FAKRA/SMB connectors
According to our tests, the A2 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.

Delivery contents:

Antenna A2
Antenna support 3, stainless steel 400*400*1 mm, white powder-coated (RAL9003)
Central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 10 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 10 m, Fakra socket - Fakra socket (C coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive).
- VHF/FM/AM reception, active and low-noise
- active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN plug-in sleeve (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, grey
- Cable: RG 174, GPS 150 mm, fakra plug, blue

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:
A2T3L1000DIN
A2T3L1000DYN

Optionally available: articulated joint ATTB_4615_01.

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A2LT3L1000UNI

A2LT3L1000UNI
359,00 EUR
incl. 19% tax excl. Shipping costs
Antennenset A2H, UKW/DAB+/GPS; 5m Kabel, 3x Fakra
Antennenset A2H, UKW/DAB+/GPS; 5m Kabel, 3x Fakra


*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3761_25

ATTB_3761_25
369,00 EUR
incl. 19% tax excl. Shipping costs
16V antenna active 76 degree tilt angle - FM/DAB+ with fakra connections
16V antenna active 76 degree tilt angle - FM/DAB+ with fakra connections
Roof antenna with the following functions and features:
- DAB reception, active and low-noise in band III, L-band passive.
- Radio reception, active and low-noise for LMK/UKW
- 12 V power supply for the amplifier optionally via inner conductor of the cable connections or DIN plug-in sleeve
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort only one mounting hole for 2 functions
- Cable type: RG 174
- Services: AM/FM, DAB+
- Connectors: FAKRA(m) G, FAKRA(m) B

Spare rod: 4626_11

Additional information:
- Mounting: Roof mounting
- Additional info: Kombiflex roof antenna
- Category/special feature: Active antenna with separate signal routing

Dimensions:
- Width: 56 mm
- Height: 270 mm
- Length: 45 mm
- Weight: 0.12 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_2124_30

ATTB_2124_30
369,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2H, FM/DAB+/GPS; DIN/ISO/SMB/FAKRA/GT5/GT16, 7.5 m
Antenna set A2H, FM/DAB+/GPS; DIN/ISO/SMB/FAKRA/GT5/GT16, 7.5 m
Now available

As already explained in detail, very good reception is only possible if the antenna is mounted on a conductive metal surface. You can glue these roof bonnets directly onto the roof if there is a possibility to lead the cables into the interior of the vehicle under the roof bonnet.

First, the antenna is screwed to the roof bonnet, then a roof grommet is drilled and the antenna's 30 cm long cables are fed through to the inside of the vehicle.

For bonding and sealing the plastic roof bonnet we recommend the bonding set (DN-SetMS5). This item is not included in the delivery and must be ordered separately.

Please note that in case of service, the bonding of the roof bonnet must be loosened in order to replace the antenna!

About the product:

Groundplane for GRP roof superstructures. The plastic roof cover with internal metal plate provides the necessary counterpole for the optimum function of car radio antennas on GRP roofs. The roof bonnet is glued and can also be screwed. For the bonding work, we recommend the optional DEKALIN bonding set DN-SetMS5.

Delivery contents:

1 plastic roof bonnet with internal metal plate
1 antenna for FM/UKW/GPS/GLONASS
1 Drill hole adapter
1 dust protection seal
1 connection cable 7.5 m for FM
1 connection cable 7.5 m for DAB+
1 connection cable 7.5 m for GPS

Roof antenna with the following features:
- DAB reception, active and low noise in BAND 3 and L (passive)
- VHF/FM/AM reception, active and low-noise
- active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN plug-in sleeve (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, grey
- Cable: RG 174, GPS 150 mm, fakra plug, blue

LowLoss cable set, consisting of 2 LowLoss antenna cables with Fakra colour coding for ATTB antennas with FM and DAB+.
Contents:
- 7.5 metre lowloss cable fakra socket - fakra socket, beige
- 7.5 metre lowloss cable fakra socket - SMB socket 90 degrees, fakra G, grey

Adapter for FM:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

GPS set:

- 7.5 metre RG174 cable fakra socket - fakra socket, fakra C, blue
- Adapter RG174 fakra plug - GT5 socket for the GPS connection of e.g. Alpine, Kenwood and Clarion devices.
- Adapter RG174 Fakra plug - GT16 socket for the GPS connection of e.g. Pioneer devices.

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Dimensions: 38.5 * 38.5 * 3.5 cm

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3761_31

ATTB_3761_31
379,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A3,FM/DAB+/GPS/DVB-T2; 41cm, 5m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A3,FM/DAB+/GPS/DVB-T2; 41cm, 5m cable, DIN/ISO/FAKRA/SMB connectors
The antenna A3 is according to our tests, the best antenna at the moment for optimal radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS.
Highlight is the possibility also digital terrestrial television (DVB-T2) to receive. The scope of delivery includes a splitter, which provides DAB + and DVBT2 from one output of the antenna.

Delivery contents:

Antenna A3
Lowloss cable 5 m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for FM (B-coding, white)

Lowloss cable 5 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 5 m, Fakra socket - Fakra socket (C-coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine,Kenwood, Clarion), (C coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Passive splitter for DAB+/DVB-T2
Fakra socket - Fakra socket, 3 m + Fakra plug to coax plug (IEC m) 2 m for DVB-T2

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive)
- VHF/FM/AM reception, active and low noise
- Active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 15 dB - (87.5-108 MHz)
- Gain: AM: 5dB - (0.15-16 MHz)
- Gain: DAB+: 15 dB - (174-230 MHz)
- Gain: DVB-T2+: 12/10 dB - (474-602/610-786 MHz)
- Gain: GPS: 28 dB -(1575.42 MHz)
- Power supply: AM/FM 9-16 volts, 35mA at 12 volts.
- Power supply: DAB+ 5-12 volts, 25mA
- Power supply: GPS+ 3-5.5 volts, 15-40mA

- Cable: RG 174, AM/FM 185 mm, Fakra plug, white
- Cable: RG 174, DAB+ 250 mm, Fakra plug, grey (DAB)or green (DVB-T) or violet (DAB/DVB-T)
- Cable: RG 174, GPS 175 mm, Fakra plug, blue

Low loss cables are the cables with the best electrical properties for the lossless transmission of antenna signals. Our lowloss cable series has best conductivity values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding.
Outer diameter: 3.6 mm

Optionally available: articulated joint ATTB_4615_01.

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A3LT0L500UNI

A3LT0L500UNI
379,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A3,FM/DAB+/GPS/DVB-T2; 41cm, 7,5m cable, DIN/ISO/FAKRA/SMB connectio
Antenna set A3,FM/DAB+/GPS/DVB-T2; 41cm, 7,5m cable, DIN/ISO/FAKRA/SMB connectio
The antenna A3 is according to our tests, the best antenna at the moment for optimal radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS.
Highlight is the possibility also digital terrestrial television (DVB-T2) to receive. The scope of delivery includes a splitter, which provides DAB + and DVBT2 from one output of the antenna.

Delivery contents:

Antenna A3
Lowloss cable 7.5 m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 7.5 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 5 m, Fakra socket - Fakra socket (C-coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine,Kenwood, Clarion), (C coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Passive splitter for DAB+/DVB-T2
Fakra socket - Fakra socket, 3 m + Fakra plug to coax plug (IEC m) 2 m for DVB-T2

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive)
- VHF/FM/AM reception, active and low-noise
- Active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 15 dB - (87.5-108 MHz)
- Gain: AM: 5dB - (0.15-16 MHz)
- Gain: DAB+: 15 dB - (174-230 MHz)
- Gain: DVB-T2+: 12/10 dB - (474-602/610-786 MHz)
- Gain: GPS: 28 dB -(1575.42 MHz)
- Power supply: AM/FM 9-16 volts, 35mA at 12 volts.
- Power supply: DAB+ 5-12 volts, 25mA
- Power supply: GPS+ 3-5.5 volts, 15-40mA

- Cable: RG 174, AM/FM 185 mm, Fakra plug, white
- Cable: RG 174, DAB+ 250 mm, Fakra plug, grey (DAB)or green (DVB-T) or violet (DAB/DVB-T)
- Cable: RG 174, GPS 175 mm, Fakra plug, blue

Low loss cables are the cables with the best electrical properties for the lossless transmission of antenna signals. Our lowloss cable series has best conductivity values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Optionally available: articulated joint ATTB_4615_01.

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A3LT0L750UNI

A3LT0L750UNI
389,00 EUR
incl. 19% tax excl. Shipping costs
12V antenna active FM/DAB+ with 2 cables 5m - Delaerset 5 pcs
12V antenna active FM/DAB+ with 2 cables 5m - Delaerset 5 pcs
Excellent roof antenna with the following features:
-flat angle of only 70 degrees, also ideal for front mounting if roof is not exactly horizontal.
- Antenna with short rod, length approx. 23 cm, in 16 V design.
- DAB+ reception 174-237 MHz & 1452-1492 MHz
- VHF/FM reception 87-108 MHz
- 12 V external power supply
- Low installation depth approx. 16 mm
- Amplification: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 100 mA
- Temperature range (-40 degrees to + 85 degrees Celsius)
- Impedance: 50 Ohm (DAB+); 75-150 Ohm (FM)
- Cable to antenna:
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey , code G

Note: This antenna is delivered with the cable set 9552.

9552: 5 metre lowloss cable for VHF/FM (with Fakra socket and DIN plug) and 5 metre lowloss cable for DAB+ (with Fakra socket and SMB socket).

Further versions:

DZ_2113_72 with 2 extension cables 7.5 m (DIN plug/SMB socket).
DZ_2113_L500 with 2 extension cables 5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L750 with 2 extension cables 7.5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)

DZ_2113_L1000 with 2 extension cables 10 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr: DZ_2113_52_05

DZ_2113_52_05
395,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2H, VHF/DAB+/GPS; DIN/ISO/SMB/FAKRA/GT5/GT16, 10 m
Antenna set A2H, VHF/DAB+/GPS; DIN/ISO/SMB/FAKRA/GT5/GT16, 10 m
Now available

As already explained in detail, very good reception is only possible if the antenna is mounted on a conductive metal surface. You can glue these roof bonnets directly onto the roof if there is a possibility to lead the cables into the interior of the vehicle under the roof bonnet.

First, the antenna is screwed to the roof bonnet, then a roof grommet is drilled and the antenna's 30 cm long cables are fed through to the inside of the vehicle.

For bonding and sealing the plastic roof cowl, we recommend the butyl cord (DN-Butyl20) and the adhesive set (DN-SetMS5). Both items are not included in the delivery and must be ordered separately.

Please note that in case of service, the bonding of the roof bonnet must be loosened in order to replace the antenna!

About the product:

Groundplane for GRP roof superstructures. The plastic roof cover with internal metal plate provides the necessary counterpole for the optimum function of car radio antennas on GRP roofs.
The roof bonnet is glued and can also be screwed. For the bonding work, we recommend the optional DEKALIN bonding set DN-SetMS5.

Delivery contents:

1 plastic roof bonnet with internal metal plate
1 antenna for FM/UKW/GPS/GLONASS
1 Drill hole adapter
1 dust protection seal
1 connection cable 10 m for VHF
1 connection cable 10 m for DAB+
1 connection cable 10 m for GPS

Roof antenna with the following features:
- DAB reception, active and low noise in BAND 3 and L (passive)
- VHF/FM/AM reception, active and low noise
- active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN plug-in sleeve (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, grey
- Cable: RG 174, GPS 150 mm, fakra plug, blue

LowLoss cable set, consisting of 2 LowLoss antenna cables with Fakra colour coding for ATTB antennas with FM and DAB+.
Contents:
- 10 metre lowloss cable Fakra socket - Fakra socket, beige.
- 10 metre lowloss cable fakra socket - SMB socket 90 degrees, fakra G, grey

Adapter for VHF:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

GPS Set:
- 10 metre RG174 cable fakra socket - fakra socket, fakra C, blue
- Adapter RG174 fakra plug - GT5 socket for the GPS connection of e.g. Alpine, Kenwood and Clarion devices.
- Adapter RG174 Fakra plug - GT16 socket for the GPS connection of e.g. Pioneer devices.

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Dimensions: 38.5 * 38.5 * 3.5 cm

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3761_32

ATTB_3761_32
399,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A3;FM/DAB+/GPS/DVB-T2; 41cm;10m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A3;FM/DAB+/GPS/DVB-T2; 41cm;10m cable, DIN/ISO/FAKRA/SMB connectors
The antenna A3 is according to our tests, the best antenna at the moment for optimal radio reception in motor homes. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS.
Highlight is the possibility also digital terrestrial television (DVB-T2) to receive. The scope of delivery includes a splitter, which provides DAB + and DVBT2 from one output of the antenna.

Delivery contents:

Antenna A3
Lowloss cable 10 m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 10 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 10 m, Fakra socket - Fakra socket (C-coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Passive splitter for DAB+/DVB-T2
Fakra socket - Fakra socket, 3 m + Fakra plug to coax plug (IEC m) 2 m for DVB-T2

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive)
- VHF/FM/AM reception, active and low noise
- Active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 15 dB - (87.5-108 MHz)
- Gain: AM: 5dB - (0.15-16 MHz)
- Gain: DAB+: 15 dB - (174-230 MHz)
- Gain: DVB-T2+: 12/10 dB - (474-602/610-786 MHz)
- Gain: GPS: 28 dB -(1575.42 MHz)
- Power supply: AM/FM 9-16 volts, 35mA at 12 volts.
- Power supply: DAB+ 5-12 volts, 25mA
- Power supply: GPS+ 3-5.5 volts, 15-40mA

- Cable: RG 174, AM/FM 185 mm, Fakra plug, white
- Cable: RG 174, DAB+ 250 mm, Fakra plug, grey (DAB)or green (DVB-T) or violet (DAB/DVB-T)
- Cable: RG 174, GPS 175 mm, Fakra plug, blue

Low loss cables are the cables with the best electrical properties for the lossless transmission of antenna signals. Our lowloss cable series has best conductivity values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braid
Outer diameter: 3.6 mm

Optionally available: articulated joint ATTB_4615_01.

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A3LT0L1000UNI

A3LT0L1000UNI
409,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2, FM/DAB+/GPS; 23cm, 5m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2, FM/DAB+/GPS; 23cm, 5m cable, DIN/ISO/FAKRA/SMB connectors
The antenna A2 is according to our tests, the best antenna at the moment for optimal radio reception in motor homes. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.

Delivery contents:

Antenna A2
Antenna support 4, stainless steel 360*360*1.5 mm, painted white
Central hole d= 20 mm
2 pcs. mounting bracket, stainless steel 360*50*35 mm, painted white
6 stainless steel screws
Waterproof junction box 15933, pre-drilled with 38 mm for mounting under the central hole
Lowloss cable5m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 5 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 5 m, Fakra socket - Fakra socket (C-coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine,Kenwood, Clarion), (C coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive)
- VHF/FM/AM reception, active and low-noise
- Active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6db
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, grey
- Cable: RG 174, GPS 150 mm, Fakra plug, blue

Low loss cables are the cables with the best electrical properties for the lossless transmission of antenna signals. Our lowloss cable series has best conductivity values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding.
Outer diameter: 3.6 mm

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A2T4L500UNI

A2T4L500UNI
449,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set AS3H for 1 radio and router - cable length 6.5 m
Antenna set AS3H for 1 radio and router - cable length 6.5 m
Highest quality and reliability “Made in Germany”
The ATTB 3799.30 GRP roof antenna set is a solution developed and manufactured by Antennentechnik Bad Blankenburg for retrofitting motorhomes with GRP roof structures. ATTB specializes in wireless networking solutions for various industries and applications. With its own research, development, and production, ATTB has stood for the highest quality and reliability “Made in Germany” since 1919.

We drive connectivity: Networking without compromise
The ATTB 3799.30 GRP roof antenna set establishes reliable, high-performance wireless connections in the areas of broadcasting, mobile communications, navigation, and WLAN and is suitable for mobile outdoor use. It undergoes rigorous testing processes, is manufactured in Germany using high-quality components, and offers first-class transmission and reception performance – even under the most challenging conditions.

Frequency Bands and Communication Services
The ATTB 3799.30 fiberglass roof antenna set covers multiple frequency bands and therefore communication services. These include AM, FM, DAB+, GSM (2G), UMTS (3G), LTE (4G), 5G, GNSS, and WLAN.
• In the radio spectrum, AM (0.1 - 16 MHz), FM (87.5 - 108 MHz), and DAB+ (B III 174 - 237 MHz; L 1452 - 1492 MHz) can be received.
• In the mobile spectrum, 2G/3G/4G/5G services (698 - 960 MHz; 1710 - 1880 MHz; 1900 - 2200 MHz and 2500 - 3800 MHz) are available.
• In addition, GPS and GLONASS navigation signals can be received (1575.42 MHz and 1602 - 1610 MHz).
• A local wireless network (WLAN, WiFi) is available in the frequency bands 2400 - 2485 MHz and 4900 - 5900 MHz built-in

Special Features and Properties
• Improves reception in motorhomes with GRP roof structures
• Requires a 12V power supply for the FM and DAB+ amplifiers via a separate phantom power supply (no external power supply provided)
• Supplied as a complete set with all necessary hardware components for installation
• Easy and straightforward installation
• Offers a very high level of sealing
• Allows for flexible cable routing into the roof
• Ground plane is integrated into the GRP mounting plate
• The GRP mounting plate is attached to the roof using suitable adhesives and sealants
• Shallow installation depth

Dimensions / Weight
• Width: 380 mm
• Height: 340 mm
• Length: 380 mm
• Weight: 2 kg

Scope of delivery
• 2 x roof antennas
• 3 x extension cables, 6.5 m each (FAKRA (f) C to FAKRA (f) C, FAKRA (f) B to FAKRA (f) B, SMA (f) to FAKRA (f) G)
• 4 x extension cables, 1.5 m each
• 1 x dust seal
• 1 x GRP mounting plate
• 4 x anti-rattle pads
• 1 x voltage adapter
• Mounting hardware (nut with claw washer, drill hole adapter, gasket, 16 mm M14/M18 thread adapter)

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3799_30

ATTB_3799_30
449,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2H, FM/DAB+/GPS; DIN/ISO/SMB/FAKRA/GT5/GT16, 7.5 m
Antenna set A2H, FM/DAB+/GPS; DIN/ISO/SMB/FAKRA/GT5/GT16, 7.5 m
Now available

As already explained in detail, very good reception is only possible if the antenna is mounted on a conductive metal surface. You can glue these roof bonnets directly onto the roof if there is a possibility to lead the cables into the interior of the vehicle under the roof bonnet.

First, the antenna is screwed to the roof bonnet, then a roof grommet is drilled and the antenna's 30 cm long cables are fed through to the inside of the vehicle.

For bonding and sealing the plastic roof bonnet we recommend the bonding set (DN-SetMS5). This item is not included in the delivery and must be ordered separately.

Please note that in case of service, the bonding of the roof bonnet must be loosened in order to replace the antenna!

About the product:

Groundplane for GRP roof superstructures. The plastic roof cover with internal metal plate provides the necessary counterpole for the optimum function of car radio antennas on GRP roofs. The roof bonnet is glued and can also be screwed. For the bonding work, we recommend the optional DEKALIN bonding set DN-SetMS5.

Delivery contents:

1 plastic roof bonnet with internal metal plate
1 antenna for FM/UKW/GPS/GLONASS with long antenna radiator, 43cm
1 Drill hole adapter
1 dust protection seal
1 connection cable 7.5 m for FM
1 connection cable 7.5 m for DAB+
1 connection cable 7.5 m for GPS

Roof antenna with the following features:
- DAB reception, active and low noise in BAND 3 and L (passive)
- VHF/FM/AM reception, active and low-noise
- active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN plug-in sleeve (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, grey
- Cable: RG 174, GPS 150 mm, fakra plug, blue

LowLoss cable set, consisting of 2 LowLoss antenna cables with Fakra colour coding for ATTB antennas with FM and DAB+.
Contents:
- 7.5 metre lowloss cable fakra socket - fakra socket, beige
- 7.5 metre lowloss cable fakra socket - SMB socket 90 degrees, fakra G, grey

Adapter for FM:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

GPS set:

- 7.5 metre RG174 cable fakra socket - fakra socket, fakra C, blue
- Adapter RG174 fakra plug - GT5 socket for the GPS connection of e.g. Alpine, Kenwood and Clarion devices.
- Adapter RG174 Fakra plug - GT16 socket for the GPS connection of e.g. Pioneer devices.

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Dimensions: 38.5 * 38.5 * 3.5 cm

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: ATTB_3761L_31

ATTB_3761L_31
449,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2, FM/DAB+/GPS; 23cm, 7,5m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2, FM/DAB+/GPS; 23cm, 7,5m cable, DIN/ISO/FAKRA/SMB connectors
The antenna A2 is according to our tests, the best antenna at the moment for optimal radio reception in motor homes. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.

Delivery contents:

Antenna A2
Antenna support 4, stainless steel 360*360*1.5 mm, painted white
Central hole d= 20 mm
2 pcs. mounting bracket stainless steel 360*50*35 mm, white painted
6 stainless steel screws
Waterproof junction box 15933, pre-drilled with 38 mm for mounting under the central hole
Lowloss cable 7,5m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 7.5 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 7.5 m, Fakra socket - Fakra socket (C-coding, blue)
Adapter 3: Fakra plug - GT5 socket (for e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive)
- VHF/FM/AM reception, active and low-noise
- Active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, grey
- Cable: RG 174, GPS 150 mm, Fakra plug, blue

Low loss cables are the cables with the best electrical properties for the lossless transmission of antenna signals. Our lowloss cable series has best conductivity values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding.
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:
A2T4L750DIN
A2T4L750DYN

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A2T4L750UNI

A2T4L750UNI
458,99 EUR
incl. 19% tax excl. Shipping costs
Antenna set A3 white, FM/DAB+/GPS/DVB-T2; 41cm, 7,5m, DIN/ISO/FAKRA/SMB connecti
Antenna set A3 white, FM/DAB+/GPS/DVB-T2; 41cm, 7,5m, DIN/ISO/FAKRA/SMB connecti
The antenna A3 is according to our tests, the best antenna at the moment for optimal radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS.
Highlight is the possibility also digital terrestrial television (DVB-T2) to receive. The scope of delivery includes a splitter, which provides DAB + and DVBT2 from one output of the antenna.

Delivery contents:

Antenna A3
Antenna support 3, stainless steel 400*400*1 mm, white powder-coated (RAL9003)
Central hole d= 20 mm
Lowloss cable 7,5 m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 7.5 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 5 m, Fakra socket - Fakra socket (C-coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine,Kenwood, Clarion), (C coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Passive splitter for DAB+/DVB-T2
Fakra socket - Fakra socket, 3 m + Fakra plug to coax plug (IEC m) 2 m for DVB-T2

Roof antenna with the following features:
- DAB reception, active and low noise in BAND 3 and L (passive)
- VHF/FM/AM reception, active and low noise
- Active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 15 dB - (87.5-108 MHz)
- Gain: AM: 5dB - (0.15-16 MHz)
- Gain: DAB+: 15 dB - (174-230 MHz)
- Gain: DVB-T2+: 12/10 dB - (474-602/610-786 MHz)
- Gain: GPS: 28 dB -(1575.42 MHz)
- Power supply: AM/FM 9-16 volts, 35mA at 12 volts.
- Power supply: DAB+ 5-12 volts, 25mA
- Power supply: GPS+ 3-5.5 volts, 15-40mA

- Cable: RG 174, AM/FM 185 mm, Fakra plug, white
- Cable: RG 174, DAB+ 250 mm, Fakra plug, grey (DAB)or green (DVB-T) or violet (DAB/DVB-T)
- Cable: RG 174, GPS 175 mm, Fakra plug, blue

Low loss cables are the cables with the best electrical properties for the lossless transmission of antenna signals. Our lowloss cable series has best conductivity values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding.
Outer diameter: 3.6 mm

Optionally available: articulated joint ATTB_4615_01.

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A3LT3L750UNI

A3LT3L750UNI
458,99 EUR
incl. 19% tax excl. Shipping costs
Antenna set A3 white,FM/DAB+/GPS/DVB-T2;41cm;10m cable,DIN/ISO/FAKRA/SMB connect
Antenna set A3 white,FM/DAB+/GPS/DVB-T2;41cm;10m cable,DIN/ISO/FAKRA/SMB connect
The antenna A3 is according to our tests, the best antenna at the moment for optimal radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS.
Highlight is the possibility also digital terrestrial television (DVB-T2) to receive. The scope of delivery includes a splitter, which provides DAB + and DVBT2 from one output of the antenna.

Delivery contents:

Antenna A3
Antenna support 3, stainless steel 400*400*1 mm, white powder-coated (RAL9003)
Central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 10 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 10 m, Fakra socket - Fakra socket (C-coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Passive splitter for DAB+/DVB-T2
Fakra socket - Fakra socket, 3 m + Fakra plug to coax plug (IEC m) 2 m for DVB-T2

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive)
- VHF/FM/AM reception, active and low-noise
- Active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 15 dB - (87.5-108 MHz)
- Gain: AM: 5dB - (0.15-16 MHz)
- Gain: DAB+: 15 dB - (174-230 MHz)
- Gain: DVB-T2+: 12/10 dB - (474-602/610-786 MHz)
- Gain: GPS: 28 dB -(1575.42 MHz)
- Power supply: AM/FM 9-16 volts, 35mA at 12 volts.
- Power supply: DAB+ 5-12 volts, 25mA
- Power supply: GPS+ 3-5.5 volts, 15-40mA

- Cable: RG 174, AM/FM 185 mm, Fakra plug, white
- Cable: RG 174, DAB+ 250 mm, Fakra plug, grey (DAB)or green (DVB-T) or violet (DAB/DVB-T)
- Cable: RG 174, GPS 175 mm, Fakra plug, blue

Low loss cables are the cables with the best electrical properties for the lossless transmission of antenna signals. Our lowloss cable series has best conductivity values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding.
Outer diameter: 3.6 mm

Optionally available: articulated joint ATTB_4615_01.

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A3LT3L1000UNI

A3LT3L1000UNI
469,00 EUR
incl. 19% tax excl. Shipping costs
Antenna set A2, FM/DAB+/GPS; 23cm, 10m cable, DIN/ISO/FAKRA/SMB connectors
Antenna set A2, FM/DAB+/GPS; 23cm, 10m cable, DIN/ISO/FAKRA/SMB connectors
The antenna A2 is according to our tests, the best antenna at the moment for optimal radio reception in motor homes. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.

Delivery contents:

Antenna A2
Antenna support 4, stainless steel 360*360*1.5 mm, painted white
Central hole d= 20 mm
2 pcs. mounting bracket stainless steel 360*50*35 mm, white painted
6 stainless steel screws
Waterproof junction box 15933, pre-drilled with 38 mm for mounting under the central borehole
Lowloss cable 10m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)

Lowloss cable 10 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)

GPS cable 10 m, Fakra socket - Fakra socket (C-coding, blue)
Adapter 3: Fakra plug - GT5 socket (for e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)

Roof antenna with the following features:

- DAB reception, active and low noise in BAND 3 and L (passive)
- VHF/FM/AM reception, active and low-noise
- Active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN socket (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, grey
- Cable: RG 174, GPS 150 mm, Fakra plug, blue

Low loss cables are the cables with the best electrical properties for the lossless transmission of antenna signals. Our lowloss cable series has best conductivity values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional
tinned copper braid Outer diameter: 3.6 mm

Note: This set replaces the previous sets:
A2T4L1000DIN
A2T4L1000DYN

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Art.Nr: A2T4L1000UNI

A2T4L1000UNI
479,00 EUR
incl. 19% tax excl. Shipping costs
1 to 96 (from a total of 101)