Rundantennen 2x2

Stainless steel plate for mounting antennas on mobile homes or special vehicles without metal roof. The plate forms the counter pole necessary for Lamda/quarter radiators, so that 16 V antennas or Kombiflex antennas work optimally. The plate already has a 20 mm hole in the center for mounting all common antennas.
>br> The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery also includes two stainless steel brackets, which are already pre-drilled for 3 screws each. There are no holes in the stainless steel plate yet, so that you can individually determine the height of the antenna support.
>br> Furthermore, the junction box 15933 is included in the delivery. It already has a hole of 35 mm on the adhesive side, so that the antenna base can be fixed optimally on the metal plate.
>br> For bonding work we recommend the optional DEKALIN Adhesive Set DN-SetMS5.

For cable feed-through, we recommend the suitable bushing from Büttner Elektronik (Art. No. 15907).
>br> The stainless steel plate is delivered without antenna. We would be pleased to advise you on all questions concerning antenna technology!

Scope of delivery:

- Antenna support stainless steel 360*360*1,5 mm with a 20 mm bore
- 2 stainless steel angles 360*50*35 mm
- 6 stainless steel screws with nuts, M5
- 10 stainless steel screws cross recess for distribution box
- Junction box 15933 pre-drilled, d=35 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Stainless steel plate for mounting antennas on mobile homes or special vehicles without metal roof. The plate forms the counter pole necessary for Lamda/quarter radiators, so that 16 V antennas or Kombiflex antennas work optimally. The plate already has a 20 mm hole in the center for mounting all common antennas.
>br> The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery also includes two stainless steel brackets, which are already pre-drilled for 3 screws each. There are no holes in the stainless steel plate yet, so that you can individually determine the height of the antenna support.
>br> Furthermore, the junction box 15933 is included in the delivery. It already has a hole of 35 mm on the adhesive side, so that the antenna base can be fixed optimally on the metal plate.
>br> For bonding work we recommend the optional DEKALIN Adhesive Set DN-SetMS5.

For cable feed-through, we recommend the suitable bushing from Büttner Elektronik (Art. No. 15907).
>br> The stainless steel plate is delivered without antenna. We would be pleased to advise you on all questions concerning antenna technology!

Scope of delivery:

- Antenna support stainless steel 360*360*1,5 mm with a 20 mm bore
- 2 stainless steel angles 360*50*35 mm
- 6 stainless steel screws with nuts, M5
- 10 stainless steel screws cross recess for distribution box
- Junction box 15933 pre-drilled, d=35 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Stainless steel plate for mounting antennas on mobile homes or special vehicles without and with metal roof. The plate forms the counter pole necessary for Lamda/quarter radiators, so that 16 V antennas or Kombiflex antennas work optimally. The plate already has a 20 mm hole in the center for mounting all common antennas.
>br> The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery also includes two stainless steel brackets, which are already pre-drilled for 2 screws each.
>br> Furthermore, the junction box 15934 is included in the delivery. It already has a hole of 35 mm on the adhesive side, so that the antenna base can be fixed optimally on the metal plate.
>br> For bonding work we recommend the optional DEKALIN Adhesive Set DN-SetMS5.

For cable feed-through, we recommend the suitable bushing from Büttner Elektronik (Art. No. 15907).
>br> The stainless steel plate is delivered without antenna. We would be pleased to advise you on all questions concerning antenna technology!

Scope of delivery:

- Antenna support stainless steel 370*320*1,5 mm with a 20 mm bore
- 2 stainless steel angles 210*50*35 mm
- 6 stainless steel screws with nuts, M5
- 10 stainless steel screws cross recess for distribution box
- Junction box 15934 pre-drilled, d=35 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Panorama antenna suitable for all LTE and 5G routers without GPS input.

The antenna features 2 receiving elements for LTE/5G.

Technical data:

Colour: white

Frequency
Element1: 617-960MHz, 1710-6000MHz
Element2: 617-960MHz, 1710-6000MHz


Gain:
Element 1&2 @617-960MHz 5dBi
Element 1&2 @1710-3800MHz 9dBi
Element 1&2 @4900-6000MHz 10dBi

Typical efficiency:
Element 1&2: 70%
Isolation: LTE >12dB
Resistance: 50 Ohm

Dimensions: Height 75mm/ Diameter 180mm
Mounting: 1-hole mounting 19 mm
Cable length to antenna: 0.3m

Connector:
SMA male(m) [4G/5G]



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
*************************************************************************************************

Panorama antenna suitable for all LTE and 5G routers without GPS input.

The antenna features 2 receiving elements for LTE/5G.

Technical data:

Colour: black

Frequency
Element1: 617-960MHz, 1710-6000MHz
Element2: 617-960MHz, 1710-6000MHz


Gain:
Element 1&2 @617-960MHz 5dBi
Element 1&2 @1710-3800MHz 9dBi
Element 1&2 @4900-6000MHz 10dBi

Typical efficiency:
Element 1&2: 70%
Isolation: LTE >12dB
Resistance: 50 Ohm

Dimensions: Height 75mm/ Diameter 180mm
Mounting: 1-hole mounting 19 mm
Cable length to antenna: 0.3m

Connector:
SMA male(m) [4G/5G]



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
*************************************************************************************************

Panorama antenna suitable for all LTE and 5G routers without GPS input.

Especially for Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers.

The antenna features 2 receiving elements for LTE/5G and two receiving elements for WLAN.

Technical data:

Colour: white

Frequency
Element1: 617-960MHz, 1710-6000MHz
Element2: 617-960MHz, 1710-6000MHz
Element3: 2400/4900-6000MHz
Element4: 2400/4900-6000MHz

Gain:
Element 1&2 @617-960MHz 5dBi
Element 1&2 @1710-3800MHz 9dBi
Element 1&2 @4900-6000MHz 10dBi
Element 3-4 @2400MHz 8dBi
Element 3-4 @4900-6000MHz 10dBi

Typical efficiency:
Element 1&2: 70%
Element 3-4: 80%
Isolation: LTE >12dB, WIFI >20dB
Resistance: 50 Ohm

Dimensions: Height 75mm/ Diameter 180mm
Mounting: 1-hole mounting 19 mm
Cable length to antenna: 0.3m

Connector:
SMA male(m) [4G/5G]
SMA socket(f) [WIFI]

Cordset recommendation:
We recommend the optional cable sets UNI-5L150 (length 1.5m) or UNI-5L300 (length 3.0m).

Note: If you want to connect the antenna directly to a router with SMA connectors, you will also need the following adapters:
2 x PAN-SAM-101 (for Wlan).

This antenna is also available in the following versions:

PAN-ANT330B: Black with cable set in 3.0 m
PAN-ANT315B: Black with cable set in 1.5 m
PAN-ANT330: White with cable set in 3.0 m
PAN-ANT315: White with cable set in 1.5 m


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
*************************************************************************************************

Panorama antenna suitable for all LTE and 5G routers.

Especially for RUTX14, RUTX12, but also downward compatible with RutX11, Rut956, Rut955, Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers.

The antenna features 2 receiving elements for LTE/5G.

Technical data:

Colour: black

Frequency
Element1: 617-960MHz, 1710-6000MHz
Element2: 617-960MHz, 1710-6000MHz
Element3: 2400/4900-6000MHz
Element4: 2400/4900-6000MHz
Element5: 1562-1612MHz (GPS;GNSS)

Gain:
Element 1&2 @617-960MHz 5dBi
Element 1&2 @1710-3800MHz 9dBi
Element 1&2 @4900-6000MHz 10dBi
Element 3-4 @2400MHz 8dBi
Element 3-4 @4900-6000MHz 10dBi
Element 5 @1562-1612MHz (GPS;GNSS) 26dB LNA

Typical efficiency:
Element 1&2: 70%
Element 3-4: 80%
Isolation: LTE >12dB, WIFI >20dB
Resistance: 50 Ohm

Dimensions: Height 75mm/ Diameter 180mm
Mounting: 1-hole mounting 19 mm
Cable length to antenna: 0.3m

Connector:
SMA male(m) [4G/5G]
SMA socket(f) [WIFI]
FME jack(f) [GPS]

Cordset recommendation:
We recommend the optional cable sets UNI-5L150 (length 1.5m) or UNI-5L300 (length 3.0m).

Note: If you want to connect the antenna directly to a router with SMA connectors, you will also need the following adapters:
2 x PAN-SAM-101 (for Wlan)
1 x PAN-SAM-102 (for GPS)

This antenna is also available in the following versions:

PAN-ANT430B: Black with cable set in 3.0 m
PAN-ANT415B: Black with cable set in 1.5 m
PAN-ANT430: White with cable set in 3.0 m
PAN-ANT415: White with cable set in 1.5 m


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
*************************************************************************************************

Panorama antenna suitable for all LTE and 5G routers without GPS input.

Especially for Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers.

The antenna features 2 receiving elements for LTE/5G and two receiving elements for WLAN.

Technical data:

Colour: white

Frequency
Element1: 617-960MHz, 1710-6000MHz
Element2: 617-960MHz, 1710-6000MHz
Element3: 2400/4900-6000MHz
Element4: 2400/4900-6000MHz

Gain:
Element 1&2 @617-960MHz 5dBi
Element 1&2 @1710-3800MHz 9dBi
Element 1&2 @4900-6000MHz 10dBi
Element 3-4 @2400MHz 8dBi
Element 3-4 @4900-6000MHz 10dBi

Typical efficiency:
Element 1&2: 70%
Element 3-4: 80%
Isolation: LTE >12dB, WIFI >20dB
Resistance: 50 Ohm

Dimensions: Height 75mm/ Diameter 180mm
Mounting: 1-hole mounting 19 mm
Cable length to antenna: 0.3m

Connector:
SMA male(m) [4G/5G]
SMA socket(f) [WIFI]

Cable set:
The antenna is supplied with a cable set consisting of 4 cables for the above routers, each 1.5 metres in length:
2 x LTE with SMA connector
2 x WLAN with SMA RP connector

This antenna is available in the following versions:

PAN-ANT330B: Black with cable set in 3.0 m
PAN-ANT315B: Black with cable set in 1.5 m
PAN-ANT330: White with cable set in 3.0 m
PAN-ANT315: White with cable set in 1.5 m



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Panorama antenna suitable for all LTE and 5G routers without GPS input.

Especially for Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers.

The antenna features 2 receiving elements for LTE/5G and two receiving elements for WLAN.

Technical data:

Colour: white

Frequency
Element1: 617-960MHz, 1710-6000MHz
Element2: 617-960MHz, 1710-6000MHz
Element3: 2400/4900-6000MHz
Element4: 2400/4900-6000MHz

Gain:
Element 1&2 @617-960MHz 5dBi
Element 1&2 @1710-3800MHz 9dBi
Element 1&2 @4900-6000MHz 10dBi
Element 3-4 @2400MHz 8dBi
Element 3-4 @4900-6000MHz 10dBi

Typical efficiency:
Element 1&2: 70%
Element 3-4: 80%
Isolation: LTE >12dB, WIFI >20dB
Resistance: 50 Ohm

Dimensions: Height 75mm/ Diameter 180mm
Mounting: 1-hole mounting 19 mm
Cable length to antenna: 0.3m

Connector:
SMA connector(m) [4G/5G].
SMA connector(m) Reverse [WIFI]

Cable set:
The antenna is supplied with a cable set consisting of 4 cables for the above routers, each 3.0 metres in length:
2 x LTE with SMA connector
2 x WLAN with SMA RP connector

This antenna is available in the following versions:

PAN-ANT330B: Black with cable set in 3.0 m
PAN-ANT315B: Black with cable set in 1.5 m
PAN-ANT330: White with cable set in 3.0 m
PAN-ANT315: White with cable set in 1.5 m


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Panorama antenna suitable for all LTE and 5G routers.

Especially for RUTX14, RUTX12, but also downward compatible with RutX11, Rut956, Rut955, Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers.

The antenna features 2 receiving elements for LTE/5G.

Technical data:

Colour: black

Frequency
Element1: 617-960MHz, 1710-6000MHz
Element2: 617-960MHz, 1710-6000MHz
Element3: 2400/4900-6000MHz
Element4: 2400/4900-6000MHz
Element5: 1562-1612MHz (GPS;GNSS)

Gain:
Element 1&2 @617-960MHz 5dBi
Element 1&2 @1710-3800MHz 9dBi
Element 1&2 @4900-6000MHz 10dBi
Element 3-4 @2400MHz 8dBi
Element 3-4 @4900-6000MHz 10dBi
Element 5 @1562-1612MHz (GPS;GNSS) 26dB LNA

Typical efficiency:
Element 1&2: 70%
Element 3-4: 80%
Isolation: LTE >12dB, WIFI >20dB
Resistance: 50 Ohm

Dimensions: Height 75mm/ Diameter 180mm
Mounting: 1-hole mounting 19 mm
Cable length to antenna: 0.3m

Connector:
SMA connector(m) [4G/5G].
SMA plug(m) Reverse [WIFI]
FME female(f) [GPS].

Cable set:
The antenna is supplied with a cable set consisting of 5 cables for the above routers, each 1.5 metres long:
2 x LTE with SMA connector
2 x WLAN with SMA RP connector
1 x GPS with SMA connector

This antenna is available in the following versions:

PAN-ANT430B: Black with cable set in 3.0 m
PAN-ANT415B: Black with cable set in 1.5 m
PAN-ANT430: White with cable set in 3.0 m
PAN-ANT415: White with cable set in 1.5 m



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Panorama antenna suitable for all LTE and 5G routers.

Especially for RUTX14, RUTX12, but also downward compatible with RutX11, Rut956, Rut955, Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers.

The antenna features 2 receiving elements for LTE/5G.

Technical data:

Colour: black

Frequency
Element1: 617-960MHz, 1710-6000MHz
Element2: 617-960MHz, 1710-6000MHz
Element3: 2400/4900-6000MHz
Element4: 2400/4900-6000MHz
Element5: 1562-1612MHz (GPS;GNSS)

Gain:
Element 1&2 @617-960MHz 5dBi
Element 1&2 @1710-3800MHz 9dBi
Element 1&2 @4900-6000MHz 10dBi
Element 3-4 @2400MHz 8dBi
Element 3-4 @4900-6000MHz 10dBi
Element 5 @1562-1612MHz (GPS;GNSS) 26dB LNA

Typical efficiency:
Element 1&2: 70%
Element 3-4: 80%
Isolation: LTE >12dB, WIFI >20dB
Resistance: 50 Ohm

Dimensions: Height 75mm/ Diameter 180mm
Mounting: 1-hole mounting 19 mm
Cable length to antenna: 0.3m

Connector:
SMA male(m) [4G/5G]
SMA socket(f) [WIFI]
FME female(f) [GPS].

Cable set:
The antenna is supplied with a cable set consisting of 5 cables for the above routers in the length of 3 metres each:
2 x LTE with SMA connector
2 x WLAN with SMA RP connector
1 x GPS with SMA connector

This antenna is available in the following versions:

PAN-ANT430B: Black with cable set in 3.0 m
PAN-ANT415B: Black with cable set in 1.5 m
PAN-ANT430: White with cable set in 3.0 m
PAN-ANT415: White with cable set in 1.5 m



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************