Antennenmessgeräte

Aluminum plate powder-coated white (RAL9003) for mounting antennas on motorhomes or special vehicles without a metal roof. The plate forms the counter pole necessary for lamda/quarter radiators so that 16 V antennas or Kombiflex antennas function optimally. The plate already has a 20 mm and a 22 mm hole in the centre for mounting all common antennas.
The second hole is for the second antenna, which is especially needed for 5G/LTE/WLAN routers, such as Campernet or Teltronika or other routers with Mimo technology.

The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery includes two stainless steel brackets, which are already pre-drilled for 3 screws each.

Furthermore, two junction boxes 15934 are already glued to the underside of the antenna support. This protects the antenna's cable connections from moisture.

For the bonding work we recommend the optional DEKALIN bonding set DN-SetMS5.

For cable entry we recommend a combination of the optional junction box 15934 with the roof bushings 15921/15922 or 15923. Please note the Youtube video linked to the articles 15921/15922 and 15923 and here:
https://www.youtube.com/watch?v=_07czJ_uubs

The stainless steel plate is delivered without antennas. We will be happy to advise you on all questions regarding antenna technology!

Scope of delivery:
- Antenna support stainless steel 570*360*1,5 mm with two holes 20/22 mm, height 70 mm, white powder coated (RAL9003)
- 2 stainless steel brackets 360*50*35 mm, powder-coated white (RAL9003)
- 6 stainless steel screws with nuts, M5
- 20 stainless steel screws cross recess for junction box
- Junction box 15934 pre-drilled, d=35 mm
- Junction box 15934 pre-drilled, d=35 mm

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

RF spectrum analyser with measurement ranges preset by us for the measurement and evaluation of the following signals:

- FM range
- DAB+ range
- FM & DAB+
- DVB T2 range
- Federal Mux 5C
- Channel 5
- Channel 6
- Channel 7
- Channel 8
- Channel 9
- Channel 10
- Channel 11
- Channel 12

The "FM & DAB+" measuring range shows you immediately whether an existing antenna can also be used for DAB+ with the aid of a splitter insert.

A detailed German manual is enclosed, especially for the daily measurements in the car. From time to time, our customers receive separate supplements and new presettings free of charge by circular email. Our dealer training courses and hotline consultations are based on the availability of this measuring device. The next training courses on antenna measurement technology will take place in summer 2021. More information on our dealer training courses and antenna measurement technology can be found at www.dietz.biz

Set contents:

- Measuring device from 50 kHz to 960 MHZ with presettings already set by us.
- Reference magnetic base antenna: ATTB_4403_80
- 5 typical adapters for the above measurements, plus a phantom adapter with plus and minus connection for measuring active antennas
- aluminium case
- Detailed German instructions for the measurement method we recommend


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************