Hai-Antennen 4x2

Stainless steel plate for mounting antennas on mobile homes or special vehicles without metal roof. The plate forms the counter pole necessary for Lamda/quarter radiators, so that 16 V antennas or Kombiflex antennas work optimally. The plate already has a 20 mm hole in the center for mounting all common antennas.
>br> The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery also includes two stainless steel brackets, which are already pre-drilled for 3 screws each. There are no holes in the stainless steel plate yet, so that you can individually determine the height of the antenna support.
>br> Furthermore, the junction box 15933 is included in the delivery. It already has a hole of 35 mm on the adhesive side, so that the antenna base can be fixed optimally on the metal plate.
>br> For bonding work we recommend the optional DEKALIN Adhesive Set DN-SetMS5.

For cable feed-through, we recommend the suitable bushing from Büttner Elektronik (Art. No. 15907).
>br> The stainless steel plate is delivered without antenna. We would be pleased to advise you on all questions concerning antenna technology!

Scope of delivery:

- Antenna support stainless steel 360*360*1,5 mm with a 20 mm bore
- 2 stainless steel angles 360*50*35 mm
- 6 stainless steel screws with nuts, M5
- 10 stainless steel screws cross recess for distribution box
- Junction box 15933 pre-drilled, d=35 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Stainless steel plate for mounting antennas on mobile homes or special vehicles without metal roof. The plate forms the counter pole necessary for Lamda/quarter radiators, so that 16 V antennas or Kombiflex antennas work optimally. The plate already has a 20 mm hole in the center for mounting all common antennas.
>br> The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery also includes two stainless steel brackets, which are already pre-drilled for 3 screws each. There are no holes in the stainless steel plate yet, so that you can individually determine the height of the antenna support.
>br> Furthermore, the junction box 15933 is included in the delivery. It already has a hole of 35 mm on the adhesive side, so that the antenna base can be fixed optimally on the metal plate.
>br> For bonding work we recommend the optional DEKALIN Adhesive Set DN-SetMS5.

For cable feed-through, we recommend the suitable bushing from Büttner Elektronik (Art. No. 15907).
>br> The stainless steel plate is delivered without antenna. We would be pleased to advise you on all questions concerning antenna technology!

Scope of delivery:

- Antenna support stainless steel 360*360*1,5 mm with a 20 mm bore
- 2 stainless steel angles 360*50*35 mm
- 6 stainless steel screws with nuts, M5
- 10 stainless steel screws cross recess for distribution box
- Junction box 15933 pre-drilled, d=35 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Stainless steel plate for mounting antennas on mobile homes or special vehicles without and with metal roof. The plate forms the counter pole necessary for Lamda/quarter radiators, so that 16 V antennas or Kombiflex antennas work optimally. The plate already has a 20 mm hole in the center for mounting all common antennas.
>br> The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery also includes two stainless steel brackets, which are already pre-drilled for 2 screws each.
>br> Furthermore, the junction box 15934 is included in the delivery. It already has a hole of 35 mm on the adhesive side, so that the antenna base can be fixed optimally on the metal plate.
>br> For bonding work we recommend the optional DEKALIN Adhesive Set DN-SetMS5.

For cable feed-through, we recommend the suitable bushing from Büttner Elektronik (Art. No. 15907).
>br> The stainless steel plate is delivered without antenna. We would be pleased to advise you on all questions concerning antenna technology!

Scope of delivery:

- Antenna support stainless steel 370*320*1,5 mm with a 20 mm bore
- 2 stainless steel angles 210*50*35 mm
- 6 stainless steel screws with nuts, M5
- 10 stainless steel screws cross recess for distribution box
- Junction box 15934 pre-drilled, d=35 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Stainless steel plate for mounting antennas on mobile homes or special vehicles without and with metal roof. The plate forms the counter pole necessary for Lamda/quarter radiators, so that 16 V antennas or Kombiflex antennas work optimally. The plate already has a 20 mm hole in the center for mounting all common antennas.
>br> The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery also includes two stainless steel brackets, which are already pre-drilled for 2 screws each.
>br> Furthermore, the junction box 15934 is included in the delivery. It already has a hole of 35 mm on the adhesive side, so that the antenna base can be fixed optimally on the metal plate.
>br> For bonding work we recommend the optional DEKALIN Adhesive Set DN-SetMS5.

For cable feed-through, we recommend the suitable bushing from Büttner Elektronik (Art. No. 15907).
>br> The stainless steel plate is delivered without antenna. We would be pleased to advise you on all questions concerning antenna technology!

Scope of delivery:

- Antenna support stainless steel 370*320*1,5 mm with a 20 mm bore
- 2 stainless steel angles 210*50*35 mm
- 6 stainless steel screws with nuts, M5
- 10 stainless steel screws cross recess for distribution box
- Junction box 15934 pre-drilled, d=35 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Original item number: GPSD4-6-60-D from the GPS[X]D4[X]-6-60[-X] series.

Panorama antenna suitable for all LTE and 5G routers.

Especially for RUTX14, RUTX12, but also downward compatible to RutX11, Rut956, Rut955, Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers.

The antenna is characterised by 4 receiving elements for LTE/5G. Thus, it supports especially the high-speed 5G routers, allowing 2 modems to be used in parallel and thus doubling the transmission speed.

Technical data:

GPS/GNSS Elements: 1x 1562-1612 MHz
4G/5G Elements: 4x 617-960, 1427-6000 MHz
WiFi Elements: 2x 2.4/5.0/7.1GHz
Auxiliary radiator connection: Radiator-dependent (optional for FM/DAB+)

Peak gain: Isotropic*:

4G/5G Elements:
5dBi (617-960MHz)
8dBi (1427-4200MHz)
9dBi (4900-6000MHz)
WiFi Elements:
7dBi (2396-2485MHz)
11dBi (4900-7200MHz)
(For further technical data, see additional pictures)
GPS/GNSS Data:
Frequency Range (MHz): 1562-1612
Gain: LNA: 26dB
Polarisation: Right Hand Circular
Operating Voltage: 3-5V DC (fed via coax)
Current: Typical <20mA

Dimensions:
Overall height: 82 mm
Overall length: 253 mm
Width: 142 mm

Temperature range: -40° / +80°C
Material: ASA, Silicone Rubber, Aluminium Alloy
Protection class: IP69K

Drill hole: 19-20 mm

Cable type: FR RG174 (UN ECE R 118 Compliant)
Diameter: 2.9 mm
Length: 30 cm

Connectors:

4 x SMA male (m) [4G/5G]
2 x SMA socket (f) [WIFI / WLAN]
1 x FME socket (f) [GPS/GNSS]
1 x FME connector (m) for optional VHF/DAB+

Colour: black

Cable set recommendation:
We recommend the optional cable sets UNI-7L150 (length 1.5m) or UNI-7L300 (length 3.0m).
Note: If you want to connect the antenna directly to a router with SMA connectors, you will also need the following adapters:
2 x PAN-SAM-101 (for WLAN)
1 x PAN-SAM-102 (for GPS)

This antenna is also supplied as the following versions:

PAN-ANT6530B: Black with cable set in 3.0 m
PAN-ANT615B: Black with cable set in 1.5 m

Special feature:

The special feature of this antenna is that the antenna has a 6th connection for combinations of FM; DAB+. With an optional antenna/amplifier/cable kit, this connection can be used for the functions mentioned. In this case, the antenna then has to be installed on a ground plane, i.e. mounted on metal. If the roof is of a non-conductive material, the following antenna mounts can be used: 15901, 15903, 15904 or 15906.

Please order separately:
Supplementary set for VHF and DAB+
PAN-ANT285 (5.0m cable length)
PAN-ANT287 (7.5m cable length)


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
*************************************************************************************************

Original item number: GPSD4-6-60-D from the GPS[X]D4[X]-6-60[-X] series.

Panorama antenna suitable for all LTE and 5G routers.

Especially for RUTX14, RUTX12, but also downward compatible to RutX11, Rut956, Rut955, Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers.

The antenna is characterised by 4 receiving elements for LTE/5G. Thus, it supports especially the high-speed 5G routers, allowing 2 modems to be used in parallel and thus doubling the transmission speed.

Technical data:

GPS/GNSS Elements: 1x 1562-1612 MHz
4G/5G Elements: 4x 617-960, 1427-6000 MHz
WiFi Elements: 2x 2.4/5.0/7.1GHz
Auxiliary radiator connection: Radiator-dependent (optional for FM/DAB+)

Peak gain: Isotropic*:

4G/5G Elements:
5dBi (617-960MHz)
8dBi (1427-4200MHz)
9dBi (4900-6000MHz)
WiFi Elements:
7dBi (2396-2485MHz)
11dBi (4900-7200MHz)
(For further technical data, see additional pictures)
GPS/GNSS Data:
Frequency Range (MHz): 1562-1612
Gain: LNA: 26dB
Polarisation: Right Hand Circular
Operating Voltage: 3-5V DC (fed via coax)
Current: Typical <20mA

Dimensions:
Overall height: 82 mm
Overall length: 253 mm
Width: 142 mm

Temperature range: -40° / +80°C
Material: ASA, Silicone Rubber, Aluminium Alloy
Protection class: IP69K

Drill hole: 19-20 mm

Cable type: FR RG174 (UN ECE R 118 Compliant)
Diameter: 2.9 mm
Length: 30 cm

Connectors:

4 x SMA male (m) [4G/5G]
2 x SMA socket (f) [WIFI / WLAN]
1 x FME socket (f) [GPS/GNSS]
1 x FME connector (m) for optional VHF/DAB+

Colour: white

Cable set recommendation:
We recommend the optional cable sets UNI-7L150 (length 1.5m) or UNI-7L300 (length 3.0m).
Note: If you want to connect the antenna directly to a router with SMA connectors, you will also need the following adapters:
2 x PAN-SAM-101 (for WLAN)
1 x PAN-SAM-102 (for GPS)

This antenna is also supplied as the following versions:

PAN-ANT6530: White with cable set in 3.0 m
PAN-ANT615: White with cable set in 1.5 m

Special feature:

The special feature of this antenna is that the antenna has a 6th connection for combinations of FM; DAB+. With an optional antenna/amplifier/cable kit, this connection can be used for the functions mentioned. In this case, the antenna then has to be installed on a ground plane, i.e. mounted on metal. If the roof is of a non-conductive material, the following antenna mounts can be used: 15903, 15904 or 15906.

Please order separately:
Supplementary set for VHF and DAB+
PAN-ANT285 (5.0m cable length)
PAN-ANT287 (7.5m cable length)


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
*************************************************************************************************

Original item number: GPSD4-6-60-D from the GPS[X]D4[X]-6-60[-X] series.

Panorama antenna suitable for all LTE and 5G routers.

Especially for RUTC50, RUTX14, RUTX12 routers.

The antenna is characterised by 4 receiving elements for LTE/5G. Thus, 3 elements for Wi-FI (Mimo 3x3). It supports especially the high-speed 5G routers

Technical data:

GPS/GNSS Elements: 1x 1562-1612 MHz
4G/5G Elements: 4x 617-960, 1427-6000 MHz
WiFi Elements: 3x 2.4/5.0/7.1GHz
Auxiliary radiator connection: Radiator-dependent (optional for FM/DAB+)

Peak gain: Isotropic*:

4G/5G Elements:
5dBi (617-960MHz)
8dBi (1427-4200MHz)
9dBi (4900-6000MHz)
WiFi Elements:
7dBi (2396-2485MHz)
11dBi (4900-7200MHz)
(For further technical data, see additional pictures)
GPS/GNSS Data:
Frequency Range (MHz): 1562-1612
Gain: LNA: 26dB
Polarisation: Right Hand Circular
Operating Voltage: 3-5V DC (fed via coax)
Current: Typical <20mA

Dimensions:
Overall height: 82 mm
Overall length: 253 mm
Width: 142 mm

Temperature range: -40° / +80°C
Material: ASA, Silicone Rubber, Aluminium Alloy
Protection class: IP69K

Drill hole: 19-20 mm

Cable type: FR RG174 (UN ECE R 118 Compliant)
Diameter: 2.9 mm
Length: 30 cm

Connectors:

4 x SMA male (m) [4G/5G]
3 x SMA socket (f) [WIFI / WLAN]
1 x FME socket (f) [GPS/GNSS]
1 x FME connector (m) for optional VHF/DAB+

Colour: white

Cable set recommendation:
We recommend the optional cable sets UNI-7L150 (length 1.5m) or UNI-7L300 (length 3.0m).
Note: If you want to connect the antenna directly to a router with SMA connectors, you will also need the following adapters:
3 x PAN-SAM-101 (for WLAN)
1 x PAN-SAM-102 (for GPS)

This antenna is also supplied as the following versions:

PAN-ANT830: White with cable set in 3.0 m
PAN-ANT815: White with cable set in 1.5 m

Special feature:

The special feature of this antenna is that the antenna has a 6th connection for combinations of FM; DAB+. With an optional antenna/amplifier/cable kit, this connection can be used for the functions mentioned. In this case, the antenna then has to be installed on a ground plane, i.e. mounted on metal. If the roof is of a non-conductive material, the following antenna mounts can be used: 15903, 15904 or 15906.

Please order separately:
Supplementary set for VHF and DAB+
PAN-ANT285 (5.0m cable length)
PAN-ANT287 (7.5m cable length)


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
*************************************************************************************************

Original item number: GPSD4-6-60-D from the GPS[X]D4[X]-6-60[-X] series.

Panorama antenna suitable for all LTE and 5G routers.

Especially for RUTC50, RUTX14, RUTX12 routers.

The antenna is characterised by 4 receiving elements for LTE/5G. Thus, 3 elements for Wi-FI (Mimo 3x3). It supports especially the high-speed 5G routers

Technical data:

GPS/GNSS Elements: 1x 1562-1612 MHz
4G/5G Elements: 4x 617-960, 1427-6000 MHz
WiFi Elements: 3x 2.4/5.0/7.1GHz
Auxiliary radiator connection: Radiator-dependent (optional for FM/DAB+)

Peak gain: Isotropic*:

4G/5G Elements:
5dBi (617-960MHz)
8dBi (1427-4200MHz)
9dBi (4900-6000MHz)
WiFi Elements:
7dBi (2396-2485MHz)
11dBi (4900-7200MHz)
(For further technical data, see additional pictures)
GPS/GNSS Data:
Frequency Range (MHz): 1562-1612
Gain: LNA: 26dB
Polarisation: Right Hand Circular
Operating Voltage: 3-5V DC (fed via coax)
Current: Typical <20mA

Dimensions:
Overall height: 82 mm
Overall length: 253 mm
Width: 142 mm

Temperature range: -40° / +80°C
Material: ASA, Silicone Rubber, Aluminium Alloy
Protection class: IP69K

Drill hole: 19-20 mm

Cable type: FR RG174 (UN ECE R 118 Compliant)
Diameter: 2.9 mm
Length: 30 cm

Connectors:

4 x SMA male (m) [4G/5G]
3 x SMA socket (f) [WIFI / WLAN]
1 x FME socket (f) [GPS/GNSS]
1 x FME connector (m) for optional VHF/DAB+

Colour: white

Cable set recommendation:
We recommend the optional cable sets UNI-7L150 (length 1.5m) or UNI-7L300 (length 3.0m).
Note: If you want to connect the antenna directly to a router with SMA connectors, you will also need the following adapters:
3 x PAN-SAM-101 (for WLAN)
1 x PAN-SAM-102 (for GPS)

This antenna is also supplied as the following versions:

PAN-ANT830: White with cable set in 3.0 m
PAN-ANT815: White with cable set in 1.5 m

Special feature:

The special feature of this antenna is that the antenna has a 6th connection for combinations of FM; DAB+. With an optional antenna/amplifier/cable kit, this connection can be used for the functions mentioned. In this case, the antenna then has to be installed on a ground plane, i.e. mounted on metal. If the roof is of a non-conductive material, the following antenna mounts can be used: 15903, 15904 or 15906.

Please order separately:
Supplementary set for VHF and DAB+
PAN-ANT285 (5.0m cable length)
PAN-ANT287 (7.5m cable length)


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
*************************************************************************************************

Original item number: GPSD4-6-60-D from the GPS[X]D4[X]-6-60[-X] series.

Panorama antenna suitable for all LTE and 5G routers.

Especially for RUTX50, RUTX14, RUTX12, but also downward compatible to RutX11, Rut956, Rut955, Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers.

The antenna is characterised by 4 receiving elements for LTE/5G. Thus, it supports especially the fast 5G routers, which allow to use 2 modems in parallel and thus to double the transmission speed.

Technical data:

GPS/GNSS Elements: 1x 1562-1612 MHz
4G/5G Elements: 4x 617-960, 1427-6000 MHz
WiFi Elements: 2x 2.4/5.0/7.1GHz
Auxiliary radiator connection: Radiator dependent (optional for FM/DAB+)

Peak gain: Isotropic*:

4G/5G Elements:
5dBi (617-960MHz)
8dBi (1427-4200MHz)
9dBi (4900-6000MHz)

WiFi elements:
7dBi (2396-2485MHz)
11dBi (4900-7200MHz)
(For further technical data, see additional pictures)

GPS/GNSS data:
Frequency range (MHz): 1562-1612
Gain: LNA: 26dB
Polarisation: Right-hand circular
Operating voltage: 3-5V DC (powered via coax)
Current: Typically <20mA

Dimensions:

Overall height: 82 mm
Overall length: 253 mm
Width: 142 mm

Temperature range: -40° / +80°C
Material: ASA, silicone rubber, aluminium alloy
Protection class: IP69K
Drill hole: 19-20 mm
Cable type: FR RG174 (UN ECE R 118 Compliant)
Diameter: 2.9 mm
Length: 30 cm

Connections to antenna:

4 x SMA male (m) [4G/5G]
2 x SMA socket (f) [WIFI / WLAN]
1 x FME socket (f) [GPS/GNSS]
1 x FME connector (m) for optional FM/DAB+

Colour: white

Cable set:
The antenna is supplied with a cable set consisting of 7 cables for the above routers, each 1.5 metres long:
4 x 5G/LTE with SMA connector
2 x WLAN with SMA RP connector
1 x GPS with SMA connector

Note: If you want to connect the antenna directly to a router with SMA connectors, you will also need the following adapters:
2 x PAN-SAM-101 (for Wlan)
1 x PAN-SAM-102 (for GPS)

This antenna is available in the following versions:

PAN-ANT630B: Black with cable set in 3.0 m
PAN-ANT615B: Black with cable set in 1.5 m
PAN-ANT630: White with cable set in 3.0 m
PAN-ANT615: White with cable set in 1.5 m

Special feature:

The special feature of this antenna is that the antenna has an 8th connection for combinations of FM; DAB+. With an optional radiator/amplifier/cable kit, this connection can be used for the functions mentioned. In this case, the antenna must then have a ground plane, i.e. be mounted on metal. If the roof is made of a non-conductive material, the following antenna supports can be used: 15903, 15904 or 15906. Please order separately.

Supplementary set for VHF and DAB+
PAN-ANT285 (5.0m cable length)
PAN-ANT287 (7.5m cable length)
PAN-ANT2810 (10.0m cable length)
Please order separately.



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Original item number: GPSD4-6-60-D from the GPS[X]D4[X]-6-60[-X] series.

Panorama antenna suitable for all LTE and 5G routers.

Especially for RUTX50, RUTX14, RUTX12, but also downward compatible to RutX11, Rut956, Rut955, Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers.

The antenna is characterised by 4 receiving elements for LTE/5G. Thus, it supports especially the fast 5G routers, which allow to use 2 modems in parallel and thus to double the transmission speed.

Technical data:

GPS/GNSS Elements: 1x 1562-1612 MHz
4G/5G Elements: 4x 617-960, 1427-6000 MHz
WiFi Elements: 2x 2.4/5.0/7.1GHz
Auxiliary radiator connection: Radiator dependent (optional for FM/DAB+)

Peak gain: Isotropic*:

4G/5G Elements:
5dBi (617-960MHz)
8dBi (1427-4200MHz)
9dBi (4900-6000MHz)

WiFi elements:
7dBi (2396-2485MHz)
11dBi (4900-7200MHz)
(For further technical data, see additional pictures)

GPS/GNSS data:
Frequency range (MHz): 1562-1612
Gain: LNA: 26dB
Polarisation: Right-hand circular
Operating voltage: 3-5V DC (powered via coax)
Current: Typically <20mA

Dimensions:
Overall height: 82mm, Overall length: 253mm, Width: 142mm.

Temperature range: -40° / +80°C
Material: ASA, silicone rubber, aluminium alloy
Protection class: IP69K
Drill hole: 19-20 mm
Cable type: FR RG174 (UN ECE R 118 Compliant), diameter: 2.9 mm, length: 30 cm

Connections to antenna:
4 x SMA male (m) [4G/5G].
2 x SMA socket (f) [WIFI / WLAN]
1 x FME socket (f) [GPS/GNSS]
1 x FME connector (m) for optional VHF/DAB+

Colour: black

Cable set:
The antenna is supplied with a cable set consisting of 7 cables for the above routers, each 1.5 metres long:
4 x 5G/LTE with SMA connector
2 x WLAN with SMA RP connector
1 x GPS with SMA connector

Note: If you want to connect the antenna directly to a router with SMA connectors, you will also need the following adapters:
2 x PAN-SAM-101 (for Wlan)
1 x PAN-SAM-102 (for GPS)

This antenna is available in the following versions:

PAN-ANT630B: Black with cable set in 3.0 m
PAN-ANT615B: Black with cable set in 1.5 m
PAN-ANT630: White with cable set in 3.0 m
PAN-ANT615: White with cable set in 1.5 m

Special feature:

The special feature of this antenna is that the antenna has an 8th connection for combinations of FM; DAB+. With an optional radiator/amplifier/cable kit, this connection can be used for the functions mentioned. In this case, the antenna must then have a ground plane, i.e. be mounted on metal. If the roof is made of a non-conductive material, the following antenna supports can be used: 15903, 15904 or 15906. Please order separately.

Supplementary set for VHF and DAB+
PAN-ANT285 (5.0m cable length)
PAN-ANT287 (7.5m cable length)
PAN-ANT2810 (10.0m cable length)
Please order separately.



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Original item number: GPSD4-6-60-D from the GPS[X]D4[X]-6-60[-X] series.

Panorama antenna suitable for all LTE and 5G routers.

Especially for RUTX50, RUTX14, RUTX12, but also downward compatible to RutX11, Rut956, Rut955, Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers.

The antenna is characterised by 4 receiving elements for LTE/5G. Thus, it supports especially the fast 5G routers, which allow to use 2 modems in parallel and thus to double the transmission speed.

Technical data:

GPS/GNSS Elements: 1x 1562-1612 MHz
4G/5G Elements: 4x 617-960, 1427-6000 MHz
WiFi Elements: 2x 2.4/5.0/7.1GHz
Auxiliary radiator connection: Radiator dependent (optional for FM/DAB+)

Peak gain: Isotropic*:

4G/5G Elements:
5dBi (617-960MHz)
8dBi (1427-4200MHz)
9dBi (4900-6000MHz)

WiFi elements:
7dBi (2396-2485MHz)
11dBi (4900-7200MHz)
(For further technical data, see additional pictures)

GPS/GNSS data:
Frequency range (MHz): 1562-1612
Gain: LNA: 26dB
Polarisation: Right-hand circular
Operating voltage: 3-5V DC (powered via coax)
Current: Typically <20mA

Dimensions:

Overall height: 82 mm
Overall length: 253 mm
Width: 142 mm

Temperature range: -40° / +80°C
Material: ASA, silicone rubber, aluminium alloy
Protection class: IP69K
Drill hole: 19-20 mm
Cable type: FR RG174 (UN ECE R 118 Compliant)
Diameter: 2.9 mm
Length: 30 cm

Connections to antenna:

4 x SMA male (m) [4G/5G]
2 x SMA socket (f) [WIFI / WLAN]
1 x FME socket (f) [GPS/GNSS]
1 x FME connector (m) for optional FM/DAB+

Colour: white

Cable set:
The antenna is supplied with a cable set consisting of 7 cables for the above routers in the length of 3 metres each:
4 x 5G/LTE with SMA connector
2 x WLAN with SMA RP connector
1 x GPS with SMA connector

Note: If you want to connect the antenna directly to a router with SMA connectors, you will also need the following adapters:
2 x PAN-SAM-101 (for Wlan)
1 x PAN-SAM-102 (for GPS)

This antenna is available in the following versions:

PAN-ANT630B: Black with cable set in 3.0 m
PAN-ANT615B: Black with cable set in 1.5 m
PAN-ANT630: White with cable set in 3.0 m
PAN-ANT615: White with cable set in 1.5 m

Special feature:

The special feature of this antenna is that the antenna has an 8th connection for combinations of FM; DAB+. With an optional radiator/amplifier/cable kit, this connection can be used for the functions mentioned. In this case, the antenna must then have a ground plane, i.e. be mounted on metal. If the roof is made of a non-conductive material, the following antenna supports can be used: 15903, 15904 or 15906. Please order separately.

Supplementary set for VHF and DAB+
PAN-ANT285 (5.0m cable length)
PAN-ANT287 (7.5m cable length)
PAN-ANT2810 (10.0m cable length)
Please order separately.



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Original item number: GPSD4-6-60-D from the GPS[X]D4[X]-6-60[-X] series.

Panorama antenna suitable for all LTE and 5G routers.

Especially for RUTX50, RUTX14, RUTX12, but also downward compatible to RutX11, Rut956, Rut955, Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers.

The antenna is characterised by 4 receiving elements for LTE/5G. Thus, it supports especially the fast 5G routers, which allow to use 2 modems in parallel and thus to double the transmission speed.

Technical data:

GPS/GNSS Elements: 1x 1562-1612 MHz
4G/5G Elements: 4x 617-960, 1427-6000 MHz
WiFi Elements: 2x 2.4/5.0/7.1GHz
Auxiliary radiator connection: Radiator dependent (optional for FM/DAB+)

Peak gain: Isotropic*:

4G/5G Elements:
5dBi (617-960MHz)
8dBi (1427-4200MHz)
9dBi (4900-6000MHz)

WiFi elements:
7dBi (2396-2485MHz)
11dBi (4900-7200MHz)
(For further technical data, see additional pictures)

GPS/GNSS data:
Frequency range (MHz): 1562-1612
Gain: LNA: 26dB
Polarisation: Right-hand circular
Operating voltage: 3-5V DC (powered via coax)
Current: Typically <20mA

Dimensions:

Overall height: 82 mm
Overall length: 253 mm
Width: 142 mm

Temperature range: -40° / +80°C
Material: ASA, silicone rubber, aluminium alloy
Protection class: IP69K
Drill hole: 19-20 mm
Cable type: FR RG174 (UN ECE R 118 Compliant)
Diameter: 2.9 mm
Length: 30 cm

Connections to antenna:

4 x SMA male (m) [4G/5G]
2 x SMA socket (f) [WIFI / WLAN]
1 x FME socket (f) [GPS/GNSS]
1 x FME connector (m) for optional VHF/DAB+

Colour: black

Cable set:
The antenna is supplied with a cable set consisting of 7 cables for the above routers in the length of 3 metres each:
4 x 5G/LTE with SMA connector
2 x WLAN with SMA RP connector
1 x GPS with SMA connector

Note: If you want to connect the antenna directly to a router with SMA connectors, you will also need the following adapters:
2 x PAN-SAM-101 (for Wlan)
1 x PAN-SAM-102 (for GPS)

This antenna is available in the following versions:

PAN-ANT630B: Black with cable set in 3.0 m
PAN-ANT615B: Black with cable set in 1.5 m
PAN-ANT630: White with cable set in 3.0 m
PAN-ANT615: White with cable set in 1.5 m
Special feature: The special feature of this antenna is that the antenna has an 8th connection for combinations of FM; DAB+. With an optional radiator/amplifier/cable kit, this connection can be used for the functions mentioned. In this case, the antenna must then have a ground plane, i.e. be mounted on metal. If the roof is made of a non-conductive material, the following antenna supports can be used: 15903, 15904 or 15906. Please order separately. Supplementary set for VHF and DAB+ PAN-ANT285 (5.0m cable length) PAN-ANT287 (7.5m cable length) PAN-ANT2810 (10.0m cable length) Please order separately.

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Original item number: GPSD4-6-60-D from the GPS[X]D4[X]-6-60[-X] series.

Panorama antenna suitable for all LTE and 5G routers.

Especially for RUTX50, RUTX14, RUTX12, but also downward compatible to RutX11, Rut956, Rut955, Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers.

The antenna is characterised by 4 receiving elements for LTE/5G. Thus, it supports especially the fast 5G routers, which allow to use 2 modems in parallel and thus to double the transmission speed.

Technical data:

GPS/GNSS Elements: 1x 1562-1612 MHz
4G/5G Elements: 4x 617-960, 1427-6000 MHz
WiFi Elements: 2x 2.4/5.0/7.1GHz
Auxiliary radiator connection: Radiator dependent (optional for FM/DAB+)

Peak gain: Isotropic*:

4G/5G Elements:
5dBi (617-960MHz)
8dBi (1427-4200MHz)
9dBi (4900-6000MHz)

WiFi elements:
7dBi (2396-2485MHz)
11dBi (4900-7200MHz)
(For further technical data, see additional pictures)

GPS/GNSS data:
Frequency range (MHz): 1562-1612
Gain: LNA: 26dB
Polarisation: Right-hand circular
Operating voltage: 3-5V DC (powered via coax)
Current: Typically <20mA

Dimensions:
Overall height: 82mm, Overall length: 253mm, Width: 142mm.

Temperature range: -40° / +80°C
Material: ASA, silicone rubber, aluminium alloy
Protection class: IP69K
Drill hole: 19-20 mm
Cable type: FR RG174 (UN ECE R 118 Compliant), diameter: 2.9 mm, length: 30 cm

Connections to antenna:
4 x SMA male (m) [4G/5G].
2 x SMA socket (f) [WIFI / WLAN]
1 x FME socket (f) [GPS/GNSS]
1 x FME connector (m) for optional VHF/DAB+

Colour: black

Cable set:
The antenna is supplied with a cable set consisting of 7 cables for the above routers, each 1.5 metres long:
4 x 5G/LTE with SMA connector
2 x WLAN with SMA RP connector
1 x GPS with SMA connector

Note: If you want to connect the antenna directly to a router with SMA connectors, you will also need the following adapters:
2 x PAN-SAM-101 (for Wlan)
1 x PAN-SAM-102 (for GPS)

This antenna is available in the following versions:

PAN-ANT630B: Black with cable set in 3.0 m
PAN-ANT615B: Black with cable set in 1.5 m
PAN-ANT630: White with cable set in 3.0 m
PAN-ANT615: White with cable set in 1.5 m

Special feature: The special feature of this antenna is that the antenna has an 8th connection for combinations of FM; DAB+. With an optional radiator/amplifier/cable kit, this connection can be used for the functions mentioned. In this case, the antenna must then have a ground plane, i.e. be mounted on metal. If the roof is made of a non-conductive material, the following antenna supports can be used: 15903, 15904 or 15906. Please order separately. Supplementary set for VHF and DAB+ PAN-ANT285 (5.0m cable length) PAN-ANT287 (7.5m cable length) PAN-ANT2810 (10.0m cable length) Please order separately.

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

1 Antenne für alle Funktionen!
Perfekter UKW und DAB+ Empfang mit 41 cm Strahler, sowie Internet über UMTS, LTE und 5G oder WLAN. GPS/GNSS Funktion für Navigation oder Router. Die Antenne ist jetzt schon in der Lage für 5G Empfang! Auch wenn sie jetzt noch einen LTE Router betreiben ist bei Neuanschaffung eines 5G Routers die Antenne darauf vorbereitet.

Panorama Antenne passend für alle LTE und 5G Router.

Die Besonderheit bei dieser Antenne ist, dass die Antenne über einen 6. Anschluss für Kombinationen aus UKW; DAB+ verfügt. Durch das mitgelieferte Strahler-/Verstärker-/Kabelkit kann dieser Anschluss für die genannten Funktionen genutzt werden. In diesem Fall muss die Antenne dann ein Gegenpol bekommen, d.h. auf Metall montiert werden. Wir liefern dazu eine Edelstahlplatte, weiß pulverlackiert, 40x40 cm mit.

Insbesondere für RUTX14, RUTX12, aber auch abwärtskompatibel zu RutX11, Rut956, Rut955, Rut951, Rut950, Rut 360, CamperNet und alle anderen 4G und 5G Routern.

Die Antenne zeichnet sich aus durch 2 Empfangselemente für LTE/5G und WLAN, sowie ein Element für GPS/Glonass und Element für die o.g. Radio- bzw. Fernsehzusatzanwendungen.

Technische Daten:

Farbe: schwarz

Frequenz: Element 1: 1562-1612MHz
Element 2 & 3: 698-960MHz, 1710-2170MHz, 2500-3800MHz
Element 4 - 7: 2 x 2,4/5,0/7,1 GHz

Gewinn:
Element 1: 26dB
Element 2 & 3: 5dBi (617-960MHz), 8dBi (1710-3800MHz), 9dBi (4900-6000MHz)
Element 4 - 7: 5dBi (2396-2485MHz), 11dBi (4900-7200MHz)
Polarisation: Vertikal
Strahlungsmuster: Omni-Direktional
Widerstand: 50 OHM
Max. Eingangsleistung: 10W/ Hauptstrahler 60W

Befestigung: 1-Loch Montage 18mm

Maße: Höhe ohne Strahler 90mm/ Länge 243mm/ Breite 63mm Material: ASA schwarz

Kabellänge 300mm
Stecker:
2 x SMA Stecker (m) [4G/5G]
2 x SMA Stecker (f) [WIFI]
FME Buchse (f) [GPS/GNSS]
Strahler: FME (m)

Kabelsatz:
Die Antenne wird mit einem aus 5 Kabeln bestehenden Kabelsatz für die o.g. Router in der Länge von je 1,5 Meter ausgeliefert:
2 x LTE mit SMA Stecker
2 x WLAN mit SMA RP Stecker
1 x GPS mit SMA Stecker

Lieferumfang:

- Panoramaantenne PAN-ANT215B mit Kabelsatz 1,5 m
- PAN-ANT287 Ergänzungssatz UKW/DAB+ mit 7,5 m Kabel
- UNI-3L750, GPS Kabelsatz für Navigation
- 15903w, Edelstahlplatte, weiß pulverbeschichtet, 40x40 cm
- Knickgelenk 4615_01
Hinweis: Der GPS Anschluss der Antenne kann dann wahlweise für 1 Navigation oder für die GPS Funktion eines Routers verwendet werden.

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke: ATTB (Radioergänzung UKW/DAB+)
Hersteller: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

1 Antenne für alle Funktionen!
Perfekter UKW und DAB+ Empfang mit 41 cm Strahler, sowie Internet über UMTS, LTE und 5G oder WLAN. GPS/GNSS Funktion für Navigation oder Router. Die Antenne ist jetzt schon in der Lage für 5G Empfang! Auch wenn sie jetzt noch einen LTE Router betreiben ist bei Neuanschaffung eines 5G Routers die Antenne darauf vorbereitet.

Panorama Antenne passend für alle LTE und 5G Router.

Die Besonderheit bei dieser Antenne ist, dass die Antenne über einen 6. Anschluss für Kombinationen aus UKW; DAB+ verfügt. Durch das mitgelieferte Strahler-/Verstärker-/Kabelkit kann dieser Anschluss für die genannten Funktionen genutzt werden. In diesem Fall muss die Antenne dann ein Gegenpol bekommen, d.h. auf Metall montiert werden. Wir liefern dazu eine Edelstahlplatte, weiß pulverlackiert, 40x40 cm mit.

Insbesondere für RUTX14, RUTX12, aber auch abwärtskompatibel zu RutX11, Rut956, Rut955, Rut951, Rut950, Rut 360, CamperNet und alle anderen 4G und 5G Routern.

Die Antenne zeichnet sich aus durch 2 Empfangselemente für LTE/5G und WLAN, sowie ein Element für GPS/Glonass und Element für die o.g. Radio- bzw. Fernsehzusatzanwendungen.

Technische Daten:

Farbe: schwarz

Frequenz: Element 1: 1562-1612MHz
Element 2 & 3: 698-960MHz, 1710-2170MHz, 2500-3800MHz
Element 4 - 7: 2 x 2,4/5,0/7,1 GHz

Gewinn:
Element 1: 26dB
Element 2 & 3: 5dBi (617-960MHz), 8dBi (1710-3800MHz), 9dBi (4900-6000MHz)
Element 4 - 7: 5dBi (2396-2485MHz), 11dBi (4900-7200MHz)
Polarisation: Vertikal
Strahlungsmuster: Omni-Direktional
Widerstand: 50 OHM
Max. Eingangsleistung: 10W/ Hauptstrahler 60W

Befestigung: 1-Loch Montage 18mm

Maße: Höhe ohne Strahler 90mm/ Länge 243mm/ Breite 63mm Material: ASA schwarz

Kabellänge 300mm
Stecker:
2 x SMA Stecker (m) [4G/5G]
2 x SMA Stecker (f) [WIFI]
FME Buchse (f) [GPS/GNSS]
Strahler: FME (m)

Kabelsatz:
Die Antenne wird mit einem aus 5 Kabeln bestehenden Kabelsatz für die o.g. Router in der Länge von je 1,5 Meter ausgeliefert:
2 x LTE mit SMA Stecker
2 x WLAN mit SMA RP Stecker
1 x GPS mit SMA Stecker

Lieferumfang:

- Panoramaantenne PAN-ANT215B mit Kabelsatz 1,5 m
- PAN-ANT287 Ergänzungssatz UKW/DAB+ mit 7,5 m Kabel
- UNI-3L750, GPS Kabelsatz für Navigation
- 15903w, Edelstahlplatte, weiß pulverbeschichtet, 40x40 cm
- Knickgelenk 4615_01
Hinweis: Der GPS Anschluss der Antenne kann dann wahlweise für 1 Navigation oder für die GPS Funktion eines Routers verwendet werden.

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke: ATTB (Radioergänzung UKW/DAB+)
Hersteller: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

One antenna for all functions! Mounted on stainless steel antenna support, powder-coated white! Perfect FM and DAB+ reception with 41 cm radiator, as well as Internet via UMTS, LTE and 5G or WLAN. GPS/GNSS function for navigation or router. The antenna is already capable of 5G reception! Even if you are still using an LTE router, the antenna is prepared for 5G reception when you purchase a new router. Panorama antenna suitable for all LTE and 5G routers. The special feature of this antenna is that it has a 6th connection for combinations of FM; DAB+. With the supplied radiator/amplifier/cable kit, this connection can be used for the functions mentioned. In this case, the antenna must then be given a counter pole, i.e. mounted on metal. We supply a stainless steel plate, powder-coated white, 40x40 cm for this purpose. Especially for RUTX50, RUTX14, RUTX12, but also backwards compatible to RutX11, Rut956, Rut955, Rut951, Rut950, Rut 360, CamperNet and all other 4G and 5G routers. The antenna features 4 receiving elements for LTE/5G and WLAN, as well as one element for GPS/Glonass and element for the above-mentioned radio UWK/DAB+ application.

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke: ATTB (Radioergänzung UKW/DAB+)
Hersteller: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Perfekter UKW und DAB+ Empfang mit 41 cm Strahler, sowie Internet über UMTS, LTE und 5G oder WLAN. GPS/GNSS Funktion für Navigation oder Router. Die Antenne ist jetzt schon in der Lage für 5G Empfang! Auch wenn sie jetzt noch einen LTE Router betreiben ist bei Neuanschaffung eines 5G Routers die Antenne darauf vorbereitet.

Panorama Antenne passend für alle LTE und 5G Router, insbesondere für RutC50, aber auch abwärtskompatibel.

Die Besonderheit bei dieser Antenne ist, dass die Antenne über einen 6. Anschluss für Kombinationen aus UKW; DAB+ verfügt. Durch das mitgelieferte Strahler-/Verstärker-/Kabelkit kann dieser Anschluss für die genannten Funktionen genutzt werden. In diesem Fall muss die Antenne dann ein Gegenpol bekommen, d.h. auf Metall montiert werden. Wir liefern dazu eine Edelstahlplatte, weiß pulverlackiert, 40x40 cm mit.

Die Antenne zeichnet sich aus durch 4 Empfangselemente für LTE/5G und 3x WLAN, sowie ein Element für GPS/Glonass und Element für die o.g. Radio UWK/DAB+ Anwendung.

Technische Daten:

Farbe: weiß

Frequenz: Element 1: 1562-1612MHz
Element 2 & 3: 698-960MHz, 1710-2170MHz, 2500-3800MHz
Element 4 - 7: 2 x 2,4/5,0/7,1 GHz

Gewinn:
Element 1: 26dB
Element 2 & 3: 5dBi (617-960MHz), 8dBi (1710-3800MHz), 9dBi (4900-6000MHz)
Element 4 - 7: 5dBi (2396-2485MHz), 11dBi (4900-7200MHz)
Polarisation: Vertikal
Strahlungsmuster: Omni-Direktional
Widerstand: 50 OHM
Max. Eingangsleistung: 10W/ Hauptstrahler 60W

Befestigung: 1-Loch Montage 18mm
Maße: Höhe ohne Strahler 90mm/ Länge 243mm/ Breite 63mm Material: ASA schwarz

Kabellänge 300mm
Stecker:
4 x SMA Stecker (m) [4G/5G]
3 x SMA Stecker (f) [WIFI]
FME Buchse (f) [GPS/GNSS]
Strahler: FME (m)

Kabelsatz:
Die Antenne wird mit einem aus 7 Kabeln bestehenden Kabelsatz für die o.g. Router in der Länge von je 3,0 Meter ausgeliefert:
4 x LTE mit SMA Stecker
2 x WLAN mit SMA RP Stecker
1 x GPS mit SMA Stecker

Lieferumfang:

- Panoramaantenne PAN-ANT830 mit Kabelsatz 3,0 m
- PAN-ANT2810 Ergänzungssatz UKW/DAB+ mit 10 m Kabel
- UNI-3L1000, GPS Kabelsatz für Navigation
- Adapter 8441 für GPS Nutzung der Antenne für die Navigation
- 15904w, Edelstahlträgerplatte, weiß pulverbeschichtet, 36x36 cm, mit Edelstahlwinkeln, weiß pulverbeschichtet, Verteilerdose 15934 vorgebohrt für den Schutz des Antennenfußes und der Kabelverbindungen.
- Knickgelenk 4615_01
Hinweis: Der GPS Anschluss der Antenne kann dann wahlweise für 1 Navigation oder für die GPS Funktion eines Routers verwendet werden.

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Panorama Antennas
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke: ATTB (Radioergänzung UKW/DAB+)
Hersteller: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************