DIETZ Antennenplatten

Powder-coated white stainless steel plate (RAL9003) for mounting antennas on camper vans or special vehicles without a metal roof. The plate forms the counter pole necessary for lamda/quarter radiators so that 16 V antennas or shark antennas function optimally. The plate already has a 20 mm hole in the centre for mounting all common antennas. The material thickness is 1 mm. The corners are deburred.

The plate is to be fixed with an appropriate adhesive or screws. Fixing material is not included.

The delivery does not include the antenna!

Non-binding tip for a good adhesive:
DEKASYL MS-5 from Dekalin.



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 7,5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7,5 m, Fakra female - SMB female, for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T0L750UNI



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height is not important, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 3,5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 5 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height is not important, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 5 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 7,5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7,5 m, Fakra female - SMB female, for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T0L750UNI



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 10 m, Fakra female - SMB female , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T0L1000UNI



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height is not important, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 7.5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7.5 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T0L750UNI



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Stainless steel plate for mounting antennas on mobile homes or special vehicles without metal roof. The plate forms the counter pole necessary for Lamda/quarter radiators, so that 16 V antennas or Kombiflex antennas work optimally. The plate already has a 20 mm hole in the center for mounting all common antennas.
>br> The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery also includes two stainless steel brackets, which are already pre-drilled for 3 screws each. There are no holes in the stainless steel plate yet, so that you can individually determine the height of the antenna support.
>br> Furthermore, the junction box 15933 is included in the delivery. It already has a hole of 35 mm on the adhesive side, so that the antenna base can be fixed optimally on the metal plate.
>br> For bonding work we recommend the optional DEKALIN Adhesive Set DN-SetMS5.

For cable feed-through, we recommend the suitable bushing from Büttner Elektronik (Art. No. 15907).
>br> The stainless steel plate is delivered without antenna. We would be pleased to advise you on all questions concerning antenna technology!

Scope of delivery:

- Antenna support stainless steel 360*360*1,5 mm with a 20 mm bore
- 2 stainless steel angles 360*50*35 mm
- 6 stainless steel screws with nuts, M5
- 10 stainless steel screws cross recess for distribution box
- Junction box 15933 pre-drilled, d=35 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Stainless steel plate for mounting antennas on mobile homes or special vehicles without metal roof. The plate forms the counter pole necessary for Lamda/quarter radiators, so that 16 V antennas or Kombiflex antennas work optimally. The plate already has a 20 mm hole in the center for mounting all common antennas.
>br> The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery also includes two stainless steel brackets, which are already pre-drilled for 3 screws each. There are no holes in the stainless steel plate yet, so that you can individually determine the height of the antenna support.
>br> Furthermore, the junction box 15933 is included in the delivery. It already has a hole of 35 mm on the adhesive side, so that the antenna base can be fixed optimally on the metal plate.
>br> For bonding work we recommend the optional DEKALIN Adhesive Set DN-SetMS5.

For cable feed-through, we recommend the suitable bushing from Büttner Elektronik (Art. No. 15907).
>br> The stainless steel plate is delivered without antenna. We would be pleased to advise you on all questions concerning antenna technology!

Scope of delivery:

- Antenna support stainless steel 360*360*1,5 mm with a 20 mm bore
- 2 stainless steel angles 360*50*35 mm
- 6 stainless steel screws with nuts, M5
- 10 stainless steel screws cross recess for distribution box
- Junction box 15933 pre-drilled, d=35 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Stainless steel plate for mounting antennas on mobile homes or special vehicles without and with metal roof. The plate forms the counter pole necessary for Lamda/quarter radiators, so that 16 V antennas or Kombiflex antennas work optimally. The plate already has a 20 mm hole in the center for mounting all common antennas.
>br> The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery also includes two stainless steel brackets, which are already pre-drilled for 2 screws each.
>br> Furthermore, the junction box 15934 is included in the delivery. It already has a hole of 35 mm on the adhesive side, so that the antenna base can be fixed optimally on the metal plate.
>br> For bonding work we recommend the optional DEKALIN Adhesive Set DN-SetMS5.

For cable feed-through, we recommend the suitable bushing from Büttner Elektronik (Art. No. 15907).
>br> The stainless steel plate is delivered without antenna. We would be pleased to advise you on all questions concerning antenna technology!

Scope of delivery:

- Antenna support stainless steel 370*320*1,5 mm with a 20 mm bore
- 2 stainless steel angles 210*50*35 mm
- 6 stainless steel screws with nuts, M5
- 10 stainless steel screws cross recess for distribution box
- Junction box 15934 pre-drilled, d=35 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Stainless steel plate for mounting antennas on mobile homes or special vehicles without metal roof. The plate is made for the 5G DIETZ antenna DZ_1030. The plate already has a 28 mm hole in the center for mounting all common antennas.
>br> The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery also includes two stainless steel brackets, which are already pre-drilled for 3 screws each. There are no holes in the stainless steel plate yet, so that you can individually determine the height of the antenna support.
>br> Furthermore, the junction box 15934 is included in the delivery. It already has a hole of 48 mm on the adhesive side, so that the antenna base can be fixed optimally on the metal plate.
>br> For bonding work we recommend the optional DEKALIN Adhesive Set DN-SetMS5.

The stainless steel plate is delivered without antenna. We would be pleased to advise you on all questions concerning antenna technology!

Scope of delivery:

- Antenna support stainless steel 250*210*1,5 mm with a 28 mm bore
- 2 stainless steel angles 210*50*35 mm
- 6 stainless steel screws with nuts, M5
- 10 stainless steel screws cross recess for distribution box
- Junction box 15934 pre-drilled, d=48 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Stainless steel plate for mounting antennas on mobile homes or special vehicles without and with metal roof. The plate forms the counter pole necessary for Lamda/quarter radiators, so that 16 V antennas or Kombiflex antennas work optimally. The plate already has a 20 mm hole in the center for mounting all common antennas.
>br> The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery also includes two stainless steel brackets, which are already pre-drilled for 2 screws each.
>br> Furthermore, the junction box 15934 is included in the delivery. It already has a hole of 35 mm on the adhesive side, so that the antenna base can be fixed optimally on the metal plate.
>br> For bonding work we recommend the optional DEKALIN Adhesive Set DN-SetMS5.

For cable feed-through, we recommend the suitable bushing from Büttner Elektronik (Art. No. 15907).
>br> The stainless steel plate is delivered without antenna. We would be pleased to advise you on all questions concerning antenna technology!

Scope of delivery:

- Antenna support stainless steel 370*320*1,5 mm with a 20 mm bore
- 2 stainless steel angles 210*50*35 mm
- 6 stainless steel screws with nuts, M5
- 10 stainless steel screws cross recess for distribution box
- Junction box 15934 pre-drilled, d=35 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics and the antenna radiators are perfectly matched to each other. For vehicles where the height is not important, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 10 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T0L1000UNI



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 3, stainless steel 400*400*1 mm, white powder coated RAL 9003
central hole d= 20 mm
Lowloss cable 7,5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7,5 m, Fakra female - SMB female, for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23 cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T3L750UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where height is not an issue, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 3, stainless steel 400*400*1 mm, white powder coated RAL 9003
Central hole d= 20 mm
Lowloss cable 7.5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7,5 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41 cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T3L750UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 3, stainless steel 400*400*1 mm, white powder coated RAL 9003
central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 10 m, Fakra female - SMB female , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T3L1000UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where height is not an issue, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 3, stainless steel 400*400*1 mm, white powder coated RAL 9003
Central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 10 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41 cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T3L1000UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Aluminum plate powder-coated white (RAL9003) for mounting antennas on motorhomes or special vehicles without a metal roof. The plate forms the counter pole necessary for lamda/quarter radiators so that 16 V antennas or Kombiflex antennas function optimally. The plate already has a 20 mm and a 22 mm hole in the centre for mounting all common antennas.
The second hole is for the second antenna, which is especially needed for 5G/LTE/WLAN routers, such as Campernet or Teltronika or other routers with Mimo technology.

The material thickness is 1.5 mm. The corners are deburred.

The scope of delivery includes two stainless steel brackets, which are already pre-drilled for 3 screws each.

Furthermore, two junction boxes 15934 are already glued to the underside of the antenna support. This protects the antenna's cable connections from moisture.

For the bonding work we recommend the optional DEKALIN bonding set DN-SetMS5.

For cable entry we recommend a combination of the optional junction box 15934 with the roof bushings 15921/15922 or 15923. Please note the Youtube video linked to the articles 15921/15922 and 15923 and here:
https://www.youtube.com/watch?v=_07czJ_uubs

The stainless steel plate is delivered without antennas. We will be happy to advise you on all questions regarding antenna technology!

Scope of delivery:
- Antenna support stainless steel 570*360*1,5 mm with two holes 20/22 mm, height 70 mm, white powder coated (RAL9003)
- 2 stainless steel brackets 360*50*35 mm, powder-coated white (RAL9003)
- 6 stainless steel screws with nuts, M5
- 20 stainless steel screws cross recess for junction box
- Junction box 15934 pre-drilled, d=35 mm
- Junction box 15934 pre-drilled, d=35 mm

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 4, stainless steel 360*360*1,5 mm, painted white central hole d= 20 mm
Lowloss cable 7,5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7,5 m, Fakra female - SMB female, for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T4L750UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where height is not an issue, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 4, stainless steel 360*360*1.5 mm, painted white
Central hole d= 20 mm
Lowloss cable 7.5 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 7,5 m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41 cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G
Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T4L750UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

The antenna A10 is, according to our tests, at the moment the best antenna for optimal radio reception in camper van. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where the height does not matter, we always recommend the 23 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 4, stainless steel 360*360*1,5 mm, painted white central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 10m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 23cm
- DAB+ reception, active and low noise in the BAND 3
- VHF/FM/AM reception, active and low noise
- 12 Volt power supply via external cable 0,75 mm2 (no phantom power possible)
- low installation depth (approx. 15 mm)
- gain: FM: 9 dB
- Gain: DAB+: 14 dB
- power supply: 12 Volt, 30mA
- cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, gray, code G

Low-Loss cables (...low loss cables) are the cables with the best electrical properties for lossless transmission of antenna signals. Our lowloss cable series has best conductance values and therefore lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0,25mm), for the shield (42*d=0,11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra plugs and sockets from Rosenberger are used. They have excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminum foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T4L1000UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

According to our tests, the A10 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. For vehicles where height is not an issue, we always recommend the 41 cm antenna radiator. You will be thrilled!

Delivery contents:

Antenna A10
Antenna support 4, stainless steel 360*360*1.5 mm, painted white
Central hole d= 20 mm
Lowloss cable 10 m, Fakra socket - Fakra socket, for VHF
Adapter 1: Fakra plug - DIN plug
Adapter 2: Fakra plug - ISO plug

Lowloss cable 10m, Fakra socket - SMB socket , for DAB+

Roof antenna with the following features:
- 16V antenna with long rod, length approx. 41 cm
- DAB+ reception, active and low noise in BAND 3
- VHF/FM/AM reception, active and low-noise
- 12 V power supply via external cable 0.75 mm2 (phantom powering not possible)
- Low installation depth (approx. 15 mm)
- Gain: FM: 9 dB
- Gain: DAB+: 14 dB
- Power supply: 12 volts, 30mA
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Note: This set replaces the previous sets:

A1T4L1000UNI


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************