Antenna support, roof bonnet for 1 motorhome antenna 38,4x38cm/ metal plate 30x3

Active radio distributor for the vehicle or house interior with the following functions and features:
- Distribution of analogue radio and DAB, DAB+ frequency ranges
- Improvement of the reception quality of passive radio antennas
- Simple and quick mounting
- Cable type: RG 174
- Services: AM/FM, DAB, DAB+
- Connectors: SMB(f), DIN 41585(f), DIN 41585(m)

Note:
- The product is intended for typical roof/fender antennas.
- Do not use with integrated glass or active roof antennas

Additional information:
- Mounting: adhesive/screw mounting
- Additional info: Crossover
- Category/Special feature: Active crossover for passive single-cable solution

Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. With a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551, as any phantom voltage from the radio is not passed through.

The best results are achieved when the splitter is combined with a passive FM/UKW/DAB antenna: - 16 V antenna: ATTB_2116_01 - Flex antenna with adjustable rod from 10-115 degrees: ATTB_3940_01 - Shark/shark antenna: ATTB_3759_01 These antennas always have a piece of cable 40cm with a Fakra socket. You can then use a possibly existing Fakra cable or bring the signal into the dashboard with the extension cable Dietz: 8479 (Fakra plug - DIN plug, length 5 metres). Connect the splitter there. If the radio has an ISO antenna connection for FM, you will also need the adapter, Dietz 8300.

Original article number: 4726.01

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Highest quality and reliability "Made in Germany".

The ATTB 2118.04 roof antenna is an antenna developed and manufactured by Antennentechnik Bad Blankenburg for retrofitting vehicles. ATTB specialises in radio-based networking solutions for various industries and applications. With its own research, development and production, ATTB has stood for the highest quality and reliability "Made in Germany" since 1919.

We drive connectivity: networking without compromise

The ATTB Kombiflex roof antenna 2118.04 establishes reliable, high-performance radio connections in the field of broadcasting and is suitable for mobile outdoor use. It undergoes the most stringent testing processes, is manufactured in Germany from high-quality components and offers first-class transmission or reception performance - even under the most difficult conditions.

Frequency bands and communication services

The ATTB 2118.04 multifunction antenna covers several frequency bands and thus communication services. In the broadcasting range, AM (0.15 - 1.71 MHz), FM (87.5 - 108 MHz) and DAB+ (DAB+ BIII, 174 - 230 MHz; DAB+ L-Band, 1452 - 1492 MHz) can be received.

Special features and characteristics

- Active and low-noise DAB reception in band III
- Passive DAB reception in the L-band range
- Active broadcast reception for LMK/UKW
- Active antenna with separate signal routing
- 12V power supply for the amplifier either via DIN plug-in sleeve or via inner conductor of the cable connections (only one connection recommended)
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort (only one mounting hole for 2 functions)
- Cable type: RG 174
- Services: AM/FM, DAB+
- Connectors: FAKRA(m) G, FAKRA(m) B

Dimensions:
- Width: 56 mm
- Height: 270 mm
- Length: 45 mm
- Weight: 0.241 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Excellent roof antenna with the following features:
-flat angle of only 70 degrees, also ideal for front mounting if roof is not exactly horizontal.
- Antenna with short rod, length approx. 23 cm, in 16 V design.
- DAB+ reception 174-237 MHz & 1452-1492 MHz
- VHF/FM reception 87-108 MHz
- 12 V external power supply (no phantom powering possible)
- Low installation depth approx. 16 mm
- Gain: FM: 7 dB
- Gain: DAB+: 12dB
- Power supply: 12 volts, 100 mA
- Temperature range (-40 degrees to + 85 degrees Celsius)
- Impedance: 50 Ohm (DAB+); 75-150 Ohm (FM)
- Cable to antenna:
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey , code G

Note: This antenna is delivered without cable!

Recommended LOWLOSS extension cable:

9552: 5 metre lowloss cable for VHF/FM (with Fakra socket and DIN plug) and 5 metre lowloss cable for DAB+ (with Fakra socket and SMB socket.
9572: 7.5 metre lowloss cable for VHF/FM (with Fakra socket and DIN plug) and 7.5 metre lowloss cable for DAB+ (with Fakra socket and SMB socket).

or UNI LOWLOSS sets with different connectors for FM. With this cable set, 99% of the car radios on the market can be connected with our antennas. The sets consist of 2 LowLoss antenna cables with Fakra colour coding for VHF and DAB+.

- Lowloss cable Fakra socket - Fakra socket, beige
- Lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey
Adapter for VHF:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

Variants:
UNI-2L500: Set with 5 m cable length
UNI-2L750: Set with 7,5 m cable length
UNI-2L1000: Set with 10,0 m cable length

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punching and bending technology by Rosenberger (Fakra-SF).

Technical data of the low loss cable:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional
tinned copper braiding
Outer diameter: 3.6 mm

This antenna is also available with high quality LowLoss antenna extensions, (radio side DIN plug for FM and SMB socket for DAB+):

DZ_2113_52 with 2 extension cables 5.0 m (DIN plug/SMB socket).
DZ_2113_72 with 2 extension cables 7.5 m (DIN plug/SMB socket)
DZ_2113_L500 with 2 extension cables 5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L750 with 2 extension cables 7.5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L1000 with 2 extension cables 10 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************