ATTB DAB+ -Splitter

Active radio distributor for the vehicle or house interior with the following functions and features:
- Distribution of analogue radio and DAB, DAB+ frequency ranges
- Improvement of the reception quality of passive radio antennas
- Simple and quick mounting
- Cable type: RG 174
- Services: AM/FM, DAB, DAB+
- Connectors: SMB(f), DIN 41585(f), DIN 41585(m)

Note:
- The product is intended for typical roof/fender antennas.
- Do not use with integrated glass or active roof antennas

Additional information:
- Mounting: adhesive/screw mounting
- Additional info: Crossover
- Category/Special feature: Active crossover for passive single-cable solution

Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. With a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551, as any phantom voltage from the radio is not passed through.

The best results are achieved when the splitter is combined with a passive FM/UKW/DAB antenna: - 16 V antenna: ATTB_2116_01 - Flex antenna with adjustable rod from 10-115 degrees: ATTB_3940_01 - Shark/shark antenna: ATTB_3759_01 These antennas always have a piece of cable 40cm with a Fakra socket. You can then use a possibly existing Fakra cable or bring the signal into the dashboard with the extension cable Dietz: 8479 (Fakra plug - DIN plug, length 5 metres). Connect the splitter there. If the radio has an ISO antenna connection for FM, you will also need the adapter, Dietz 8300.

Original article number: 4726.01

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Active radio distributor for the vehicle or house interior with the following functions and features:
- Distribution of analogue radio and DAB+ frequency ranges
- Improvement of the reception quality of passive radio antennas
- Simple and quick mounting
- Cable type: RG 174
- Services: AM/FM, DAB, DAB+
- connectors: SMB(f), FAKRA(m) Z, DIN 41585(m)

Note:
- The product is intended for typical roof/fender antennas.
- Do not use with integrated glass or active roof antennas

Additional information:
- Mounting: Adhesive/screw mounting
- Additional info: Crossover
- Category/Special feature: Active crossover for passive single-cable solution

Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. With a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551, as any phantom voltage from the radio is not passed through.

The best results are achieved when the splitter is combined with a passive FM/UKW/DAB antenna: - 16 V antenna: ATTB_2116_01 - Flex antenna with adjustable rod from 10-115 degrees: ATTB_3940_01 - Shark/shark antenna: ATTB_3759_01 These antennas always have a piece of cable 40cm with a Fakra socket. You can then use a possibly existing Fakra cable or bring the signal into the dashboard with the extension cable Dietz: 8475 (Fakra plug - Fakra socket, length 5 metres). Connect the splitter there. If the radio has an ISO antenna connection for FM, you will also need the adapter, Dietz 8300.

Original article number: 4726.04

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Active radio distributor for the vehicle or house interior with the following functions and features:
- Distribution of analogue radio and DAB+ frequency ranges
- Improvement of the reception quality of passive radio antennas
- Simple and quick mounting
- Cable type: RG 174
- Services: AM/FM, DAB, DAB+
- Connectors: FAKRA(f) Z, SMB(f)

Note:
- The product is intended for typical roof/fender antennas.
- Do not use with integrated glass or active roof antennas

Additional information:
- Mounting: Adhesive/screw mounting
- Additional info: Crossover
- Category/Special feature: Active crossover for passive single-cable solution

Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. With a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551, as any phantom voltage from the radio is not passed through.

The best results are achieved when the splitter is combined with a passive antenna FM/UKW/DAB:
- 16 V antenna: ATTB_2116_01
- Flex antenna with adjustable rod from 10-115 degrees: ATTB_3940_01
- Shark antenna: ATTB_3759_01

These antennas always have a piece of cable 40cm with a Fakra socket. You can then use a possibly existing Fakra cable or bring the signal into the dashboard with the extension cable Dietz: 8475 (Fakra plug - Fakra socket, length 5 metres). Connect the splitter there. If the radio has a DIN antenna connection for VHF, you will also need the adapter: Dietz 8509 (Fakra plug - DIN plug) or if the radio has an ISO connection: Dietz 8508 (Faka plug - ISO plug)

Original article number: 4726.03

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Active radio distributor for the vehicle or house interior with the following functions and features:
- Distribution of analogue radio and DAB+ frequency ranges
- Improvement of the reception quality of passive radio antennas
- Simple and quick mounting
- Cable type: RG 174
- Services: AM/FM, DAB, DAB+
- Connectors: SMB(f), ISO 10599(f), ISO 10599(m)

Note:
- The product is intended for typical roof/fender antennas.
- Do not use with integrated glass or active roof antennas

Additional information:
- Mounting: adhesive/screw mounting
- Additional info: Crossover
- Category/Special feature: Active crossover for passive single-cable solution

Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. With a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551, as any phantom voltage from the radio is not passed through.

The best results are achieved when the splitter is combined with a passive FM/UKW/DAB antenna:
- 16 V antenna: ATTB_2116_01
- Flex antenna with adjustable rod from 10-115 degrees: ATTB_3940_01
- Shark antenna: ATTB_3759_01

These antennas always have a piece of cable 40cm with a Fakra socket. You can then use a possibly existing fakra cable or you can use the extension cable
- Dietz: 8479 (Fakra plug - DIN plug, length 5 metres) and
- Dietz adapter 8512 (DIN socket - ISO plug)
bring the signal into the dashboard. Connect the splitter there. If the radio has a DIN antenna connection for VHF, then you also need the adapter, Dietz 8300.

Original article number: 4726.02

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Broadcast distributor for vehicle or house interiors with the following functions and features:
- Distribution of AM/FM and DAB, DAB+ frequency ranges
- Phantom power supply for an external antenna or radio amplifier
- Simple and quick mounting
- Cable type: RG 174
- Services: AM/FM, DAB, DAB+
- Connectors: SMB(f), DIN 41585(f), DIN 41585(m)

Additional information:
- Mounting: adhesive/screw mounting
- Additional info: Crossover
- Category/special feature: passive crossover for active single-cable solution

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Broadcast distributor for vehicle or house interiors with the following functions and features:
- Distribution of AM/FM and DAB, DAB+ frequency ranges
- Phantom power supply for an external antenna or radio amplifier
- Simple and quick mounting
- Cable type: RG 174
- Services: AM/FM, DAB, DAB+
- Connectors: SMB(f), FAKRA(m) Z, ISO 10599(m)

Additional information:
- Mounting: adhesive/screw mounting
- Additional info: Crossover
- Category/special feature: passive crossover for active single-cable solution

Dimensions:
- Width: 43 mm
- Height: 8 mm
- Length: 33 mm
- Weight: 0.04 kg

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Broadcast distributor for vehicle or house interiors with the following functions and features:
- Distribution of AM/FM and DAB+ frequency ranges
- Phantom power supply for an external antenna or radio amplifier
- Simple and quick mounting
- Cable type: RG 174
- Services: AM/FM, DAB, DAB+
- Connectors: SMB(f), FAKRA(m) Z, DIN 41585(m)

Additional information:
- Mounting: adhesive/screw mounting
- Additional info: Crossover
- Category/special feature: passive crossover for active single-cable solution

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

- Die Antenne hat 2 Pole und benötigt keine Verbindung zu Metall und funktioniert hervorragend in Kunststoff- oder GFK-Kabinen, wie z.B. Wohnmobilen, Traktoren, Bagger usw.
- Die Betriebsspannung wird über eine separate Versorgungsleitung der Antenne zugeführt
- Die Spannungszuführung muss an einen abgesicherten Stromkreis angeschlossen werden
- Verwendbar mit 4724_05 (Rundfunkverteiler für die Aufteilung AM/FM und DAB+ Frequenzen)
- Die Spannungslitze des Rundfunkverteilers wird nicht angeschlossen
- Kabeltyp: 75 Ohm
- Dienste: AM/FM, DAB
- Kabellänge: 0,45 m
- Konnektoren: Fakra Buchse (f), Z-codiert

Zusatzinformationen:
- Montage: Klebe-/Schraubmontage
- Zusatzinfo: Rundfunkantenne
- Kategorie/Besonderheit: leistungsstarkte aktive und potentialfreie Dipolantenne

Maße:
- Breite: 68 mm
- Höhe: 11 mm
- Länge: 143 mm
- Gewicht: 0.183 kg

Hinweis:
Bei vielen Wohnmobilen klagen die Fahrer über schlechten UKW/FM Empfang. Abhilfe schafft diese aktive Antenne, die gut unter Kunststoffteilen eingebaut werden kann. Die 2 Drähte der Antenne müssen mindestens 5 cm Abstand zu Metallteilen haben und sollen rechts und links von der Elektronik möglichst waagrecht verbaut werden. Wenn nicht anders möglich, dann kann auch ein Arm der Antenne nach oben verlegt werden.
Mit dem angegebenen Splitter kann die Antenne auch für den DAB+ Emfang verwendet werden.

Wir empfehlen folgendes Zubehör:
- ATTB_4724_05: Passiver Splitter mit DIN/SMB Anschlüssen
- Fakra Verlängerungen:
9441: 1 m
9473; 2 m
9443: 3m
9475: 5m
9447: 7,5m

Originalartikelnummer: 5002.07

*************************************************************************************************
Angaben zur Produktsicherheit:
Marke: ATTB
Hersteller: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

High-quality DAB+ splitter including two downstream amplifiers from Antenne Bad Blankenburg, Art. No. 4721.01 or 4721_01
Generates an additional DAB/DAB+ signal from an FM/VHF antenna.
Connections to the radio:
FM/UKW: 150 Ohm DIN plug
DAB/DAB+: SMB Female (female)
Connector to antenna: 150 Ohm female

Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. If a phantom antenna is used, a phantom adapter must be inserted between the splitter and the antenna connector, e.g. 8551.
The following adapter cables are included in the delivery:
8524 Fakra socket DIN plug
8514 Fakra socket DIN socket
8526 Fakra socket SMB socket

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

High-quality DAB+ splitter including two downstream amplifiers from Antenne Bad Blankenburg, Art. No. 4721.01 or 4721_01 Generates an additional DAB/DAB+ signal from a VHF/FM antenna Connections to the radio:
Fakra plug
DAB/DAB+: Fakra plug
Connection to the antenna: Fakra plug

Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. In the case of a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551.
For adaptation to radios with ISO and DIN connectors we recommend the complete kits 41107 and 41108 or the use of the following adapters: (not included in delivery.)
8524 Fakra socket DIN plug
8514 Fakra socket DIN socket

8525 Fakra socket ISO plug
8555 Fakra socket ISO socket
8526 Fakra socket SMB socket
8527 Fakra socket SMA plug

8529 Fakra socket to Fakra socket

For the adaptation in vehicles with M10 antenna connection (screw thread) you need the following accessories. Assumption: Antenna with screw connection in the boot, e.g. BMW E36, and splitter is to be installed in the boot:
From the antenna to the splitter input:
ATTB_2327_02 with adapter 8529
From the splitter to the existing cable for VHF:
ATTB_2348_02
From splitter to DAB receiver:
9482, 5 m cable with SMB socket for digital receiver

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************