Active radio distributor for the vehicle or house interior with the following functions and features:
- Distribution of analogue radio and DAB+ frequency ranges
- Improvement of the reception quality of passive radio antennas
- Simple and quick mounting
- Cable type: RG 174
- Services: AM/FM, DAB, DAB+
- Connectors: FAKRA(f) Z, SMB(f)
Note:
- The product is intended for typical roof/fender antennas.
- Do not use with integrated glass or active roof antennas
Additional information:
- Mounting: Adhesive/screw mounting
- Additional info: Crossover
- Category/Special feature: Active crossover for passive single-cable solution
Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. With a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551, as any phantom voltage from the radio is not passed through.
The best results are achieved when the splitter is combined with a passive antenna FM/UKW/DAB:
- 16 V antenna: ATTB_2116_01
- Flex antenna with adjustable rod from 10-115 degrees: ATTB_3940_01
- Shark antenna: ATTB_3759_01
These antennas always have a piece of cable 40cm with a Fakra socket. You can then use a possibly existing Fakra cable or bring the signal into the dashboard with the extension cable Dietz: 8475 (Fakra plug - Fakra socket, length 5 metres). Connect the splitter there. If the radio has a DIN antenna connection for VHF, you will also need the adapter: Dietz 8509 (Fakra plug - DIN plug) or if the radio has an ISO connection: Dietz 8508 (Faka plug - ISO plug)
