Active radio distributor for the vehicle or house interior with the following functions and features:
- Distribution of analogue radio and DAB+ frequency ranges
- Improvement of the reception quality of passive radio antennas
- Simple and quick mounting
- Cable type: RG 174
- Services: AM/FM, DAB, DAB+
- Connectors: SMB(f), ISO 10599(f), ISO 10599(m)
Note:
- The product is intended for typical roof/fender antennas.
- Do not use with integrated glass or active roof antennas
Additional information:
- Mounting: adhesive/screw mounting
- Additional info: Crossover
- Category/Special feature: Active crossover for passive single-cable solution
Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. With a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551, as any phantom voltage from the radio is not passed through.
The best results are achieved when the splitter is combined with a passive FM/UKW/DAB antenna:
- 16 V antenna: ATTB_2116_01
- Flex antenna with adjustable rod from 10-115 degrees: ATTB_3940_01
- Shark antenna: ATTB_3759_01
These antennas always have a piece of cable 40cm with a Fakra socket. You can then use a possibly existing fakra cable or you can use the extension cable
- Dietz: 8479 (Fakra plug - DIN plug, length 5 metres) and
- Dietz adapter 8512 (DIN socket - ISO plug)
bring the signal into the dashboard. Connect the splitter there. If the radio has a DIN antenna connection for VHF, then you also need the adapter, Dietz 8300.
Original article number: 4726.02
*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************
