According to our tests, the A2 antenna is currently the best antenna for optimum radio reception in camper vans. The electronics, the antenna radiator and the antenna supports are perfectly matched to each other. You will be thrilled! In addition, the antenna is equipped with GPS and GPS Glonass and thus supports the future-oriented European GPS system.
Delivery contents:
Antenna A2
Lowloss cable 7.5 m, Fakra socket - Fakra socket (B-coding, white)
Adapter 1: Fakra plug - DIN plug, for VHF (B-coding, white)
Adapter 2: Fakra plug - ISO plug, for VHF (B-coding, white)
Lowloss cable 7.5 m, Fakra socket - SMB socket , for DAB+ (G-coding, grey)
GPS cable 7.5 m, Fakra socket - Fakra socket (C coding, blue)
Adapter 3: Fakra plug - GT5 socket (e.g. Alpine, Kenwood, Clarion), (C-coding, blue)
Adapter 4: Fakra plug - GT16 socket (f. Pioneer), (C-coding, blue)
Roof antenna with the following features:
- DAB reception, active and low noise in BAND 3 and L (passive).
- VHF/FM/AM reception, active and low noise
- active GPS antenna
- 12 volt power supply either via inner conductor of the cable connections (phantom power) or via DIN plug-in sleeve (see picture)
- low-noise antenna rod
- low installation depth (approx. 15 mm)
- Gain: FM: 14 dB
- Gain: AM: 6dB
- Gain: DAB+: 10 dB
- Gain: GPS/Glonass: 28 dB
- Power supply: 12 Volt, 25mA
- Cable: RG 174, AM/FM 110 mm, Fakra plug, white
- Cable: RG 174, DAB+ 200 mm, Fakra plug, grey
- Cable: RG 174, GPS 150 mm, fakra plug, blue
Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).
Technical data:
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm
Note: This set replaces the previous sets:
A2T0L750DIN
A2T0L750DYN
Optionally available: articulated joint ATTB_4615_01.
*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************
