DN-Ultra
Dekaclean Ultra cleaner by Dekalin, 1000 ml, for degreasing/cleaning

Dekaclean Ultra cleaner by Dekalin, 1000 ml, for degreasing/cleaning

Product No.:
DN-Ultra
Shipping time:
1-2 days 1-2 days (abroad may vary)
Weight:
0.845 kg per piece
18,99 EUR
18,99 EUR per

incl. 19% tax excl. Shipping costs

Customers who bought this product bought also the following products:

Dekafinisher from Dekalin, 500 ml, for surface smoothing
The aqueous solution of surface-active substances serves as an aid for the surface smoothing of our MS polymer adhesives and sealants. Dekafinisher is ready for use immediately, but can also be applied diluted in a mixing ratio of 2:1 (2 parts finisher, 1 part water).

Properties:
- for nice visible seams
- maintains the gloss of the sealant surface
- colour pigments of the sealant are not washed out

ADVANTAGES COMPARED TO RINSING AGENT:
When smoothing with washing-up liquid, the mixing ratio is usually such that only a little washing-up liquid is dissolved in the water. Therefore, the smoothing ability is usually very limited.
Dishwashing detergents have a grease-dissolving effect. If the joint is smoothed with washing-up liquid, there is a risk that components will be dissolved from the surface, making it dull and matt. When cleaning later, there is often abrasion with unsightly streaks.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: DEKALIN
Hersteller/Manufacturer: DEKA Kleben & Dichten GmbH, Kirchgasse 1, 61203 Reichelsheim, info@dekalin.de
*************************************************************************************************

Art.Nr:

23,99 EUR
47,98 EUR per
incl. 19% tax excl. Shipping costs
Dekavator, 30 ml, adhesive activator from Dekalin for e.g. plastics
For substrates with low surface tension (mostly plastics) or if the composition of the substrate is not known, we recommend using our DEKAVATOR adhesive activator.
It ensures a permanent bond and prevents the penetration of moisture in outdoor areas.
DEKAVATOR improves the bondability, because it acts as a chemical bridge between the joining part and the adhesive.

- Improves adhesion and cleans
- Fast drying, flash-off time approx. 5-10 minutes
- Easy to use
- Economical consumption

You will find working instructions under the "Documents" tab of the Dekalin adhesive set, article no., DN-SetMS5, here in the shop.

The technical data sheet and the safety data sheet can be found under the "Documents" tab here.

Hazard statements:
H225 Highly flammable liquid and vapour.
H315 Causes skin irritation
H318 Causes serious eye damage
H361d Suspected of damaging the unborn child
H336 May cause drowsiness and dizziness
H304 May be fatal if swallowed and enters airways
H411 Toxic to aquatic life with long lasting effects.
For experienced users only.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: DEKALIN
Hersteller/Manufacturer: DEKA Kleben & Dichten GmbH, Kirchgasse 1, 61203 Reichelsheim, info@dekalin.de
*************************************************************************************************

Art.Nr:

18,99 EUR
633,00 EUR per
incl. 19% tax excl. Shipping costs
ECu Powercable, 35 mm², black, 40 m, made in Germany!
Fine pure copper cable with a copper content of 99.9%.
Especially for use in cars, trucks and motorhomes
The imprinted metre marking facilitates cutting the battery cable to length

Bobbin length: 40 m
Bobbin diameter: 30 cm
Spulenbreite: 14 cm
Perforation of the bobbin carrier: 31 mm

Technical data:

Conductor: electrolytic copper, bare according to DIN 13602
Insulation: lead-free soft PVC according to ISO 6722-1, class A
Shore hardness: approx. A89
Temperature range: -40 to +90 degrees Celsius (3000h)
Voltage range: max 60 VDC or 25 Volt AC
Nominal cross-section: 50 mm2
Weight: approx. 17.25 kg
Outer diameter: approx. 12.7 mm +/- 0.2 mm
Strand diameter: max. 9.5 mm
Number of single wires: 378
Single wire diameter: 0.41 mm
Electrical resistance at 20 degrees: 0.38 Ohm/km
Copper insert per roll: 14.4 kg
RoHS & REACH compliant


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr:

489,99 EUR
16,33 EUR per
incl. 19% tax excl. Shipping costs