4xLTE/5G/2xWLAN/GPS High Performance Antenna with 1.0 m cable set

Antenna connection set for Panorama Antennas:

Contents:
1 cable with SMA socket - SMA plug labelled "LTE/5G MAIN 1".
1 cable with SMA socket - SMA plug labelled "LTE/5G ANT 2
1 cable with SMA socket - SMA plug labelled "LTE/5G ANT 3
1 cable with SMA socket - SMA plug labelled "LTE/5G ANT 4
1 cable with SMA socket RP - SMA plug rerverse pole labelled with "WLAN MAIN 1".
1 cable with SMA socket RP - SMA plug Rerverse pole labelled "WLAN ANT 2
1 cable with SMA socket - SMA plug labelled "GPS

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Length: 1.5 metres
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Ideal to connect the following 5G antennas from Panorama Antennas to routers from Teltonika and equivalents.

The cable set is only usable for the following antennas:
PAN-ANT510
PAN-ANT510B

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

The classic among sealants: Our dab-off sealant DEKASEAL 8936 impresses with high impermeability, UV resistance and elasticity, as it does not harden.

The easy application convinces professionals and nonprofessionals alike.

There is no need for additional cleaning work, as protruding residues can be removed without leaving any residue. The sealant works well without pre-treatment on clean, dry, dust- and grease-free substrates made of aluminium, stainless steel, zinc, copper, brass, powder-coated metal, most painted metal surfaces, glass, PVC, polyester (GRP), painted wood and many other materials.

- DEKASEAL 8936 can be applied by hand or with the aid of a compressed air gun.
- Available in light grey and anthracite.
- 310 ml cartridges, 560 ml tubular bags.
- Temperature resistant from -30°C to +100°C.
- Long shelf life, up to two years.
- Easy cleaning by dabbing.

Areas of application:

- Sealing of antenna mounts
- Sealing of cable penetrations
- Sealing of overlaps and joints.
- Sealing of screw connections.
- Sealing of sun roof systems.
- Application under facing strips for the installation of windows and light hatches in caravans and motorhomes.
- Suitable for use between metal plates, glass, GRP, wood and other materials.
- Sealing of rubber-glass joints, trims.
- Sealing of headlights and rear lights, rear view cameras.
- Between cabinet wedges for noise reduction.

The technical data sheet and the safety data sheet can be found here under the "Documents" tab.

Danger warning:
H225 Flammable liquid and vapour
H 315 Causes skin irritation
H412 Harmful to aquatic organisms, long lasting effects

For experienced users only.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: DEKALIN
Hersteller/Manufacturer: DEKA Kleben & Dichten GmbH, Kirchgasse 1, 61203 Reichelsheim, info@dekalin.de
*************************************************************************************************

The aqueous solution of surface-active substances serves as an aid for the surface smoothing of our MS polymer adhesives and sealants. Dekafinisher is ready for use immediately, but can also be applied diluted in a mixing ratio of 2:1 (2 parts finisher, 1 part water).

Properties:
- for nice visible seams
- maintains the gloss of the sealant surface
- colour pigments of the sealant are not washed out

ADVANTAGES COMPARED TO RINSING AGENT:
When smoothing with washing-up liquid, the mixing ratio is usually such that only a little washing-up liquid is dissolved in the water. Therefore, the smoothing ability is usually very limited.
Dishwashing detergents have a grease-dissolving effect. If the joint is smoothed with washing-up liquid, there is a risk that components will be dissolved from the surface, making it dull and matt. When cleaning later, there is often abrasion with unsightly streaks.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: DEKALIN
Hersteller/Manufacturer: DEKA Kleben & Dichten GmbH, Kirchgasse 1, 61203 Reichelsheim, info@dekalin.de
*************************************************************************************************