ECu Powercable, 35 mm², black, 40 m, made in Germany!

Fine pure copper cable with a copper content of 99.9%.
Especially for use in cars, trucks and motorhomes
The imprinted metre marking facilitates cutting the battery cable to length

Bobbin length: 40 m
Bobbin diameter: 30 cm
Spulenbreite: 14 cm
Perforation of the bobbin carrier: 31 mm

Technical data:

Conductor: electrolytic copper, bare according to DIN 13602
Insulation: lead-free soft PVC according to ISO 6722-1, class A
Shore hardness: approx. A89
Temperature range: -40 to +90 degrees Celsius (3000h)
Voltage range: max 60 VDC or 25 Volt AC
Nominal cross-section: 50 mm2
Weight: approx. 17.25 kg
Outer diameter: approx. 12.7 mm +/- 0.2 mm
Strand diameter: max. 9.74 mm
Number of single wires: 1470
Single wire diameter: 0.20 mm
Electrical resistance at 20 degrees: 0.39 Ohm/km
Copper insert per roll: 14,4 kg
RoHS & REACH compliant


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Ideally prepared surfaces are dry, free of dust, oil, oxides, release agents and other contaminants. The fast-drying and residue-free DEKACLEAN ULTRA cleaner reliably degreases and cleans surfaces. Afterwards, bonding or sealing, including perfect adhesion, is a breeze.

- Dries quickly
- Reinigt gründlich und rückstandsfrei
- Highly effective and economical
- Without influencing or interfering with the curing process

The technical data sheets and the safety data sheets for individual components of the set can be found here under the "Documents" tab.

Hazard statements:
H225 Highly flammable liquid and vapour
H319 Causes severe eye irritation
H336 May cause drowsiness and dizziness
For experienced users only.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: DEKALIN
Hersteller/Manufacturer: DEKA Kleben & Dichten GmbH, Kirchgasse 1, 61203 Reichelsheim, info@dekalin.de
*************************************************************************************************

For substrates with low surface tension (mostly plastics) or if the composition of the substrate is not known, we recommend using our DEKAVATOR adhesive activator.
It ensures a permanent bond and prevents the penetration of moisture in outdoor areas.
DEKAVATOR improves the bondability, because it acts as a chemical bridge between the joining part and the adhesive.

- Improves adhesion and cleans
- Fast drying, flash-off time approx. 5-10 minutes
- Easy to use
- Economical consumption

You will find working instructions under the "Documents" tab of the Dekalin adhesive set, article no., DN-SetMS5, here in the shop.

The technical data sheet and the safety data sheet can be found under the "Documents" tab here.

Hazard statements:
H225 Highly flammable liquid and vapour.
H315 Causes skin irritation
H318 Causes serious eye damage
H361d Suspected of damaging the unborn child
H336 May cause drowsiness and dizziness
H304 May be fatal if swallowed and enters airways
H411 Toxic to aquatic life with long lasting effects.
For experienced users only.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: DEKALIN
Hersteller/Manufacturer: DEKA Kleben & Dichten GmbH, Kirchgasse 1, 61203 Reichelsheim, info@dekalin.de
*************************************************************************************************