Thread extension 72mm, VA

Nut with claw M18x1 for thread extension
Suitable for mounting roof antennas

Suitable for
ATTB_4612_39
ATTB_4612_40
ATTB_4691_01
ATTB_4691_03
ATTB_4691_04

Original article number: 4065.01

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

For substrates with low surface tension (mostly plastics) or if the composition of the substrate is not known, we recommend using our DEKAVATOR adhesive activator.
It ensures a permanent bond and prevents the penetration of moisture in outdoor areas.
DEKAVATOR improves the bondability, because it acts as a chemical bridge between the joining part and the adhesive.

- Improves adhesion and cleans
- Fast drying, flash-off time approx. 5-10 minutes
- Easy to use
- Economical consumption

You will find working instructions under the "Documents" tab of the Dekalin adhesive set, article no., DN-SetMS5, here in the shop.

The technical data sheet and the safety data sheet can be found under the "Documents" tab here.

Hazard statements:
H225 Highly flammable liquid and vapour.
H315 Causes skin irritation
H318 Causes serious eye damage
H361d Suspected of damaging the unborn child
H336 May cause drowsiness and dizziness
H304 May be fatal if swallowed and enters airways
H411 Toxic to aquatic life with long lasting effects.
For experienced users only.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: DEKALIN
Hersteller/Manufacturer: DEKA Kleben & Dichten GmbH, Kirchgasse 1, 61203 Reichelsheim, info@dekalin.de
*************************************************************************************************

Meter goods: The number of the order quantity corresponds to the cable length in metres! Example: You order 5 pieces, i.e. you receive the cable in 5 metres length. Note: Meter goods cannot be exchanged!

Fine pure copper cable with a copper content of 99.9%. especially for use in motor vehicles, trucks, camper vans The imprinted metre marking makes it easier to cut the battery cable to length

Technical data:

Conductor: electrolytic copper, bare according to DIN 13602
Insulation: lead-free soft PVC according to ISO 6722-1, class A
Shore hardness: approx. A89
Temperature range: -40 to +90 degrees Celsius (3000h)
Voltage range: max 60 VDC or 25 Volt AC
Nominal cross-section: 6 mm2
Outer diameter: approx. 4.7 mm +/- 0.2 mm
Strand diameter: max. 3.2 mm
Number of single wires: 84
Single wire diameter: 0.305 mm
Electrical resistance at 20 degrees: 3.1 Ohm/km
RoHS & REACH compliant


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Meter goods: The number of the order quantity corresponds to the cable length in metres! Example: You order 5 pieces, i.e. you receive the cable in 5 metres length. Note: Meter goods cannot be exchanged!

Fine pure copper cable with a copper content of 99.9%. especially for use in motor vehicles, trucks, camper vans The imprinted metre marking makes it easier to cut the battery cable to length

Technical data:

Conductor: electrolytic copper, bare according to DIN 13602
Insulation: lead-free soft PVC according to ISO 6722-1, class A
Shore hardness: approx. A89
Temperature range: -40 to +90 degrees Celsius (3000h)
Voltage range: max 60 VDC or 25 Volt AC
Nominal cross-section: 6 mm2
Outer diameter: approx. 4.7 mm +/- 0.2 mm
Strand diameter: max. 3.2 mm
Number of single wires: 84
Single wire diameter: 0.305 mm
Electrical resistance at 20 degrees: 3.12 Ohm/km
RoHS & REACH compliant


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************