Ring eyelet 16 mm2, d=5,3 mm

For substrates with low surface tension (mostly plastics) or if the composition of the substrate is not known, we recommend using our DEKAVATOR adhesive activator.
It ensures a permanent bond and prevents the penetration of moisture in outdoor areas.
DEKAVATOR improves the bondability, because it acts as a chemical bridge between the joining part and the adhesive.

- Improves adhesion and cleans
- Fast drying, flash-off time approx. 5-10 minutes
- Easy to use
- Economical consumption

You will find working instructions under the "Documents" tab of the Dekalin adhesive set, article no., DN-SetMS5, here in the shop.

The technical data sheet and the safety data sheet can be found under the "Documents" tab here.

Hazard statements:
H225 Highly flammable liquid and vapour.
H315 Causes skin irritation
H318 Causes serious eye damage
H361d Suspected of damaging the unborn child
H336 May cause drowsiness and dizziness
H304 May be fatal if swallowed and enters airways
H411 Toxic to aquatic life with long lasting effects.
For experienced users only.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: DEKALIN
Hersteller/Manufacturer: DEKA Kleben & Dichten GmbH, Kirchgasse 1, 61203 Reichelsheim, info@dekalin.de
*************************************************************************************************

DEKASYL MS-5 is an MS polymer-based adhesive with high adhesion and high initial strength for structural bonding of brackets, covers and components.
Due to its high strength, fixture times can be reduced or clamping can be almost completely eliminated.

Properties:

- Very high initial adhesion and rapid build-up of internal strength.
- Adhesive and sealant for structural bonding of brackets, covers and components (e.g. SAT systems, antennas, etc.).
- High tear strength & wide adhesion spectrum
- Permanently elastic and vibration resistant (impact resistant)
- UV, weather and ageing resistant
- Resistant to chemicals and salt water

Areas of application:

- Elastic connections and sealing.
- Bonding of antenna supports and antenna sheets
- Bonding of solar modules and cable bushings.
- Bonding of SAT and solar installations.
- Supporting awning screw connections.
- Bonding of edge profiles with aluminium or polyester.
- Bonding of polyester parts with metal frames.
- Bonding of sheet metal and aluminium.
- Bonding of PVC, polystyrene and other insulating materials against wood, sheet metal and many more.

You will find bonding instructions under the "Documents" tab of the Dekalin adhesive set, article no., DN-SetMS5, here in the shop.

The technical data sheet and the safety data sheet can be found here under the "Documents" tab.



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: DEKALIN
Hersteller/Manufacturer: DEKA Kleben & Dichten GmbH, Kirchgasse 1, 61203 Reichelsheim, info@dekalin.de
*************************************************************************************************

DEKASYL MS-5 is an MS polymer-based adhesive with high adhesion and high initial strength for structural bonding of brackets, covers and components.
Due to its high strength, fixture times can be reduced or clamping can be almost completely eliminated.

Properties:

- Very high initial adhesion and rapid build-up of internal strength.
- Adhesive and sealant for structural bonding of brackets, covers and components (e.g. SAT systems, antennas, etc.).
- High tear strength & wide adhesion spectrum
- Permanently elastic and vibration resistant (impact resistant)
- UV, weather and ageing resistant
- Resistant to chemicals and salt water

Areas of application:

- Elastic connections and sealing.
- Bonding of antenna supports and antenna sheets
- Bonding of solar modules and cable bushings.
- Bonding of SAT and solar installations.
- Supporting awning screw connections.
- Bonding of edge profiles with aluminium or polyester.
- Bonding of polyester parts with metal frames.
- Bonding of sheet metal and aluminium.
- Bonding of PVC, polystyrene and other insulating materials against wood, sheet metal and many more.

You will find bonding instructions under the "Documents" tab of the Dekalin adhesive set, article no., DN-SetMS5, here in the shop.

The technical data sheet and the safety data sheet can be found here under the "Documents" tab.



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: DEKALIN
Hersteller/Manufacturer: DEKA Kleben & Dichten GmbH, Kirchgasse 1, 61203 Reichelsheim, info@dekalin.de
*************************************************************************************************