LowLoss extension SMB socket - FAKRA socket, 150 cm

Input voltage/max. current: 12 V (10.5-16.5) 39A
Charging capacity (V/A): 12 / 30
Recommended battery capacity: 60-200/260 Ah
Charging characteristics adjustable for:
Lead-acid
Gel
AGM 1 + AGM 2
LiFePO4, 1-fold

General notes:

Charge boosters, also called B2B chargers (Battery to Battery) or charge controllers or simply VCC, ensure optimum charging of the body battery while driving. The latest motorhomes with Euro 6 or Euro 6+ engines are equipped with an intelligent battery management system (BMS), which, among other things, only switches on the alternator when the starter battery needs power again in order to comply with the strict emission standards. This means that the body battery is largely ignored and may not be sufficiently charged.

The charge booster signals to the alternator that charging current is needed and electronically increases the charging voltage for the body battery, also to compensate for line losses. Various charging programmes enable precise setting of the optimum charging characteristic for the body battery. It also disconnects the chassis mains from the body mains, as the battery disconnect relay is removed or deactivated. Up to 30 Ah can be recharged per driving hour with smaller charge boosters.

Charge boosters are useful if
- you own a Euro 6 or Euro 6+ vehicle
- you mainly make short journeys
- you are mainly self-sufficient and want to use the driving time effectively for battery charging
- you only have a small solar system and want to use an additional charging source in bad weather.

You can do without a charging booster for the time being and always retrofit it later, when

- you are connected to shore power again after 1 day at the latest
- you have installed a well-dimensioned solar system (200 Wp or more).

You can install a charge booster yourself if you know what you are doing. If you are unsure, you should definitely consult a specialist.

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Votronic
Hersteller/Manufacturer: VOTRONIC Elektronik-Systeme GmbH, Johann-Friedrich-Diehm-Str. 2, 36341 Lauterbach, info@votronic.de
*************************************************************************************************

LowLoss cables are the cables with the best electrical characteristics for lossless transmission of antenna signals. Our Lowloss cable series has the best conductivities and therefore the lowest cable resistance of all our cable series. They are achieved by using tinned leads for the inner conductor (7 * d = 0.25mm), shielding (42 * d = 0.11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra connectors and sockets from Rosenberger are used. They have an excellent workmanship and fit through a special punch-bending technology (Fakra-SF).

Specifications:

Length: 1 meter
Characteristic impedance: 50 ohms Capacity: 95pF / m Advanced POLYTHEN insulation 2.00 mm
Aluminum foil screen and additional tinned copper braid
Outer diameter: 3.6 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Low-loss cables (...little loss cables) are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has best conductance values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bending technology from Rosenberger(Fakra-SF).

Technical data:

Length: 1,5 meter
characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braid
Outer diameter: 3.6 mm

Specially designed for loss-free transmission of FM/UKW signals from antenna Blankenburgantennen or all other antennas that have a Fakra plug for FM/UKW.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************