DAB+U - Digital radio through USB

Phantom feed adapter - power supply for active antennas with antenna amplifier. For feeding the phantom signal into retrofit devices without own feed and with SMB connection.
Some retrofit devices have a bad ground at the SMB output. With the help of the black ground cable the ground potential can be improved.

The adapter is also suitable for our antenna measuring devices 15991 and D_DBU3GEN_dB. These measuring devices do not output phantom voltage. With the help of this adapter also active antennas can be measured. The adapter outputs 12 Volt phantom power at the SMB connector. We recommend to use the adapter with a Zig-plug. (see additional picture)

Connections on the adapter:
Auto side: SMB connector
On the radio side: SMB socket
Red cable: 12 Volt
Black cable: ground


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Magnetic antenna for steel roofs with the following properties:

- optimum reception characteristics on the vehicle roof
- ideal for temporary use
- better than window antennas
- ideal as reference antenna for the Dietz antenna measuring device 15991

Connection:
3 metre RG 174 cable with SMB socket (angled version).

Technical data:
Angle of inclination: 70 degrees
Radiator length: 28 cm
Impedance: 50 Ohm
Diameter of base: 35 mm
Frequency range: 174-240 MHz, LBAND: 1452-1492 MHz
Resistance: 50 Ohm
Gain 2dBi



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Youngtimer / classic car radio with a 90s look. Old design - new technology!

Radio
- High-end CODEM IV high-end world tuner
- FM (RDS), AM tuner
- Built-in DAB+ tuner

Data carrier
- USB, MMC, SD, SDHC (up to 32 GB)

Media player
- Audio from USB/SDHC
- Audio formats MP3, WMA

Bluetooth
- Bluetooth module built-in (HFP, PBAP, A2DP, SPP, AVRCP)
- Twin-Connect
- Phone book access
- Integrated + external microphone
- Navigation Audio Mix

Inputs / Outputs
- 1x front USB
- 1x rear USB
- 1x front aux-in
- 1x front SDHC card reader
- Steering wheel remote control (programmable)

Equalizer / Amplifier
- 3-band semi-parametric equaliser
- Sound Presets (Rock, Pop, Classic)
- X-Bass
- 4-channel preamplifier (4V)
- Separate sub-out
- 4 x 50 Watt Max. Power

General
- Vario Color (illumination of buttons & display in 5 colours)
- Fixed front panel
- Permanent memory
- IR remote control included
- DAB+ window antenna included
- External BT microphone included

Subject to technical changes.

*************************************************************************************************
Product safety information:
Brand: Blaupunkt
Manufacturer: Evo-Sales GmbH, Hastenbecker Weg 33, 31785 Hameln, ticket@bpautomotive.de
*************************************************************************************************

Generates an additional DAB/DAB+ signal from a passive FM/VHF antenna. Amplification FM/UKW and DAB+ 20dB each Connections to the radio: DIN plug SMB socket Connection to antenna: DIN socket Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. With a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551, as any phantom voltage from the radio is not passed through. The best results are achieved when the splitter is combined with a passive FM/UKW/DAB antenna: - 16 V antenna: ATTB_2116_01 - Flex antenna with adjustable rod from 10-115 degrees: ATTB_3940_01 - Shark/shark antenna: ATTB_3759_01 These antennas always have a piece of cable 40cm with a Fakra socket. You can then use a possibly existing Fakra cable or bring the signal into the dashboard with the extension cable Dietz: 8479 (Fakra plug - DIN plug, length 5 metres). Connect the splitter there. If the radio has an ISO antenna connection for FM, you will also need the adapter, Dietz 8300.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************