Antenna adapter FAKRA socket - SMB socket (DABSPL)

High-quality DAB+ splitter including two downstream amplifiers from Antenne Bad Blankenburg, Art. No. 4721.01 or 4721_01 Generates an additional DAB/DAB+ signal from a VHF/FM antenna Connections to the radio:
Fakra plug
DAB/DAB+: Fakra plug
Connection to the antenna: Fakra plug

Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. In the case of a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551.
For adaptation to radios with ISO and DIN connectors we recommend the complete kits 41107 and 41108 or the use of the following adapters: (not included in delivery.)
8524 Fakra socket DIN plug
8514 Fakra socket DIN socket

8525 Fakra socket ISO plug
8555 Fakra socket ISO socket
8526 Fakra socket SMB socket
8527 Fakra socket SMA plug

8529 Fakra socket to Fakra socket

For the adaptation in vehicles with M10 antenna connection (screw thread) you need the following accessories. Assumption: Antenna with screw connection in the boot, e.g. BMW E36, and splitter is to be installed in the boot:
From the antenna to the splitter input:
ATTB_2327_02 with adapter 8529
From the splitter to the existing cable for VHF:
ATTB_2348_02
From splitter to DAB receiver:
9482, 5 m cable with SMB socket for digital receiver

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

High-quality DAB+ splitter including two downstream amplifiers from Antenne Bad Blankenburg, Art. No. 4721.01 or 4721_01 Generates an additional DAB/DAB+ signal from a VHF/FM antenna Connections to the radio:
Fakra plug
DAB/DAB+: Fakra plug
Connection to the antenna: Fakra plug

Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. In the case of a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551.
For adaptation to radios with ISO and DIN connectors we recommend the complete kits 41107 and 41108 or the use of the following adapters: (not included in delivery.)
8524 Fakra socket DIN plug
8514 Fakra socket DIN socket

8525 Fakra socket ISO plug
8555 Fakra socket ISO socket
8526 Fakra socket SMB socket
8527 Fakra socket SMA plug

8529 Fakra socket to Fakra socket

For the adaptation in vehicles with M10 antenna connection (screw thread) you need the following accessories. Assumption: Antenna with screw connection in the boot, e.g. BMW E36, and splitter is to be installed in the boot:
From the antenna to the splitter input:
ATTB_2327_02 with adapter 8529
From the splitter to the existing cable for VHF:
ATTB_2348_02
From splitter to DAB receiver:
9482, 5 m cable with SMB socket for digital receiver

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

Router - antenna - roof mount - set, perfectly matched, consisting of the following components:

Teltonika 5G/WLAN Router RUTX50
Panorama antenna ANT515 (antenna LGMDM4-6-60-24-58 with 7-piece cable set 1.5 m)
12 volt connection, TEL-12V
Mounting kit, TEL-MON2

RUTX50 is your future-proof, multi-network industrial router, offering 5G mobile communication for high-speed and data-heavy applications.

5G dual SIM cellular communication combined with 5 Gigabit Ethernet ports and dual-band Wi-Fi enables reliable ultra-low latency data transfer.

The power of 5G technology, combined with a wide range of interfaces and industrial hardware features, ensures adaptability for future upgrades and expansions.

RUTX50 comes with the RutOS, which provides advanced security features and specialized industrial protocols for a wide range of professional application scenarios, and is compatible with our Remote Management System (RMS), for optimized remote management and monitoring capabilities of large fleets of devices.

Technical data:
- Cellular: 5G sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) - LTE Cat 20 2.0Gbit/s DL, 200Mbit/s UL; 3G - 42Mbit/s DL, 5.76Mbit/s UL.
- CPU: Quad-core ARM Cortex A7, 717 MHz
- Flash storage: 256 MB
- RAM: 256 MB
- Power supply: 4-pin socket, 9-50 VDC
- SIM: 2 x SIM slot (Mini SIM - 2FF), 1.8 V/3 V
- Antenna connections: 4 x SMA for mobile, 2 x RP-SMA for WiFi, 1 x SMA for GNSS
- Ethernet: 5 x 10/100/1000 Ethernet ports: 1 x WAN (configurable as LAN), 4 x LAN
- WiFi: 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates of up to 867 Mbps (Dual Band,
MU-MIMO), 802.11r fast transition, access point (AP), station (STA) - Wireless networking/roaming: Wireless networking (802.11s), fast roaming (802.11r)
- GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS
- Inputs/outputs: On 4-pin socket: 1 x digital input, 1 x digital open collector output
- Other: 1 x USB host, 1 x ground screw
- Status LEDs: 3 x link status LEDs, 3 x link strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x power LED, 2 x 2.4G and 5G WiFi LEDs
- Operating temperature: -40 °C to 75 °C
- Housing: Aluminium housing, DIN rail (can be mounted on both sides), flat installation surface
- Dimensions: (W x H x D) 132 x 44.2 x 95.1 mm
- Weight: 533 g

Software:
- Operating system: RutOS (OpenWrt-based Linux OS)
- Mobile phone functions: Multiple PDN, Auto APN, band lock, SIM change, operator blacklist/whitelist, data/SMS limits.
- Network functions: Routing, failover, firewall, DHCP, DDNS, load balancing, VoIP passthrough, connection monitoring
- Monitoring and management: WEB UI, CLI, SSH, CALL, SMS, TR-069, SNMP, JSON-RPC, MQTT, MODBUS, RMS
- VPN and tunneling: OpenVPN, IPsec, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, WireGuard, ZeroTier
- Cloud solutions: RMS, FOTA, Azure IoT Hub, Cloud of Things, Cumulocity, ThingWorx
- Hotspot External/Internal Radius, SMS OTP, MAC Authentication, Walled Garden
- GNSS: NMEA forwarding, AVL, geofencing

Standard package of the router contains:

- RUTX50 Router
- 230 Voltage Power Supply, 18 W PSU
-12 Voltage cable
- Holding kit, Tel-MON2
- 4 x Mobile antennas (swivel, SMA male)
- 2 x WiFi antennas (magnetic mount, RP-SMA male, 1.5 m cable)
- 1 x GNSS antenna (adhesive, SMA male, 3 m cable)
- Ethernet cable (1.5 m)
- SIM Adapter kit
- QSG (Quick Start Guide)
- Packaging box


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Teltonika (Router und Originalzubehör)
Hersteller/Manufacturer: UAB Teltonika Networks, Baršausko g. 66, Kaunas 51436, Lietuva, info@teltonika.com
Marke/Trademark: Panorama Antennas (Antenne)
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke/Trademark: Dietz (Außenantenne und Kabel)
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

The Sun Pearl modules are manufactured with the innovative shingle technology. Without the surface cell connectors (bus bars) and with black back foil, the module with its dark mono-cells has a homogeneous appearance. Each individual string supplies the full module voltage. The strings are connected in parallel and therefore the module can provide the power of the remaining strings despite shading of individual cells or strings.

The solar panel features high-quality Sun Pearl cells. The shingle cell technology divides the panel into 3 parallel branches. If one branch is covered by shade, the other branches continue to operate. Therefore, the shade resistance of these panels is very high.

Panel dimensions: 1031 x 785 x 35 mm (LxWxH)

12 VDC,
Power, rated power (Pmp) 150 W,
Max. Current: 8.6 A
Cell type and interconnection: 34 * 6 mono
Weight: 9 kg
Further technical data can be found in the additional pictures

Manufacturer: Phaesun

For the installation you still need the following parts, not included in the delivery:

- Roof spoiler
- Adhesive kit
- Quick cable 4
- charge controller
- Roof grommet with rubber insert for twin cable
- Battery cable set with 20 A fuse
- Possibly EBL cable set

We will be happy to advise you!

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Phaesun
Hersteller/Manufacturer: Phaesun GmbH, Brühlweg 9, 87700 Memmingen, info@phaesun.com
*************************************************************************************************