This inverter is designed with a peak power output of 3500 watts for 2 seconds. This is perfect for starting inductive loads such as refrigerators, electric motors, pumps, etc. Air conditioners with a starting current of up to 15A can be started with this inverter. The Blue series is characterized by its long service life. This series is suitable for camping, caravans, motorhomes, boats, leisure activities, as well as industrial applications, solar power systems, and long-term applications.
A residual current device (RCD) is already integrated into the 230V AC output of the inverter, saving you the hassle of retrofitting an RCD in your vehicle. Take a look at the technical details and you will see that this is a modern, high-quality device that represents the latest technology. Thanks to electronically controlled fan operation, the fan only activates when needed. The excellent workmanship and sophisticated technology guarantee reliable operation and a long service life. The device features all necessary safety cut-offs, such as temperature protection, short-circuit protection, undervoltage protection (to protect your battery), and overload protection (in case you connect an excessively large load).
A wired remote control is included, allowing you to switch the inverter on and off. The connection to the inverter is made via a socket on the underside of the device. When the inverter is switched off via the remote control, only a minimal current of approximately 2 mA flows from the battery for communication between the remote control and the inverter. The remote control cable is approximately 5 meters long.
Scope of delivery:
• SWI2200W12V pure sine wave inverter
• Battery connection cable (34mm²) with ring terminals (1 meter)
• Remote control with indicator light and 5-meter cable length
• Of course, you will also receive an instruction manual in German.
Technical data:
- 2000 watts continuous power
- 2200 watts for max. 15 minutes
- 3500 watts for max. 2 seconds
- 4000 watts short-term peak (25ms)
- 10.7 to 16.5V DC input voltage range
- Quartz-precise 230V AC, 50 Hz output voltage
- Pure sine wave
- Total harmonic distortion max. 3%
- Max. efficiency 90%
- Standby power consumption 1.0A
- Alarm signal at 10.7V battery voltage
- Deep discharge protection, device shuts off at 10.2V battery voltage
- Devices reconnect as soon as the battery voltage rises above 11.5V DC
- Overvoltage protection, shuts off at more than 16.5V DC at the input
- The 230V AC output is short-circuit proof
- Integrated residual current device (RCD) in the AC output
- The 12V DC input is reverse polarity protected by fuses
- Automatic shutdown of the voltage converter in case of overload
- Temperature protection, protective shutdown at more than 60°C inside the housing
- Microcontroller controlled
- Temperature and load-controlled fan, the fan only runs when needed
- Power switch on the device (on/off switch)
- Elegant housing Made of aluminum with blue paint
- Operating temperature range: -10°C to +40°C
- Humidity: 95% (non-condensing)
- Dimensions: H=100mm, W=283mm, L=415mm
- Weight: 7.1kg including connection cable (without packaging)
- E-mark (e-mark): This mark indicates that the device may be operated on land and water in vehicles
*************************************************************************************************
Product safety information:
Brand: Fraron
Manufacturer: FraRon electronic GmbH, Industriestr. 2a, 63825 Schöllkrippen, kontakt@fraron.de
*************************************************************************************************
