Extension GPS blue, FAKRA socket-FAKRA socket, 500 cm

Roof antenna with the following functions and features:
- DAB+ reception, active and low-noise in the ranges B III, L-band passive.
- Radio reception, active and low-noise for AM/FM
- 12 V power supply for the amplifiers either via inner conductor of the cable connections (only one connection recommended) or DIN plug-in sleeve
- Active GNSS antenna (phantom power)
- Low-noise antenna rod
- Low installation depth (15 mm)
- Low installation effort, only one mounting hole for 3 functions
- Interchangeable with conventional flex antennas
- Cable type: RG 174
- Services: GLONASS, AM/FM, GPS, DAB+
- Connectors: FAKRA(m) G, FAKRA(m) B, FAKRA(m) C

Especially suitable for:
- Analogue and digital broadcasting
- Navigation systems
- Fleet management

Additional information:
- Mounting: Roof mounting
- Additional information: Kombiflex roof antenna
- Category/Special feature: active antenna with separate signal routing, GPS diagnostic function (only with 3761_06)

Dimensions:
- Width: 65 mm
- Height: 270 mm
- Length: 104 mm
- Weight: 0.153 kg

Suitable replacement antenna: ATTB_4626_11

The antenna is delivered with the following cable set:

LowLoss cable set no. 3, consisting of LowLoss antenna cable with Fakra colour coding for ATTB antennas with FM and DAB+ and RG174 cable for GPS content:
- 5 metre lowloss cable fakra socket - DIN plug, fakra B, beige
- 5 metre lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey
- 5 metre RG174 cable fakra socket - fakra socket, fakra C, blue
- Adapter Fakra male - GT5 female for GPS connection of e.g. Alpine, Kenwood and Clarion devices.

Low loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent workmanship and fit due to a special punching-bending technology of Rosenberger(Fakra-SF).

Original article number of the antenna: 3761.06

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************

With this cable set, 99% of the car radios on the market can be connected with our antennas from ATTB and A1, A2, A3 and AS1 series.

LowLoss cable set no. 9, consisting of 2 LowLoss antenna cables with Fakra colour coding for ATTB antennas with FM and DAB+.
Contents:
- 5 metre lowloss cable fakra socket - fakra socket, beige
- 5 metre lowloss cable fakra socket - SMB socket 90 degrees, fakra G, grey

Adapter for VHF:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

Low loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Length: 5 metres
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Ideal to connect active antennas of the company Antenne Bad Blankenburg with the digital car radio.
For example:
ATTB_2118_01, original number: 2118.01
ATTB_2121_01, original number: 2121.01
ATTB_3761_01, Original number: 3761.01
ATTB_3761_06, Original number: 3761.06
ATTB_3766_01, Original number: 3766.01
ATTB_3775_01, Original number: 3775.01
ATTB_3777_01, Original number: 3777.01
ATTB_3785_01, Original number: 3785.01
ATTB_3792_01, Original number: 3792.01
ATTB_3793_01, Original number: 3793.01
ATTB_3796_03, Original number: 3796.03
ATTB_4578_01, Original number: 4578.01



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

TIP:
The Flybat 100 Ah battery comes in the DIN box of the 80 Ah AGM battery. This means that the cases are absoultely the same size and the AGM battery can simply be replaced by the 100 Ah lithium battery. An AGM battery can usually only be discharged up to 50%, because then the critical voltage of 10.5 volts is reached. The 100 Ah lithium battery, on the other hand, can be discharged almost completely. The exchange results in a capacity increase by a factor of 2.25. (40 Ah AGM to approx. 90 Ah lithium).

Electrical Specifications:
- Nominal Voltage: 12.8V
- Nominal Capacity: 100Ah
- Capacity @ 25A: 240min
- Energy: 1280Wh
- Resistance: 30mOhm
- Efficiency: 99%
- Self Discharge: <3% per Month
- Maximum Modules in Series/parallel: 4/4

Mechanical Specifications:
- Dimensions (LxWxH) 318mm x 175mm x 188mm
- Weight: 13.5kg
- Terminal Type: T1
- Terminal Torque: 9-11 N-m
- Case Material: ABS
- Enclosure Protection: IP56
- Chemistry: LiFePO4

Temperature Specifications:
- Discharge Temperature: -20 to 60°C
- Charge Temperature: 0 to 55°C
- Storage Temperature: -20 to 60°C
- PCM High Temperature Cut-Off: 80°C

Charge Specifications:
- Recommended Charge Current: 50A
- Maximum Charge Current: 100A
- Recommended Charge Voltage: 14.2V - 14.6V
- PCM Charge Voltage Cut-Off: 15.6V
- Reconnect Voltage: 15.2V
- Balancing Voltage: 14.4V

Discharge Specifications:
- Maximum Continuous Discharge Current: 100A
- Peak Discharge Current: 200A
- PCM Discharge Current Cut-Off: 280A (±50A)
- Recommended Low Voltage Disconnect: 11V
- PCM Discharge Voltage Cut-Off: 8V
- Reconnect Voltage: 9.2V
- Short Circuit Protection: Yes

Advantages of FLYBAT lithium iron phosphate (LiFePO4) batteries:
- 5 year manufacturer's warranty
- The safest technology, without the risk of fire or explosion
- Integrated BMS
- Long service life
- 99% efficient
- High stability even under extreme load
- No memory effect- no need for full charge and discharge cycles
- High performance even under extreme conditions
- Deep and steady discharge and charging efficiency
- Small size and light weight

For winter operation, please see the information sheet:
"FLYBAT Winter Operation.pdf".

*************************************************************************************************
Product safety information:
Brand: Flybat
Manufacturer: BVD GmbH, Riedacker 5, 74889 Sinsheim , bvd@bvd-batterien.de
*************************************************************************************************