CAN BUS interface AUDI Quadlock

Excellent roof antenna with the following features:
-flat angle of only 70 degrees, also ideal for front mounting if roof is not exactly horizontal.
- Antenna with short rod, length approx. 23 cm, in 16 V design.
- DAB+ reception 174-237 MHz & 1452-1492 MHz
- VHF/FM reception 87-108 MHz
- 12 V external power supply (no phantom powering possible)
- Low installation depth approx. 16 mm
- Gain: FM: 7 dB
- Gain: DAB+: 12dB
- Power supply: 12 volts, 100 mA
- Temperature range (-40 degrees to + 85 degrees Celsius)
- Impedance: 50 Ohm (DAB+); 75-150 Ohm (FM)
- Cable to antenna:
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey , code G

Note: This antenna is delivered without cable!

Recommended LOWLOSS extension cable:

9552: 5 metre lowloss cable for VHF/FM (with Fakra socket and DIN plug) and 5 metre lowloss cable for DAB+ (with Fakra socket and SMB socket.
9572: 7.5 metre lowloss cable for VHF/FM (with Fakra socket and DIN plug) and 7.5 metre lowloss cable for DAB+ (with Fakra socket and SMB socket).

or UNI LOWLOSS sets with different connectors for FM. With this cable set, 99% of the car radios on the market can be connected with our antennas. The sets consist of 2 LowLoss antenna cables with Fakra colour coding for VHF and DAB+.

- Lowloss cable Fakra socket - Fakra socket, beige
- Lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey
Adapter for VHF:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

Variants:
UNI-2L500: Set with 5 m cable length
UNI-2L750: Set with 7,5 m cable length
UNI-2L1000: Set with 10,0 m cable length

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punching and bending technology by Rosenberger (Fakra-SF).

Technical data of the low loss cable:

Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional
tinned copper braiding
Outer diameter: 3.6 mm

This antenna is also available with high quality LowLoss antenna extensions, (radio side DIN plug for FM and SMB socket for DAB+):

DZ_2113_52 with 2 extension cables 5.0 m (DIN plug/SMB socket).
DZ_2113_72 with 2 extension cables 7.5 m (DIN plug/SMB socket)
DZ_2113_L500 with 2 extension cables 5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L750 with 2 extension cables 7.5 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)
DZ_2113_L1000 with 2 extension cables 10 m and 2 adapters (DIN plug/ISO plug/Fakra socket/SMB socket)


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Adapter set no. 12 for splitters with fakra plug on the housing and radios with DIN/ISO or Fakra connections:

Content:
8524 Fakra socket DIN plug
8514 Fakra socket DIN socket
8525 Fakra socket ISO plug
8555 Fakra socket ISO socket
8529 Fakra socket Fakra socket
8526 Fakra socket SMB socket
8527 Fakra socket SMA plug

Packaging:
bag with label!

Made in Europe!

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Generates an additional DAB/DAB+ signal from an FM/VHF antenna.
Connections to the radio:
Fakra plug
DAB/DAB+: Fakra plug
Connection to the antenna: Fakra plug

Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. In the case of a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551.
For adaptation to radios with ISO and DIN connectors we recommend the complete kits
41121, 41122 and 41123 or the use of the following adapters:

(not included in delivery):
8524 Fakra socket DIN plug
8514 Fakra socket DIN socket
8525 Fakra socket ISO plug
8555 Fakra socket ISO socket
8526 Fakra socket SMB socket
8527 Fakra socket SMA plug

8529 Fakra socket to Fakra socket

Technical data:
Frequencies/amplification:

AM=0.15-1.71MHz, 25 dB +/-1
FM=87,5-108MHz, 13,5 dB +/-1
III Band=174-240 MHz, 21 dB +/-1
L BAND=1452-1492 MHz, 14 dB +/-1

Current consumption: 110 mA
Impedance: 50 Ohm

Also known under Art. No. 7561004

*************************************************************************************************
Product safety information:
Brand: Calearo
Manufacturer: MTA S.p.A., V.le dell'Industria, 12 - 26845 Codogno (LO) – ITALY, info@mta.it
*************************************************************************************************