Antenna extension Fakra socket - SMB socket, 500 cm

Professional antenna for optimum reception of VHF/DAB+ and GPS/GLONASS for front installation on vans. Antenna with the following features:

- Flat angle of only 25 degrees.
- Antenna with optimised rod, length approx. 41.5 cm, in 16 V design.
- DAB+ reception 174-237 MHz & 1452-1492 MHz
- VHF/FM reception 87-108 MHz
- GPS/GLONASS 1575.42 MHz
- 12 V external power supply (no phantom power possible)
- Low installation depth approx. 16 mm
- Gain: FM: 15 dBi
- Gain: DAB+: 18dBi
- Gain: GPS+: 29dBi
- Power supply: 12 volts, 100 mA
- Temperature range (-40 degrees to + 85 degrees Celsius)
- Impedance: 50 Ohm
- Cable to antenna:
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G
- Cable: RG 174, GPS/GLONASS,+ 300 mm, fakra plug, blue, code C

Note: This antenna is delivered without cable!

Recommended LOWLOSS extension cable:

For FM and DAB+:

UNI-2L350:
UNI LOWLOSS set with different connectors for FM. With this cable set, 99% of the car radios on the market can be connected with our antennas. The set consists of 2 LowLoss antenna cables with Fakra colour coding for VHF and DAB+.

- VHF lowloss cable Fakra socket - Fakra socket B, white
- DAB+ lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey
Adapter for FM:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

For GPS/GLONASS:

UNI-3L350:
GPS connection cable set. Universal set for 99% of all devices!

Completely blue colour coding according to fakra standard to avoid signal confusion.

- 3.5 metre RG174 cable fakra socket - fakra socket, fakra C, blue
- Adapter RG174 Fakra plug - GT5 socket for GPS connection of e.g. Alpine, Kenwood and Clarion devices.
- Adapter RG174 Fakra plug - GT16 socket for the GPS connection of e.g. Pioneer devices.

Other variants:



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************
FM/DAB+:
UNI-2L500: Set with 5 m cable length
UNI-2L750: Set with 7.5 m cable length
UNI-2L1000: Set with 10.0 m cable length

GPS/GLONASS:
UNI-3L500: Set with 5 m cable length
UNI-3L750: Set with 7.5 m cable length
UNI-3L1000: Set with 10.0 m cable length

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punching and bending technology by Rosenberger (Fakra-SF).

Technical data of the low loss cable:

Characteristic impedance: 50 Ohm
d capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

For branded devices that only require an opening of 98 x 172.5 mm. With metal brackets and screws. Double DIN facia adapter for the new FIAT DUCATO, model year 2022.

Dimensions of the facia adapter:

Largest width visible: 245 mm (top)
Largest width with retaining lugs: 281 mm
Largest height visible: 159 mm
Difference to other solutions, such as 13550 or 13552:
Most double DIN radios are mounted as follows, e.g. for 13500 and 13552:
1. mounting of the plastic facia adapter.
2. insert the sheet metal basket into the plastic cover from the front and fix it by bending over various tabs.
3. Install the metal clips supplied with the metal basket on the side of the radio.
4. Push the radio into the metal basket from the front until the metal clips snap into place.
5. Cover the gap between the radio front and the plastic cover with the cover frame supplied with the metal basket.

In the case of the 60144 panel shown here, the radio is mounted from behind against the panel and finally installed in the dashboard together with the plastic panel.
This eliminates the need for the inner cover of the facia adapter as described in item 5 above and makes the installation look a bit more shapely.
Please note that this is possible with most branded radios if you have the taper in the front to 98 x 172.5 mm. Some so-called Chinese radios do not have this taper.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************