Antenna adapter DIN socket - SMB socket

Generates an additional DAB/DAB+ signal from a passive FM/VHF antenna. Amplification FM/UKW and DAB+ 20dB each Connections to the radio: DIN plug SMB socket Connection to antenna: DIN socket Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. With a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551, as any phantom voltage from the radio is not passed through. The best results are achieved when the splitter is combined with a passive FM/UKW/DAB antenna: - 16 V antenna: ATTB_2116_01 - Flex antenna with adjustable rod from 10-115 degrees: ATTB_3940_01 - Shark/shark antenna: ATTB_3759_01 These antennas always have a piece of cable 40cm with a Fakra socket. You can then use a possibly existing Fakra cable or bring the signal into the dashboard with the extension cable Dietz: 8479 (Fakra plug - DIN plug, length 5 metres). Connect the splitter there. If the radio has an ISO antenna connection for FM, you will also need the adapter, Dietz 8300.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Premium Aktivsplitter der neuesten Generation. Generiert aus den Scheiben-UKW-Antennen der nachfolgend aufgeführten Fahrzeuge zusätzlich ein DAB/DAB+ Signal.



Anschlüsse:
Eingang: Spezifischer Porsche-Antennenstecker für die Scheibenantenne
Ausgang DAB+: SMB Buchse
Ausgang UKW: DIN-Stecker

Für folgende Porsche Modelle mit PCCM Systemen und 1-DIN Schacht:

Zum Einbau in: Porsche 911F (1965 - 1973)
Porsche 911 (1974 - 1983)
Porsche 911 Turbo (1975 - 1989)
Porsche 911 Carrera (1984 - 1989)
Porsche 914 (1970 - 1976)
Porsche 914/6 (1970 - 1972)
Porsche 924 (1976 - 1985)
Porsche 924 S (1986 - 1988)
Porsche 924 Turbo (1979 - 1982)
Porsche 928 (1978 - 1982)
Porsche 928 S (1980 - 1986)
Porsche 928 S4 (1987 - 1991)
Porsche 928 GTS (1992 - 1995)
Porsche 944 (1982 - 1985)
Porsche 944/2 (1986 - 1989)
Porsche 944 Turbo (1985 - 1991)
Porsche 944 S (1987 - 1988)
Porsche 944 S2 (1989 - 1991)
Porsche 959 (1987 - 1988)
Porsche 964 (911) C2 / C4 / RS (1990 - 1994)
Porsche 964 (911) Turbo (1991 - 1994)
Porsche 968 (1992 - 1995)
Porsche 993 (911) C2 / C4 / RS (1994 - 1998)
Porsche 993 (911) Turbo (1995 - 1998)

Hinweis:
Der originale Antennenverstärker dieser Fahrzeuge muss entfernt werden und stattdessen durch diesen Premium-Aktivsplitter ersetzt werden.

Eine detailierte Einbauanleitung am Beispiel des Porsche 964 (911) liegt dem Produkt in Papierform bei.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Active radio distributor for the vehicle or house interior with the following functions and features:
- Distribution of analogue radio and DAB, DAB+ frequency ranges
- Improvement of the reception quality of passive radio antennas
- Simple and quick mounting
- Cable type: RG 174
- Services: AM/FM, DAB, DAB+
- Connectors: SMB(f), DIN 41585(f), DIN 41585(m)

Note:
- The product is intended for typical roof/fender antennas.
- Do not use with integrated glass or active roof antennas

Additional information:
- Mounting: adhesive/screw mounting
- Additional info: Crossover
- Category/Special feature: Active crossover for passive single-cable solution

Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. With a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551, as any phantom voltage from the radio is not passed through.

The best results are achieved when the splitter is combined with a passive FM/UKW/DAB antenna: - 16 V antenna: ATTB_2116_01 - Flex antenna with adjustable rod from 10-115 degrees: ATTB_3940_01 - Shark/shark antenna: ATTB_3759_01 These antennas always have a piece of cable 40cm with a Fakra socket. You can then use a possibly existing Fakra cable or bring the signal into the dashboard with the extension cable Dietz: 8479 (Fakra plug - DIN plug, length 5 metres). Connect the splitter there. If the radio has an ISO antenna connection for FM, you will also need the adapter, Dietz 8300.

Original article number: 4726.01

*************************************************************************************************
Product safety information:
Brand: ATTB
Manufacturer: ATTB Antennentechnik Bad Blankenburg GmbH, Gewerbegebiet 2, 07407 Rudolstadt, info@attb.de
*************************************************************************************************