Aerial jack, screwable, DIN standard, Content: 1 Piece

Professional version for cigarette lighter plugs up to a maximum of 20 amps charging current and 12 volts.

A rubber cover is included to protect the charging socket, but it does not have to be fitted.

The cigarette lighter socket can be fitted with or without the rectangular cover plate. The cover plate is mounted from the front over the charging electronics.

Technical data:

Input voltage: 12 volts
Max. Current: 20 amps
Connections: 2 x 6.3 mm flat plug
Colour black matt

Charging socket dimensions:

Total length: 52 mm
Installation depth: 46 mm plus cable lugs
Mounting hole: 29 mm
Outer diameter: 37 mm

Dimensions of cover plate
43 x 61 mm

Further optional accessories from the 2000 series:
Art.no. 24008: Surface-mounted housing
Art.no. 24009: Double surface-mounted housing
Art.no. 24010: Double cover plate

Further products from the Series 2000:
Art.no. 24024 Double USB charging electronics (2.4 A /2.4 A)
Art.no. 24025 USB-A/USB-C charging electronics (2.4 A /3.0 A)
Art.no. 24029 12 Volt voltage indicator



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Professional version with USB-A socket and maximum 2.4 amps charging current at 5 volts output voltage and with USB-C socket with maximum 3.0 amps charging current at 5 volts output voltage. This allows 2 smartphones to be charged at the same time, for example. The USB sockets are illuminated.

A rubber cover is included to protect the USB ports, but it does not have to be fitted.

The USB charging electronics can be mounted with or without the rectangular cover plate. The cover plate is mounted over the charging electronics from the front.

Technical data:

Input voltage: 12 volts
Output voltage: 5 volts
Connections: 2 x 6.3 mm flat plug
Colour black matt

Dimensions of the charging electronics:

Total length: 59 mm
Installation depth: 52 mm plus cable lugs
Mounting hole: 29 mm
Outer diameter: 37 mm

Dimensions of cover plate;
43 x 61 mm

Further optional accessories from the 2000 series:
Art.no. 24008: Surface-mounted housing
Art.no. 24009: Double surface-mounted housing
Art.no. 24010: Double cover plate

Further products from the Series 2000:
Art.no. 24024 Double USB charging electronics (2.4 A /2.4 A)
Art.no. 24036 Charging socket for cigarette plug
Art.no. 24029 12 Volt voltage indicator


*************************************************************************************************
Angaben zur Produktsicherheit:
Marke: Lampa
Hersteller: LAMPA S.p.A., Via G. Rossa 53/55 - 46019 Viadana (MN) - Italy, info@lampa.it
*************************************************************************************************

Generates an additional DAB/DAB+ signal from a passive FM/VHF antenna. Amplification FM/UKW and DAB+ 20dB each Connections to the radio: DIN plug SMB socket Connection to antenna: DIN socket Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. With a phantom antenna, a phantom adapter must be inserted between the splitter and the antenna connection, e.g. 8551, as any phantom voltage from the radio is not passed through. The best results are achieved when the splitter is combined with a passive FM/UKW/DAB antenna: - 16 V antenna: ATTB_2116_01 - Flex antenna with adjustable rod from 10-115 degrees: ATTB_3940_01 - Shark/shark antenna: ATTB_3759_01 These antennas always have a piece of cable 40cm with a Fakra socket. You can then use a possibly existing Fakra cable or bring the signal into the dashboard with the extension cable Dietz: 8479 (Fakra plug - DIN plug, length 5 metres). Connect the splitter there. If the radio has an ISO antenna connection for FM, you will also need the adapter, Dietz 8300.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************