Main page » 5G/WLAN Router Teltonika RUTX50e with ANT515 black

5G/WLAN Router Teltonika RUTX50e with ANT515 black

5G/WLAN Router Teltonika RUTX50e with ANT515 black

Product No.:: TEL-RUTX50e-510B
Shipping time:: 1-2 days (abroad may vary)
Stock:: pieces
Weight:: 2.235 kg per piece

899,00 EUR

incl. 19% tax excl. Shipping costs

Add to wish list

Description

Description

Router - antenna - roof mount - set, perfectly matched, consisting of the following components:

Teltonika 5G/WLAN Router RUTX50
Panorama antenna ANT515B (antenna LGMDMB4-6-60-24-58 with 7-piece cable set 1.5 m)
12 volt connection, TEL-12V
Mounting kit, TEL-MON2

RUTX50 is your future-proof, multi-network industrial router, offering 5G mobile communication for high-speed and data-heavy applications.

5G dual SIM cellular communication combined with 5 Gigabit Ethernet ports and dual-band Wi-Fi enables reliable ultra-low latency data transfer.

The power of 5G technology, combined with a wide range of interfaces and industrial hardware features, ensures adaptability for future upgrades and expansions.

RUTX50 comes with the RutOS, which provides advanced security features and specialized industrial protocols for a wide range of professional application scenarios, and is compatible with our Remote Management System (RMS), for optimized remote management and monitoring capabilities of large fleets of devices.

Technical data:
- Cellular: 5G sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G (LTE) - LTE Cat 20 2.0Gbit/s DL, 200Mbit/s UL; 3G - 42Mbit/s DL, 5.76Mbit/s UL.
- CPU: Quad-core ARM Cortex A7, 717 MHz
- Flash storage: 256 MB
- RAM: 256 MB
- Power supply: 4-pin socket, 9-50 VDC
- SIM: 2 x SIM slot (Mini SIM - 2FF), 1.8 V/3 V
- Antenna connections: 4 x SMA for mobile, 2 x RP-SMA for WiFi, 1 x SMA for GNSS
- Ethernet: 5 x 10/100/1000 Ethernet ports: 1 x WAN (configurable as LAN), 4 x LAN
- WiFi: 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates of up to 867 Mbps (Dual Band,
MU-MIMO), 802.11r fast transition, access point (AP), station (STA) - Wireless networking/roaming: Wireless networking (802.11s), fast roaming (802.11r)
- GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS
- Inputs/outputs: On 4-pin socket: 1 x digital input, 1 x digital open collector output
- Other: 1 x USB host, 1 x ground screw
- Status LEDs: 3 x link status LEDs, 3 x link strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x power LED, 2 x 2.4G and 5G WiFi LEDs
- Operating temperature: -40 °C to 75 °C
- Housing: Aluminium housing, DIN rail (can be mounted on both sides), flat installation surface
- Dimensions: (W x H x D) 132 x 44.2 x 95.1 mm
- Weight: 533 g

Software:
- Operating system: RutOS (OpenWrt-based Linux OS)
- Mobile phone functions: Multiple PDN, Auto APN, band lock, SIM change, operator blacklist/whitelist, data/SMS limits.
- Network functions: Routing, failover, firewall, DHCP, DDNS, load balancing, VoIP passthrough, connection monitoring
- Monitoring and management: WEB UI, CLI, SSH, CALL, SMS, TR-069, SNMP, JSON-RPC, MQTT, MODBUS, RMS
- VPN and tunneling: OpenVPN, IPsec, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, WireGuard, ZeroTier
- Cloud solutions: RMS, FOTA, Azure IoT Hub, Cloud of Things, Cumulocity, ThingWorx
- Hotspot External/Internal Radius, SMS OTP, MAC Authentication, Walled Garden
- GNSS: NMEA forwarding, AVL, geofencing

Standard package of the router contains:

- RUTX50 Router
- 230 Voltage Power Supply, 18 W PSU
-12 Voltage cable
- Holding kit, Tel-MON2
- 4 x Mobile antennas (swivel, SMA male)
- 2 x WiFi antennas (magnetic mount, RP-SMA male, 1.5 m cable)
- 1 x GNSS antenna (adhesive, SMA male, 3 m cable)
- Ethernet cable (1.5 m)
- SIM Adapter kit
- QSG (Quick Start Guide)
- Packaging box

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Teltonika (Router und Originalzubehör)
Hersteller/Manufacturer: UAB Teltonika Networks, Baršausko g. 66, Kaunas 51436, Lietuva, info@teltonika.com
Marke/Trademark: Panorama Antennas (Antenne)
Hersteller/Manufacturer:
Panorama Antennas Ltd, 61 Frogmore London SW18 1HF, United Kingdom, sales@panorama-antennas.com
Einführer/Importer:
PUC antennas&equipment GmbH, Isaac-Newton-Straße 3, 59423 Unna, info@puc.de
Marke/Trademark: Dietz (Außenantenne und Kabel)
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Customers who bought this product bought also the following products:

StandBy-Charger PRO

The VOTRONIC StandBy Charger is used to automatically recharge and maintain the charge of the starter battery or the auxiliary battery if the mains charger, the solar charge controller or the generator only has one charging output. The device can be easily retrofitted by simply connecting it between the on-board and starter battery or on-board and auxiliary battery without having to change the existing wiring. If, for example, the mains charger is in operation and charging the on-board battery, the second battery (starter battery or auxiliary battery) is also charged with a small portion of the charging current, depending on the state of charge. This charge retention works automatically and is recognisable by an increased voltage level of the second battery. Overcharging of the second battery is impossible as the charging voltage is reduced by at least 0.6V and the charging current is limited to 3A (24V version: 2A).

PRODUCT FEATURES
- Charging converter for recharging and charge retention of the starter battery
- IU charging characteristic
- Adjustable end-of-charge voltage of 12.5 - 14.5 V
- Upward and downward conversion from input to output voltage possible
- Also works if the voltage of the battery to be supplied is lower than that of the battery to be charged
- Adjustable switch-off threshold of 12 - 14 V on the input side prevents deep discharge of the battery connected on the input side
- Suitable for lead, gel, AGM and lithium (LiFePO4) batteries on both the input and output sides
- High output current of max. 8 A
- Passive cooling without fan
- Two independent 12V control inputs:
- "EN" (enable), to activate
- "DIS" (disable) to deactivate
- Standby charger can therefore be switched on externally via switch and switched off, for example, by D+ while driving
- 2 LEDs provide information about the operating status
- Safe operation due to built-in overheating protection

However, modern lithium (LiFePO4) batteries have a significantly higher open-circuit voltage than starter batteries (lead, AGM). When using simple, unregulated and uncontrolled standby chargers, this leads to the complete discharge of the lithium supply battery. For this reason, the Standby Charger (item no. 3065 or 6065) is unfortunately not suitable for these batteries. The VOTRONIC StandBy Charger Pro, on the other hand, has an adjustable undervoltage limit at the input. Charging is interrupted if the voltage falls below this limit. This means that it can be operated without any problems on a modern lithium (LiFePO4) battery as a supply battery without running the risk of draining it completely.

Technical data:
Input "IN"
Nominal battery voltage: 12V
Input voltage range: 12...15 V
Setting range of the input-side switch-off threshold: 12...14 V
Current consumption in standby: <1 mA
Max. current consumption: 12 A
Output "OUT"
Nominal battery voltage: 12 V
Setting range of the output voltage: 12.5...14.5 V
Max. charging current: 8 A
Reduction of the max. charging current in the event of
overtemperature: 5 A
Dimensions (W x L x H): 105 mm x 71 mm x 25 mm
Weight: 92 g

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Votronic
Hersteller/Manufacturer: VOTRONIC Elektronik-Systeme GmbH, Johann-Friedrich-Diehm-Str. 2, 36341 Lauterbach, info@votronic.de
*************************************************************************************************

Art.Nr:

142,50 EUR

incl. 19% tax excl. Shipping costs

Antenna adapter FAKRA socket - DIN socket...

Adapter for connecting an antenna with 150 Ohm connection to a radio with FAKRA connection.
Content: 1 piece

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr:

8,48 EUR

incl. 19% tax excl. Shipping costs

D+ Simulator Pro

The VOTRONIC D+ Simulator Pro generates the control signal by detecting the vibrations of the running engine. It works fully automatically and independently of the charging operation of the alternator and is therefore particularly suitable for vehicles that have an alternator management system, e.g. vehicles that comply with the Euro 6 standard. With its low current consumption of less than 3mA, it meets the requirements of DIN EN 13976.

Battery voltage [V]: 12/24
Switching output: switching, max. 300 mA
Switching waves on/off: 4s.../10s...5min
Self-consumption [mA]: <3
Weight: [g]: 100

Dimensions (cylinder): 43 x 25 mm (connecting cable 2 m long)
Mark of conformity: CE, E-test (EMC/vehicle directive).
Protection class: IP64

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Votronic
Hersteller/Manufacturer: VOTRONIC Elektronik-Systeme GmbH, Johann-Friedrich-Diehm-Str. 2, 36341 Lauterbach, info@votronic.de
*************************************************************************************************

Art.Nr:

90,90 EUR

incl. 19% tax excl. Shipping costs

Connection set for Panorama 5G antenna, 7...

Antenna connection set for Panorama Antennas:

Contents:
1 cable with SMA socket - SMA plug labelled "LTE/5G MAIN 1".
1 cable with SMA socket - SMA plug labelled "LTE/5G ANT 2
1 cable with SMA socket - SMA plug labelled "LTE/5G ANT 3
1 cable with SMA socket - SMA plug labelled "LTE/5G ANT 4
1 cable with SMA socket RP - SMA plug rerverse pole labelled with "WLAN MAIN 1".
1 cable with SMA socket RP - SMA plug Rerverse pole labelled "WLAN ANT 2
1 cable with SMA socket - SMA plug labelled "GPS

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punch-bend technology of the Rosenberger company(Fakra-SF).

Technical data:

Length: 1.5 metres
Characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Ideal to connect the following 5G antennas from Panorama Antennas to routers from Teltonika and equivalents.

The cable set is only usable for the following antennas:
PAN-ANT510
PAN-ANT510B

*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Art.Nr:

199,00 EUR

incl. 19% tax excl. Shipping costs