D_CAB_DBUA1
Antenna power supply 2 pole
D_CAB_DBUA1

Antenna power supply 2 pole

Product No.:
D_CAB_DBUA1
1-2 days 1-2 days  (abroad may vary)
Weight:
0.005 kg per piece
9,95 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Description
Replacement cable for antenna power from DBU3GEN.

Customers who bought this product bought also the following products:

LowLoss extension SMB socket - FAKRA socket, 150 cm
LowLoss extension SMB socket - FAKRA socket,...
LowLoss cables are the cables with the best electrical characteristics for lossless transmission of antenna signals. Our Lowloss cable series has the best conductivities and therefore the lowest cable resistance of all our cable series. They are achieved by using tinned leads for the inner conductor (7 * d = 0.25mm), shielding (42 * d = 0.11mm) and an additional aluminum foil between the PE dielectric and the shield.

Specifications:

Length: 1,5 meters
Characteristic impedance: 50 ohms Capacity: 95pF / m Advanced POLYTHEN insulation 2.00 mm
Aluminum foil screen and additional tinned copper braid
Outer diameter: 3.6 mm

Specially designed for loss-free transmission of FM/UKW signals from antenna Blankenburgantennen or all other antennas that have a Fakra plug for FM/UKW.

Art.Nr:

14,99 EUR
incl. 19% tax excl. Shipping costs
LowLoss extension SMB socket - FAKRA socket, 300 cm
LowLoss extension SMB socket - FAKRA socket,...
Low-loss cables (...little loss cables) are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has best conductance values and therefore lowest cable resistances. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield.
Technical data:

Length: 3.00 meters
characteristic impedance: 50 Ohm
Capacity: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braid
Outer diameter: 3.6 mm

Specially designed for loss-free transmission of FM/UKW signals from antenna Blankenburgantennen or all other antennas which have a Fakra connector for FM/UKW

Art.Nr:

19,99 EUR
incl. 19% tax excl. Shipping costs
Phantom adapter SMB male- SMB female with additional ground
Phantom adapter SMB male- SMB female with...
Phantom feed adapter - power supply for active antennas with antenna amplifier. For feeding the phantom signal into retrofit devices without own feed and with SMB connection.
Some retrofit devices have a bad ground at the SMB output. With the help of the black ground cable the ground potential can be improved.

The adapter is also suitable for our antenna measuring devices 15991 and D_DBU3GEN_dB. These measuring devices do not output phantom voltage. With the help of this adapter also active antennas can be measured. The adapter outputs 12 Volt phantom power at the SMB connector. We recommend to use the adapter with a Zig-plug. (see additional picture)

Connections on the adapter:
Auto side: SMB connector
On the radio side: SMB socket
Red cable: 12 Volt
Black cable: ground

Art.Nr:

14,99 EUR
incl. 19% tax excl. Shipping costs