LowLoss extension SMB socket - FAKRA socket, 300 cm

High-quality DAB+ splitter including two downstream amplifiers from Antenne Bad Blankenburg, Art. No. 4721.50

The only difference between version 4721.50 and the previous version is that the power is supplied via the phantom power of the DAB+ radio output of the radio. This eliminates the previous red connection cable and saves installation time.

If the phantom power is deactivated in the menu of the car radio, please switch it on in the menu.

Connections:

Curry: Connection for the car antenna
Black: Digital radio
White: FM (FM/AM)

Generates an additional DAB/DAB+ signal from an FM/FM antenna.
Connections to the radio:
FM/UKW: 150 Ohm DIN plug
DAB/DAB+: SMB Female (female)
Connector to antenna: 150 Ohm female

Also works with active FM/UKW antennas if the antenna itself does not filter the frequency band. If a phantom antenna is used, a phantom adapter must be inserted between the splitter and the antenna connector, e.g. 8551.
The following adapter cables are included in the scope of delivery:
8524 Fakra socket DIN plug
8514 Fakra socket DIN socket
8526 Fakra socket SMB socket

Shark Fin roof antenna with the following functions and features:
- DAB reception, active and low-noise in band III.
- Radio reception, active and low-noise for AM/FM
- 12V power supply either via inner conductor of cable connections (phantom power) or via DIN plug-in sleeve
- Can be fitted to new Mercedes Benz (MB), VW/Audi hole patterns (sealing adapter available: 4624_01 (MB) 4625_01 (VW/Audi))
- Low installation depth (16.5 mm)
- Cable type: RG 174
- Services: AM/FM, DAB+
- Connectors: FAKRA(m) G, FAKRA(m) B

Additional information:
- Mounting: Roof mounting
- Additional info: Roof antenna, active
- Category/special feature: active Sharkfin antenna with separate signal routing, for VW/Audi, MB, phantom or external power supply

Dimensions:
- Width: 65 mm
- Height: 70 mm
- Length: 104 mm
- Weight: 0.179 kg

LowLoss cables are the cables with the best electrical characteristics for lossless transmission of antenna signals. Our Lowloss cable series has the best conductivities and therefore the lowest cable resistance of all our cable series. They are achieved by using tinned leads for the inner conductor (7 * d = 0.25mm), shielding (42 * d = 0.11mm) and an additional aluminum foil between the PE dielectric and the shield. Only high quality Fakra connectors and sockets from Rosenberger are used. They have an excellent workmanship and fit through a special punch-bending technology (Fakra-SF).

Specifications:

Length: 3 meters
Characteristic impedance: 50 ohms Capacity: 95pF / m Advanced POLYTHEN insulation 2.00 mm
Aluminum foil screen and additional tinned copper braid
Outer diameter: 3.6 mm