DUCATO 9 (2024-)

For steering wheel remote control interface of the 69xxx series, if specified. The coding to different radio brands is achieved by resolving different bridges. Please refer to the operating instructions.

Can be used for the following radio brands:

Alpine
Blaupunkt 2-DIN devices from approx. 2015 (except models of the 990 series)
Chinese radios (without guarantee!)
Clarion
JVC
Kenwood
Pioneer (also for newer Pioneer radios from 2021/2022 of the series SPH-DA160DAB, DMH-A340DAB), Audiovox, Dynavin
Macrom
Sony
Zenec
XZENT

Content: 1 piece

Comment and feedback from a customer for XZENT:
For XZENT radios X-F220 and X-F270:
The two front phone buttons only work with the shown setting of the old Fiat steering wheel. (The old steering wheel is shown in the radio menu). With the F270 only with steering wheel mode 1, with mode 2 the two buttons are without function.



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Double DIN facia adapter for the new FIAT DUCATO 8, model year 2022.
Dimensions of the facia adapter:
Largest width visible: 240 mm
Largest width with eyelets: 277 mm
Largest height visible: 154 mm
Recess for sheet metal frame: 183 mm (width), 112 mm (height)

Corresponds to the dimension for double ISO frame, our Art. No. BOA_24430_02. Please order the metal frame separately, if not already included with the radio. The optional set BOA_24430_02 contains the sheet metal frame, the metal brackets for the connection to the radio incl. screws, 2 unlocking keys and the matching plastic frame to cover the remaining gap of 7-10 mm for the insertion of the unlocking keys.

Most double DIN radios are mounted as follows, e.g. 13550 and 13552:
1. mounting of the plastic cover.
2. insert the sheet metal basket into the plastic panel from the front and fix it by bending over various tabs.
3. Install the metal clips supplied with the metal basket on the side of the radio.
4. Push the radio into the metal basket from the front until the metal clips snap into place.
5. Cover the gap between the radio front and the plastic panel with the cover frame supplied with the metal basket.

The sheet metal frames supplied with the radio cannot usually be used!
Note: The facia adapter 13550 and 13552 differ only in design! With the facia adapter 13552 there is a little more installation depth.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

1-DIN facia adapter with removable pocket for the new FIAT DUCATO 8, model year 2022.
Color: PIANO BLACK

Dimensions of the facia adapter:

Largest width visible: 245 mm (top)
Largest width with retaining lugs: 281 mm
Greatest height visible: 159 mm
Recess for sheet metal frame: 183 mm (width), 52 mm (height)
Storage compartment: 177 mm (width), 47 mm (height)


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

ISO extension harness with switch on 80cm extension for manually switching on radio without having the vehicles ignition on. Commonly used on camper vans and motor homes to be able to listen to the radio when parked without having to have the ignition on or engine running.

Suitable for vehicles with a permanent 12v feed to the radio using standard ISO connections.

ISO extension measures 20cm and extension for rocker switch measures 80cm with I/O markings on rocker switch as pictured.

A blocking diode prevents continuous current being fed back into the vehicles electrical system.

The switch needs a 20mm hole to fit and a minimum mounting depth of 38mm

WARNING: Running the radio without the engine to charge the battery by the alternator or running or an external battery charger will discharge the battery.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Man möchte das Radio im Stand nicht mit der Starterbatterie, sondern mit der Aufbaubatterie versorgen?
Kein Problem mit diesem zweiteiligen Kabelsatz!

Standardfunktion 1: Nur der ISO-Kabelsatz wird verwendet!

ISO-Verlängerungskabel mit Schalter an der 80 cm langen Verlängerung zum manuellen Einschalten des Radios, ohne dass die Zündung des Fahrzeuges eingeschaltet ist. Wird häufig in Wohnmobilen verwendet, um Radio hören zu können, wenn das Fahrzeug geparkt ist, ohne dass die Zündung eingeschaltet ist oder der Motor läuft.

Geeignet für Fahrzeuge mit einer permanenten 12-Volt-Versorgung des Radios über Standard-ISO-Anschlüsse.

Die ISO-Verlängerung misst 20 cm und die Verlängerung für den Wippschalter misst 80 cm. Ein/Aus-Markierungen auf dem Wippschalter wie abgebildet.

Eine Sperrdiode verhindert, dass Dauerstrom in das elektrische System des Fahrzeugs zurückgespeist wird.

Der Schalter benötigt eine 20mm Bohrung und eine minimale Einbautiefe von 38mm.

WARNUNG: Wenn das Radio ohne Motorlauf betrieben wird, und kein Ladegerät angeschlossen ist, wird die Batterie entladen.

Komfortfunktion 2:

Das Autoradio wird mit Dauerplus nur über die Aufbaubatterie versorgt. Beide Kabelsätze werden verwendet. Im ISO-Kabelsatz wird die gelbe Leitung (Dauerplus) unterbrochen. An den gelben Stecker wird das 2,9 m lange rote Kabel angeschlossen. Es kann direkt an den oft verbauten Schaudt Elektroblock angeschlossen werden oder über eine Sicherung direkt an die Aufbaubatterie angeschlossen werden. Die gelbe Buchse vom 16 poligen ISO Stecker bleibt unbenutzt.

Funktion des Schalters:

Schalter EIN:
Zündung wird simuliert vom Dauerplus der Aufbaubatterie über Schalter. Das Radio wird komplett über die Aufbaubatterie versorgt.

Schalter AUS:
Radio geht nur an, wenn die Zündungspannung vom Fahrzeug kommt, also während der Fahrt.

Bei Schalterstellung EIN und Zündung an erhält das Radio aus beiden Batterien seinen Strom. 2 Dioden in Gegenrichtung verhindern, dass Strom von der Starterbatterie in die Aufbaubatterie und umgekehr fließt.

Zusatzkabel am 2,9 m langen Kabel.

Blau/weißes Kabel: Manche Radios benötigen noch ein Rückwärtsgangsignal. Dieses kann im Sicherungskasten abgegriffen werden, wie in der Anleitung erklärt.

Blau/schwarzes Kabel: Dieses Kabel ist für Zusatzanwendungen vom Sicherungskasten zum Radioschacht als Reservekabel bereits ergänzt, bleibt in den meisten Fällen unbenutzt.

Rotes Kabel. An diesem Kabel ist bereits der passende PIN für den Schaudt EBL angecrimpt. Siehe Anleitung. Ist kein Schaudt EBL vorhanden, kann das Kabel direkt an den Pluspol der Aufbaubatterie angeschlossen werden. Im letzten Fall unbedingt eine Sicherung, spätestens 20 cm nach dem Pluspol einfügen.

Inhalt:

- ISO Kabelsatz mit Schalter
- Zusatzkabelsatz für die Verbindung zur Aufbaubatterie
- Steckergehäuse


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

For branded devices that only require an opening of 98 x 172.5 mm. With metal brackets and screws. Double DIN facia adapter for the new FIAT DUCATO, model year 2022.

Dimensions of the facia adapter:

Largest width visible: 245 mm (top)
Largest width with retaining lugs: 281 mm
Largest height visible: 159 mm
Difference to other solutions, such as 13550 or 13552:
Most double DIN radios are mounted as follows, e.g. for 13500 and 13552:
1. mounting of the plastic facia adapter.
2. insert the sheet metal basket into the plastic cover from the front and fix it by bending over various tabs.
3. Install the metal clips supplied with the metal basket on the side of the radio.
4. Push the radio into the metal basket from the front until the metal clips snap into place.
5. Cover the gap between the radio front and the plastic cover with the cover frame supplied with the metal basket.

In the case of the 60144 panel shown here, the radio is mounted from behind against the panel and finally installed in the dashboard together with the plastic panel.
This eliminates the need for the inner cover of the facia adapter as described in item 5 above and makes the installation look a bit more shapely.
Please note that this is possible with most branded radios if you have the taper in the front to 98 x 172.5 mm. Some so-called Chinese radios do not have this taper.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

For branded devices that only require an opening of 98 x 172.5 mm. With metal brackets and screws. Double DIN facia adapter for the new FIAT DUCATO, model year 2022.

Dimensions of the facia adapter:

Largest width visible: 245 mm (top)
Largest width with retaining lugs: 281 mm
Largest height visible: 159 mm
Difference to other solutions, such as 13550 or 13552:
Most double DIN radios are mounted as follows, e.g. for 13500 and 13552:
1. mounting of the plastic facia adapter.
2. insert the sheet metal basket into the plastic cover from the front and fix it by bending over various tabs.
3. Install the metal clips supplied with the metal basket on the side of the radio.
4. Push the radio into the metal basket from the front until the metal clips snap into place.
5. Cover the gap between the radio front and the plastic cover with the cover frame supplied with the metal basket.

In the case of the 60144 panel shown here, the radio is mounted from behind against the panel and finally installed in the dashboard together with the plastic panel.
This eliminates the need for the inner cover of the facia adapter as described in item 5 above and makes the installation look a bit more shapely.
Please note that this is possible with most branded radios if you have the taper in the front to 98 x 172.5 mm. Some so-called Chinese radios do not have this taper.


*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************

Can Bus -steering wheel interface for remote control of the most important functions of a radio, such as volume up, volume down, search function forward, search function back, mute (mute) and source (source selection) if available in the vehicle and supported by the respective radio brand. These 6 buttons are located on the back of the steering wheel, 3 on top of each other on the right and left side of the steering wheel. The telephone buttons on the front side of the steering wheel are also supported by this solution, if they are also supported by the radio protocol.

At the interface are still the following cables, which are connected as follows:
Speed: cable color pink
Handbrake: cable color green
For these functions the longer pink cable must be additionally pinned to the fuse box as described in the manual.

Reverse signal: cable color violet
For this function, the loose violet cable must additionally be pinned to the fuse box, as described in the instructions.

Only for vehicles with so-called camp preparation, i.e. for vehicles without radio ex works!

Important note: Please note that the gray 6-pin connector of the interface in the vehicle may only be connected to the also gray connector and not to the orange connector.

The interface is delivered with a plug & play cable set for the main functions. Some cables must be connected to the fuse box as described above.

For the following vehicles :

FIAT:
Ducato 8 (model year 2022-)

For the interface a radio specific adapter cable is still needed:

ALPINE (69001)
BLAUPUNKT (69002) (2-DIN devices from approx. 2015 except series 990)
KENWOOD (69005)
PIONEER, AUDIOVOX, DYNAVIN, MAC AUDIO (69021)
SONY (69006)
ZENEC (69029)

or universal cable 69111

Note: This interface supports only the above radio brands. The use of the universal cable 69111 is only possible for the above mentioned brands.



*************************************************************************************************
Angaben zur Produktsicherheit/GPSR:
Marke/Trademark: Dietz
Hersteller/Manufacturer: Audiotechnik Dietz Vertriebs-GmbH, Maybachstr. 10, 67269 Grünstadt,
www.dietz.biz, verkauf@dietz.biz
*************************************************************************************************