DUCATO (2006-2021) Radiovorb.

To cover / close a 1 DIN radio shaft.
Fixation by plastic claws on the backside.

Note: Fits well with double ISO panels with center bar for 1-DIN frames, e.g. Golf 5 and Golf 6 or Fiat Ducato to close one or both compartments.

ISO extension harness with switch on 80cm extension for manually switching on radio without having the vehicles ignition on. Commonly used on camper vans and motor homes to be able to listen to the radio when parked without having to have the ignition on or engine running.

Suitable for vehicles with a permanent 12v feed to the radio using standard ISO connections.

ISO extension measures 20cm and extension for rocker switch measures 80cm with I/O markings on rocker switch as pictured.

A blocking diode prevents continuous current being fed back into the vehicles electrical system.

The switch needs a 20mm hole to fit and a minimum mounting depth of 38mm

WARNING: Running the radio without the engine to charge the battery by the alternator or running or an external battery charger will discharge the battery.

One-piece professional panel that does not require the narrow scope of the original aftermarket radios. Fits all Fiat Ducato from 2011, when a factory OEM radio was installed. Color: black, piano paint
Ducato III 250/251 (2006-2011)
Ducato III 250/251 (2011-2014)
Ducato III 250/251 (2014-2021)
Citroen Jumper II 250/250D/250L (ab 2006)
Peugeot Boxer II 250/251 (ab 2006)

Passend für:
Ducato III 250/251 (2006-2011)
Ducato III 250/251 (2011-2014)
Ducato III 250/251 (2014-)
Citroen Jumper II 250/250D/250L (ab 2006)
Peugeot Boxer II 250/251 (ab 2006)
Color: black, mat

For : Citroen:
Relay 2 (2006 - 2011)

Fiat :
Multipla (2000 - 2010)
Panda 2 (2004 - 2011 )
Ducato Mk2 (2006 - 2011)

Peugeot :
Boxer 2 (2006 - 2011)

This cable uses the 20 way mini iso connector in the car to connect to the steering wheel buttons. To use the interface a head unit specific adaptor cable is needed:

Alpine (67001)
Blaupunkt 2-DIN from 2015 on (67021)
Clarion (67003)
JVC (67004)
Kenwood (67005)
Sony / Pioneer / Dynavin /AUDIOVOX / MAC AUDIO (67021)
Zenec (67029)

Content: 1 pc

For:
FIAT:
Ducato (2014-)
Cars with open-dash, without original radio/ with MINI ISO plug
To use the interface a head unit specific adaptor cable is needed:
ALPINE (69001)
BLAUPUNKT (69002, only new 2-DIN or double-DIN radios from 2015 on 69002)
CLARION (69003)
KENWOOD (69005)
PIONEER, AUDIOVOX, MAC AUDIO (69021)
Zenec (69029)
China radios with key1 and key2 wires
Content: 1 piece

Professional antenna for optimum reception of VHF/DAB+ and GPS/GLONASS for front installation on vans. Antenna with the following features:

- Flat angle of only 25 degrees.
- Antenna with optimised rod, length approx. 41.5 cm, in 16 V design.
- DAB+ reception 174-237 MHz & 1452-1492 MHz
- VHF/FM reception 87-108 MHz
- GPS/GLONASS 1575.42 MHz
- 12 V external power supply (no phantom power possible)
- Low installation depth approx. 16 mm
- Gain: FM: 15 dBi
- Gain: DAB+: 18dBi
- Gain: GPS+: 29dBi
- Power supply: 12 volts, 100 mA
- Temperature range (-40 degrees to + 85 degrees Celsius)
- Impedance: 50 Ohm (DAB+); 75-150 Ohm (FM)
- Cable to antenna:
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G
- Cable: RG 174, GPS/GLONASS,+ 300 mm, fakra plug, blue, code C

Note: This antenna is delivered without cable!

Recommended LOWLOSS extension cable:

For FM and DAB+:

UNI-2L350:
UNI LOWLOSS set with different connectors for FM. With this cable set, 99% of the car radios on the market can be connected with our antennas. The set consists of 2 LowLoss antenna cables with Fakra colour coding for VHF and DAB+.

- VHF lowloss cable Fakra socket - Fakra socket B, white
- DAB+ lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey
Adapter for FM:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

For GPS/GLONASS:

UNI-3L350:
GPS connection cable set. Universal set for 99% of all devices!

Completely blue colour coding according to fakra standard to avoid signal confusion.

- 3.5 metre RG174 cable fakra socket - fakra socket, fakra C, blue
- Adapter RG174 Fakra plug - GT5 socket for GPS connection of e.g. Alpine, Kenwood and Clarion devices.
- Adapter RG174 Fakra plug - GT16 socket for the GPS connection of e.g. Pioneer devices.

Other variants:

FM/DAB+:
UNI-2L500: Set with 5 m cable length
UNI-2L750: Set with 7.5 m cable length
UNI-2L1000: Set with 10.0 m cable length

GPS/GLONASS:
UNI-3L500: Set with 5 m cable length
UNI-3L750: Set with 7.5 m cable length
UNI-3L1000: Set with 10.0 m cable length

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our Lowloss cable series has the best conductivity values and thus the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punching and bending technology by Rosenberger (Fakra-SF).

Technical data of the low loss cable:

Characteristic impedance: 50 Ohm
d capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm

Professional antenna for optimum reception of VHF/DAB+ and GPS/GLONASS for front installation on vans. Antenna with the following features:

-flat angle of only 25 degrees.
- Antenna with optimised rod, length approx. 41.5 cm, in 16 V design.
- DAB+ reception 174-237 MHz & 1452-1492 MHz
- VHF/FM reception 87-108 MHz
- 12 V external power supply (no phantom powering possible)
- Low installation depth approx. 16 mm
- Gain: FM: 7 dB
- Gain: DAB+: 12dB
- Power supply: 12 volts, 100 mA
- Temperature range (-40 degrees to + 85 degrees Celsius)
- Impedance: 50 Ohm (DAB+); 75-150 Ohm (FM)
- Cable to antenna:
- Cable: RG 174, FM 300 mm, Fakra plug, white, code B
- Cable: RG 174, DAB+ 300 mm, Fakra plug, grey, code G
- Cable: RG 174, GPS/GLONASS,+ 300 mm, fakra plug, blue, code C

Note: This antenna is delivered with the following cable sets in 3.5 m length!

Recommended LOWLOSS extension cables:

For FM and DAB+:

UNI-2L350:
UNI LOWLOSS set with different connectors for FM. With this cable set, 99% of the car radios on the market can be connected with our antennas. The set consists of 2 LowLoss antenna cables with Fakra colour coding for VHF and DAB+.

- VHF lowloss cable Fakra socket - Fakra socket B, white
- DAB+ lowloss cable Fakra socket - SMB socket 90 degrees, Fakra G, grey
Adapter for FM:
- Adapter with lowloss fakra cable - DIN plug
- Adapter with lowloss fakra cable - ISO plug

For GPS/GLONASS:

UNI-3L350:
GPS connection cable set. Universal set for 99% of all devices!

Completely blue colour coding according to fakra standard to avoid signal confusion.

- 3.5 metre RG174 cable fakra socket - fakra socket, fakra C, blue
- Adapter RG174 Fakra plug - GT5 socket for GPS connection of e.g. Alpine, Kenwood and Clarion devices.
- Adapter RG174 Fakra plug - GT16 socket for the GPS connection of e.g. Pioneer devices.

Low-loss cables are the cables with the best electrical properties for the loss-free transmission of antenna signals. Our lowloss cable series has the best conductivity values and therefore the lowest cable resistance. They are achieved by using tinned strands for the inner conductor (7*d=0.25mm), for the shield (42*d=0.11mm) and an additional aluminium foil between the PE dielectric and the shield. Only high-quality Fakra plugs and sockets from Rosenberger are used. They have an excellent finish and fit due to a special punching and bending technology by Rosenberger (Fakra-SF).

Technical data of the low loss cable:

Characteristic impedance: 50 Ohm
d capacitance: 95pF/m
Extended POLYTHEN insulation 2.00 mm
Aluminium foil shielding and additional tinned copper braiding
Outer diameter: 3.6 mm